Haptic interface transparency achieved through viscous coupling

Electromagnetic drives are subjected to an inherent inertia–torque tradeoff that fundamentally limits transparency: the higher the torque, the higher the inertia. We describe a dual-stage design that is not subjected to this tradeoff and that is able to approach perfect transparency for human users. It comprises a large, proximal motor and a small, distal motor to reproduce the transients. The two stages are coupled by a viscous clutch based on eddy currents that, without contact, accurately transforms slip velocity into torque. Such a system can, in general, be controlled to achieve a variety of objectives. Here, we show that an advanced, discrete-time, RST polynomial pole-placement controller can achieve near-perfect transparency. Experimental validation evaluated the human ability to detect small haptic details when using this drive and compared it with when using a conventional, single-motor interface.

[1]  Karl Johan Åström,et al.  Computer-Controlled Systems: Theory and Design , 1984 .

[2]  François Michaud,et al.  Differential elastic actuator for robotic interaction tasks , 2008, 2008 IEEE International Conference on Robotics and Automation.

[3]  Jonathan Padilla San Diego,et al.  Design and Development of a Haptic Dental Training System - hapTEL , 2010, EuroHaptics.

[4]  E. Godoy,et al.  RST-Controller Design for Sinewave References by Means of an Auxiliary Diophantine Equation , 2005, Proceedings of the 44th IEEE Conference on Decision and Control.

[5]  M. A. Heald.  Magnetic braking: Improved theory , 1988 .

[6]  野間 春生,et al.  Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems 参加報告 , 1997 .

[7]  Sohel Anwar,et al.  A parametric model of an eddy current electric machine for automotive braking applications , 2004, IEEE Transactions on Control Systems Technology.

[8]  Stefano Stramigioli,et al.  Variable spatial springs for robot control applications , 2001, Proceedings 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems. Expanding the Societal Role of Robotics in the the Next Millennium (Cat. No.01CH37180).

[9]  Vincent Hayward,et al.  Performance Measures for Haptic Interfaces , 1996 .

[10]  K. Perez.  Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment , 2014 .

[11]  Ioan D. Landu.  System identification and control design using P.I.M.+ software , 1990 .

[12]  John Kenneth Salisbury,et al.  In Pursuit of Dynamic Range: Using Parallel Coupled Actuators to Overcome Hardware Limitations , 1995, ISER.

[13]  Ralph L. Hollis,et al.  Lorentz Magnetic Levitation for Haptic Interaction: Device Design, Performance, and Integration with Physical Simulations , 2000, Int. J. Robotics Res..

[14]  Vincent Hayward,et al.  Passive Viscous Haptic Textures , 2008, 2008 Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems.

[15]  D. C. Quimby,et al.  High field strength wedged‐pole hybrid undulator , 1987 .

[16]  Gabriel Baud-Bovy,et al.  Hand-Held Object Force Direction Identification Thresholds at Rest and during Movement , 2010, EuroHaptics.

[17]  Peter Corke,et al.  Experimental Robotics VI, The Sixth International Symposium, Sydney, Australia, March 26-28, 1999 , 2000, ISER.

[18]  Vincent Hayward,et al.  The ultimate haptic device: First step , 2009, World Haptics 2009 - Third Joint EuroHaptics conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems.

[19]  Oussama Khatib,et al.  Reduced effective inertia in Macro-/mini-manipulator systems , 1991 .

[20]  Oussama Khatib,et al.  A Hybrid Actuation Approach for Haptic Devices , 2007, Second Joint EuroHaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems (WHC'07).

[21]  J. H. Wouterse.  Critical torque and speed of eddy current brake with widely separated soft iron poles , 1991 .

[22]  Neville Hogan,et al.  High bandwidth force regulation and inertia reduction using a macro/micro manipulator system , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[23]  Chee-Meng Chew,et al.  Series damper actuator: a novel force/torque control actuator , 2004, 4th IEEE/RAS International Conference on Humanoid Robots, 2004..

[24]  R.K. Srivastava,et al.  An Alternative Approach for Calculation of Braking Force of an Eddy-Current Brake , 2009, IEEE Transactions on Magnetics.

[25]  Matthew M. Williamson,et al.  Series elastic actuators , 1995, Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots.

[26]  Vincent Hayward,et al.  A New Compuatitional Model of Friction Applied to Haptic Rendering , 1999, ISER.

[27]  John Kenneth Salisbury,et al.  Large Workspace Haptic Devices - A New Actuation Approach , 2008, 2008 Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems.

[28]  Andre Sharon,et al.  Enhancement of Robot Accuracy using Endpoint Feedback and a Macro-Micro Manipulator System , 1984, 1984 American Control Conference.

[29]  Antonio Bicchi,et al.  Safety for Physical Human-Robot Interaction , 2008, Springer Handbook of Robotics.

[30]  S. Salcudean,et al.  On the control of redundant coarse-fine manipulators , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[31]  Ralph L. Hollis,et al.  A six-degree-of-freedom magnetically levitated variable compliance fine-motion wrist: design, modeling, and control , 1991, IEEE Trans. Robotics Autom..

[32]  William Harwin,et al.  A high bandwidth interface for haptic human computer interaction , 2001 .

[33]  V. Hayward,et al.  Design and analysis of a recoil-type vibrotactile transducer. , 2010, The Journal of the Acoustical Society of America.

[34]  Benoit Boulet,et al.  Modeling And Control Of A Robotic Joint With In-Parallel Redundant Actuators , 1992 .

[35]  Shigeki Sugano,et al.  Force Control Of The Robot Finger Joint Equipped With Mechanical Compliance Adjuster , 1992, Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems.

[36]  W. Joines,et al.  Air-gap reluctance and inductance calculations for magnetic circuits using a Schwarz-Christoffel transformation , 1995, Proceedings of PESC '95 - Power Electronics Specialist Conference.

[37]  John Kenneth Salisbury,et al.  A New Actuation Approach for Human Friendly Robot Design , 2004, Int. J. Robotics Res..

[38]  A. Gosline,et al.  Eddy Current Brakes for Haptic Interfaces: Design, Identification, and Control , 2008, IEEE/ASME Transactions on Mechatronics.

[39]  Donald Russell,et al.  Implementation of variable joint stiffness through antagonistic actuation using rolamite springs , 1999 .

[40]  Septimiu E. Salcudean,et al.  A coarse-fine approach to force-reflecting hand controller design , 1996, Proceedings of IEEE International Conference on Robotics and Automation.

[41]  Pascal Elleaume,et al.  Design considerations for a 1 Å SASE undulator , 2000 .

[42]  Vincent Hayward,et al.  Fundamental limits in the rendering of virtual haptic textures , 2005, First Joint Eurohaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems. World Haptics Conference.