Reconfiguration analysis of a 4-DOF 3-RER parallel manipulator with equilateral triangular base and moving platform *

Abstract This paper deals with the reconfiguration analysis of a 4-DOF (degrees-of-freedom) 3-RER parallel manipulator (PM) with equilateral triangular base and moving platform (ETBP), which is a special case of a 4-DOF PM in the literature. The 4-DOF 3-RER PM is composed of a base and a moving platform connected by three 3-RER legs, each of which is a serial kinematic chain composed of a revolute (R) joint, a planar (E) joint and an R joint in sequence. At first, a set of constraint equations of the 3-RER PM with ETBP is derived with the orientation of the moving platform represented using a Euler parameter quaternion (also Euler-Rodrigues quaternion) and then solved in closed form. It is found that the 3-RER PM with ETBP has three 4-DOF operation modes if both the base and moving platform are identical or two 4-DOF operation modes if the base and moving platform are not identical. The motion characteristics of the moving platform are obtained using the kinematic interpretation of Euler parameter quaternions with certain number of constant zero components, which was presented in a recent paper by the author of this paper. The transition configurations among different operation modes are also identified.

[1]  Pietro Fanghella,et al.  Parallel robots that change their group of motion , 2006, ARK.

[2]  J. M. Hervé.  Intrinsic formulation of problems of geometry and kinematics of mechanisms , 1982 .

[3]  Hieu Minh Trinh,et al.  Two-mode overconstrained three-DOFs rotational-translational linear-motor-based parallel-kinematics mechanism for machine tool applications , 2007, Robotica.

[4]  Manfred Husty,et al.  Kinematic Analysis of the 3-RPS Cube Parallel Manipulator , 2014 .

[5]  Jian S. Dai,et al.  Geometric Constraint and Mobility Variation of Two 3SvPSv Metamorphic Parallel Mechanisms , 2013 .

[6]  Xianwen Kong,et al.  Reconfiguration analysis of a 3-DOF parallel mechanism using Euler parameter quaternions and algebraic geometry method , 2014 .

[7]  Pierre-Luc Richard,et al.  Type Synthesis of Parallel Mechanisms With Multiple Operation Modes , 2006 .

[8]  Qinchuan Li,et al.  Theory of Parallel Mechanisms , 2012 .

[9]  Qinchuan Li,et al.  Parallel Mechanisms With Bifurcation of Schoenflies Motion , 2009, IEEE Transactions on Robotics.

[10]  K. Spring.  Euler parameters and the use of quaternion algebra in the manipulation of finite rotations: A review , 1986 .

[11]  Clément Gosselin,et al.  Type synthesis of 3T1R 4-DOF parallel manipulators based on screw theory , 2004, IEEE Transactions on Robotics and Automation.

[12]  W. F. Phillips,et al.  Review of attitude representations used for aircraft kinematics , 2001 .

[13]  Jian S. Dai,et al.  Constraint-Based Limb Synthesis and Mobility-Change-Aimed Mechanism Construction , 2011 .

[14]  M. Callegari,et al.  A new class of reconfigurable parallel kinematic machines , 2014 .

[15]  Massimo Callegari,et al.  Analysis of Kinematics and Reconfigurability of a Spherical Parallel Manipulator , 2014, IEEE Transactions on Robotics.

[16]  Qinchuan Li,et al.  Type synthesis of 4-DOF parallel manipulators , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[17]  Xianwen Kong,et al.  Type Synthesis of 3-DOF Multi-Mode Translational/Spherical Parallel Mechanisms with Lockable Joints , 2016 .

[18]  J. M. Selig.  Geometric Fundamentals of Robotics , 2004, Monographs in Computer Science.

[19]  Jian S. Dai,et al.  Advances in Reconfigurable Mechanisms and Robots II , 2012 .

[20]  Andrew J. Sommese,et al.  The numerical solution of systems of polynomials - arising in engineering and science , 2005 .

[21]  Fengfeng Xi,et al.  Reconfiguration Analysis of a Fully Reconfigurable Parallel Robot , 2013 .

[22]  David A. Cox,et al.  Ideals, Varieties, and Algorithms , 1997 .

[23]  Xin-Jun Liu,et al.  Type Synthesis of Parallel Mechanisms , 2014 .

[24]  Structure Synthesis of 4-DOF (3-Translation and 1-Rotation) Parallel Robot Mechanisms Based on the Units of Single-Opened-Chain , 2001, DAC 2001.

[25]  Grigore Gogu,et al.  Maximally Regular T2R1-Type Parallel Manipulators With Bifurcated Spatial Motion , 2011 .

[26]  Gerhard Pfister,et al.  A First Course in Computational Algebraic Geometry: A Problem in Group Theory Solved by Computer Algebra , 2013 .

[27]  Benjamin Pfaff,et al.  Geometric Design Of Linkages , 2016 .

[28]  Manfred L. Husty,et al.  Algebraic methods in mechanism analysis and synthesis , 2007, Robotica.

[29]  X. Kong.  Type Synthesis of 3-DOF Parallel Manipulators With Both a Planar Operation Mode and a Spatial Translational Operation Mode , 2013 .

[30]  Raffaele Di Gregorio,et al.  Motion planning for a novel reconfigurable parallel manipulator with lockable revolute joints , 2010, 2010 IEEE International Conference on Robotics and Automation.