Evaluation of postural-assist exoskeleton for manual material handling

PurposeWork-related musculoskeletal disorders constitute a severe problem in the construction industry. Workers' lower backs are often affected by heavy or repetitive lifting and prolonged awkward postures. Exoskeletal interventions are effective for tasks involving manual lifting and repetitive movements. This study aims to examine the potential of a postural-assist exoskeleton (a passive exoskeleton) for manual material handling tasks.Design/methodology/approachFrom an experimental observation of participants, the effects of postural-assist exoskeleton on tasks and workers were measured. Associated benefits of the exoskeleton were assessed through task performance, range of motion and discomfort.FindingsFindings suggest that the exoskeleton influenced discomfort significantly, however range of motion decreased with lifting tasks. The reduced back flexion and increased hip flexion were also indicatives of the participants' responsiveness to the feedback from the exoskeleton. In addition, task completion time increased by 20%, and participants' back pain did not reduce.Research limitations/implicationsThe work tasks were performed in a controlled laboratory environment and only wearable inertia measurement units (IMUs) were used to assess the risk exposures of the body parts.Practical implicationsThis study opens a practical pathway to human-exoskeleton integration, artificial regeneration or enablement of impaired workforce and a window toward a new order of productivity scaling. Results from this study provide preliminary insights to designers and innovators on the influence of postural assist exoskeleton on construction work. Project stakeholders can be informed of the suitability of the postural assist exoskeletons for manual material handling tasks.Originality/valueLittle has been reported on the benefits and impact of exoskeletons on tasks' physical demands and construction workers' performance. This study adds value to the existing literature, in particular by providing insights into the effectiveness and consequences of the postural-assist exoskeleton for manual material handling tasks.

[1]  Pamela J. Hinds,et al.  The curse of expertise: The effects of expertise and debiasing methods on prediction of novice performance. , 1999 .

[2]  M. de Looze,et al.  Assessment of an active industrial exoskeleton to aid dynamic lifting and lowering manual handling tasks. , 2018, Applied Ergonomics.

[3]  Eric B. Weston,et al.  Impact of two postural assist exoskeletons on biomechanical loading of the lumbar spine. , 2019, Applied ergonomics.

[4]  Maury A. Nussbaum,et al.  A Follow-Up Study of the Effects of An Arm Support Exoskeleton on Physical Demands and Task Performance During Simulated Overhead Work , 2019, IISE Transactions on Occupational Ergonomics and Human Factors.

[5]  Marcia Kilchenman O'Malley,et al.  A robotic exoskeleton for rehabilitation and assessment of the upper limb following incomplete spinal cord injury , 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA).

[6]  Stefano Federici,et al.  The effectiveness of powered, active lower limb exoskeletons in neurorehabilitation: A systematic review. , 2015, NeuroRehabilitation.

[7]  Leon M Straker.  A review of research on techniques for lifting low-lying objects: 2. Evidence for a correct technique. , 2003, Work.

[8]  Ting Zhang,et al.  A Lower-Back Robotic Exoskeleton: Industrial Handling Augmentation Used to Provide Spinal Support , 2018, IEEE Robotics & Automation Magazine.

[9]  Yantao Yu,et al.  Wearable insole pressure system for automated detection and classification of awkward working postures in construction workers , 2018, Automation in Construction.

[10]  Homayoon Kazerooni,et al.  Lower Extremity Exoskeleton Reduces Back Forces in Lifting , 2009 .

[11]  O. Olatunji,et al.  Musculoskeletal disorders within the carpentry trade: analysis of timber flooring subtasks , 2020 .

[12]  Jawad Masood,et al.  Industrial Wearable Exoskeletons and Exosuits Assessment Process , 2018, Biosystems & Biorobotics.

[13]  Frank Krause,et al.  Exoskeletons for industrial application and their potential effects on physical work load , 2016, Ergonomics.

[14]  Divya Srinivasan,et al.  Potential of Exoskeleton Technologies to Enhance Safety, Health, and Performance in Construction: Industry Perspectives and Future Research Directions , 2019, IISE Transactions on Occupational Ergonomics and Human Factors.

[15]  Jun Qiu,et al.  Construction worker's awkward posture recognition through supervised motion tensor decomposition , 2017 .

[16]  H. Houdijk,et al.  The effect of a passive trunk exoskeleton on functional performance in healthy individuals. , 2018, Applied ergonomics.

[17]  Jennifer J. Richler,et al.  Effect size estimates: current use, calculations, and interpretation. , 2012, Journal of experimental psychology. General.

[18]  Yijian Zhang,et al.  A Review of exoskeleton-type systems and their key technologies , 2008 .

[19]  Maury A. Nussbaum,et al.  Usability evaluation of drywall sanding tools. , 2010 .

[20]  Minerva V. Pillai,et al.  Evaluation of Trunk-Supporting Exoskeleton , 2019, Proceedings of the Human Factors and Ergonomics Society Annual Meeting.

[21]  A Garg,et al.  Revised NIOSH equation for the design and evaluation of manual lifting tasks. , 1993, Ergonomics.

[22]  L Punnett,et al.  PATH: a work sampling-based approach to ergonomic job analysis for construction and other non-repetitive work. , 1996, Applied ergonomics.

[23]  Idsart Kingma,et al.  Effects of a passive exoskeleton on the mechanical loading of the low back in static holding tasks. , 2019, Journal of biomechanics.

[24]  M. de Looze,et al.  The effects of a passive exoskeleton on muscle activity, discomfort and endurance time in forward bending work. , 2016, Applied ergonomics.

[25]  Maury A. Nussbaum,et al.  Assessing the influence of a passive, upper extremity exoskeletal vest for tasks requiring arm elevation: Part II - "Unexpected" effects on shoulder motion, balance, and spine loading. , 2018, Applied ergonomics.

[26]  E. Heath.  Borg's Perceived Exertion and Pain Scales , 1998 .

[27]  Terry K Koo,et al.  A Guideline of Selecting and Reporting Intraclass Correlation Coefficients for Reliability Research. , 2016, Journal Chiropractic Medicine.

[28]  Darja Rugelj,et al.  The effect of load mass and its placement on postural sway. , 2011, Applied ergonomics.

[29]  Joan M Stevenson,et al.  PLAD (personal lift assistive device) stiffness affects the lumbar flexion/extension moment and the posterior chain EMG during symmetrical lifting tasks. , 2009, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[30]  Flexion-relaxation response to cyclic lumbar flexion. , 2004, Clinical biomechanics.

[31]  Maury A Nussbaum,et al.  Influences of different exoskeleton designs and tool mass on physical demands and performance in a simulated overhead drilling task. , 2019, Applied ergonomics.

[32]  Darwin G. Caldwell,et al.  A Powered Low-Back Exoskeleton for Industrial Handling: Considerations on Controls , 2017 .

[33]  Homayoon Kazerooni,et al.  Experimental Evaluation of a Shoulder-Support Exoskeleton for Overhead Work: Influences of Peak Torque Amplitude, Task, and Tool Mass , 2019, IISE Transactions on Occupational Ergonomics and Human Factors.

[34]  Maury A. Nussbaum,et al.  Effects of exoskeleton design and precision requirements on physical demands and quality in a simulated overhead drilling task. , 2019, Applied ergonomics.

[35]  N. Keijsers,et al.  A Framework for Measuring the Progress in Exoskeleton Skills in People with Complete Spinal Cord Injury , 2017, Front. Neurosci..

[36]  Tingfang Yan,et al.  Review of assistive strategies in powered lower-limb orthoses and exoskeletons , 2015, Robotics Auton. Syst..

[37]  Xueke Wang,et al.  Biomechanical evaluation of exoskeleton use on loading of the lumbar spine. , 2018, Applied ergonomics.

[38]  Kevin Desbrosses,et al.  Physiological consequences of using an upper limb exoskeleton during manual handling tasks. , 2018, Applied ergonomics.

[39]  Maury A. Nussbaum,et al.  Assessing the influence of a passive, upper extremity exoskeletal vest for tasks requiring arm elevation: Part I - "Expected" effects on discomfort, shoulder muscle activity, and work task performance. , 2018, Applied ergonomics.

[40]  Denys Denis,et al.  Relative importance of expertise, lifting height and weight lifted on posture and lumbar external loading during a transfer task in manual material handling , 2012, Ergonomics.

[41]  Rachelle Buchbinder,et al.  The global burden of low back pain: estimates from the Global Burden of Disease 2010 study , 2014, Annals of the rheumatic diseases.