A new methodology to analyze the functional and physical architecture of existing products for an assembly oriented product family identification
暂无分享,去创建一个
Jean-Yves Dantan | Ali Siadat | Alain Etienne | Paul Stief | J. Dantan | A. Siadat | P. Stief | A. Etienne
[1] Pennie Frow,et al. The customer value proposition: evolution, development, and application in marketing , 2017 .
[2] P. Michaleris,et al. Selection of powder or wire feedstock material for the laser cladding of Inconel® 625 , 2016 .
[3] Sam Anand,et al. Design for Manufacturability in Additive Manufacturing Using a Graph Based Approach , 2015 .
[4] D. Teece. Business Models, Business Strategy and Innovation , 2010 .
[5] Berliner Ring. The joint line balancing and material supply problem , 2015 .
[6] Dimitris Mourtzis,et al. Industrial Big Data as a Result of IoT Adoption in Manufacturing , 2016 .
[7] R. B. Woodruff,et al. Exploring the Phenomenon of Customers' Desired Value Change in a Business-to-Business Context , 2002 .
[8] Björn Niehaves,et al. Reconstructing the giant: On the importance of rigour in documenting the literature search process , 2009, ECIS.
[9] Robert J. Strong,et al. A review of melt extrusion additive manufacturing processes: I. Process design and modeling , 2014 .
[10] Selçuk Erkaya,et al. Investigation on effect of joint clearance on dynamics of four-bar mechanism , 2009 .
[11] Hanna Luotola,et al. The Value-based Sales Approach—Design Process, Tools and Needed Capabilities to Create a Solution , 2017 .
[12] Ray Y. Zhong,et al. A two-level advanced production planning and scheduling model for RFID-enabled ubiquitous manufacturing , 2015, Adv. Eng. Informatics.
[13] C. Carnall. Managing change in organizations , 1990 .
[14] I. Babuska,et al. Introduction to Finite Element Analysis: Formulation, Verification and Validation , 2011 .
[15] Andreas Hinterhuber. Value quantification capabilities in industrial markets , 2017 .
[16] Leenard Baas,et al. Expanding roles for the Swedish waste management sector in inter-organizational resource management , 2017 .
[17] Dirk Biermann,et al. Cutting edge preparation to improve drilling tools for HPC processes , 2008 .
[18] G. Byrne,et al. Observations on chip formation and acoustic emission in machining Ti–6Al–4V alloy , 2001 .
[19] Julie B. Zimmerman,et al. Green chemistry and green engineering in China: drivers, policies and barriers to innovation , 2012 .
[20] Neil Hopkinson,et al. Emerging Rapid Manufacturing Processes , 2006 .
[21] Enrico Filippi,et al. On the importance of the choice of the parameters of the Johnson-Cook constitutive model and their influence on the results of a Ti6Al4V orthogonal cutting model , 2017 .
[22] Hoda A. ElMaraghy,et al. Design of single assembly line for the delayed differentiation of product variants , 2010 .
[23] Hermann Seitz,et al. A review on 3D micro-additive manufacturing technologies , 2012, The International Journal of Advanced Manufacturing Technology.
[24] Erica R. H. Fuchs,et al. Metal additive manufacturing , 2017 .
[25] Robert Harrison,et al. Industrial Cloud-Based Cyber-Physical Systems: The IMC-AESOP Approach , 2014 .
[26] Carlos Eduardo Pereira,et al. Digital Twin Data Modeling with AutomationML and a Communication Methodology for Data Exchange , 2016 .
[27] Patrik Thollander,et al. Energy management in industry – a systematic review of previous findings and an integrative conceptual framework , 2016 .
[28] H.-P. Wiendahl,et al. Management and Control of Complexity in Manufacturing , 1994 .
[29] Reza Tavakkoli-Moghaddam,et al. An imperialist competitive algorithm for multi-objective U-type assembly line design , 2013, J. Comput. Sci..
[30] Joaquín B. Ordieres Meré,et al. Smart factories in Industry 4.0: A review of the concept and of energy management approached in production based on the Internet of Things paradigm , 2014, 2014 IEEE International Conference on Industrial Engineering and Engineering Management.
[31] Rainer Stark,et al. Innovations in digital modelling for next generation manufacturing system design , 2017 .
[32] Jorge Ambrósio,et al. Revolute joints with clearance in multibody systems , 2004 .
[33] Roman Dumitrescu,et al. Building blocks for planning and implementation of smart services based on existing products , 2018 .
[34] Joseph Sarkis,et al. Towards a national circular economy indicator system in China: an evaluation and critical analysis , 2012 .
[35] Mikael Hedlind,et al. Digital Twin of a Cutting Tool , 2018 .
[36] Tullio Tolio,et al. A Decomposition Method to Support the Configuration / Reconfiguration of Production Systems , 2005 .
[37] Dan Högberg,et al. The impact of information presentation on work environment and product quality : A case study , 2008 .
[38] Florentin Caloian,et al. Additive Manufacturing Flickering at the Beginning of Existence , 2012 .
[39] Thomas Ditlev Brunoe,et al. A participatory systems design methodology for changeable manufacturing systems , 2018, Int. J. Prod. Res..
[40] Peng Zhao,et al. A multi-criteria economic evaluation framework for control system configuration-framework and case study , 2009 .
[41] Lihui Wang,et al. Active collision avoidance for human–robot collaboration driven by vision sensors , 2017, Int. J. Comput. Integr. Manuf..
[42] Y. Geng,et al. Developing the circular economy in China: Challenges and opportunities for achieving 'leapfrog development' , 2008 .
[43] Hoejin Kim,et al. A review on quality control in additive manufacturing , 2018 .
[44] Stephan M. Liozu. State of value-based-pricing survey: Perceptions, challenges, and impact , 2017 .
[45] Zaoyang Guo,et al. Porosity Elimination in Modified Direct Laser Joining of Ti6Al4V and Thermoplastics Composites , 2019, Applied Sciences.
[46] Eeva Järvenpää,et al. Formal Information Model for Representing Production Resources , 2016, APMS.
[47] Alfred J. Nanni,et al. The New Performance Challenge: Measuring Operations for World-Class Competition , 1990 .
[48] Jan Gulliksen,et al. Key principles for user-centred systems design , 2003, Behav. Inf. Technol..
[49] G. R. Johnson,et al. A CONSTITUTIVE MODEL AND DATA FOR METALS SUBJECTED TO LARGE STRAINS, HIGH STRAIN RATES AND HIGH TEMPERATURES , 2018 .
[50] Michael Abramovici,et al. Reconfiguration of smart products during their use phase based on virtual product twins , 2017 .
[51] Lihui Wang,et al. IoT-enabled Smart Factory Visibility and Traceability Using Laser-scanners , 2017 .
[52] S. Grigorescu,et al. Dedicated Robot-Robot Cooperation , 2010 .
[53] W. Vermeulen,et al. The circular economy: New or Refurbished as CE 3.0? — Exploring Controversies in the Conceptualization of the Circular Economy through a Focus on History and Resource Value Retention Options , 2017, Resources, Conservation and Recycling.
[54] Klaus-Dieter Thoben,et al. Accessing servitisation potential of PLM data by applying the product avatar concept , 2015 .
[55] Stefan Ernst,et al. Scenario-based Simulation Approach for Layout Planning , 2013 .
[56] Fei Tao,et al. IoT-Based Intelligent Perception and Access of Manufacturing Resource Toward Cloud Manufacturing , 2014, IEEE Transactions on Industrial Informatics.
[57] Engelbert Westkämper,et al. Digital Manufacturing In The Global Era , 2007 .
[58] Jürgen Beyerer,et al. PPRS: Production skills and their relation to product, process, and resource , 2013, 2013 IEEE 18th Conference on Emerging Technologies & Factory Automation (ETFA).
[59] Yoshio Ichida,et al. Creep feed profile grinding of Ni-based superalloys with ultrafine-polycrystalline cBN abrasive grits , 2001 .
[60] Daria Battini,et al. The Integrated Assembly Line Balancing and Parts Feeding Problem with Ergonomics Considerations , 2016 .
[61] Seiji Katayama,et al. Laser direct joining of carbon fiber reinforced plastic to zinc-coated steel , 2013 .
[62] Zhicheng Zhang,et al. Precision grinding of silicon nitride ceramic with laser macro-structured diamond wheels , 2019, Optics & Laser Technology.
[63] Joshua M. Pearce,et al. Multi-material additive and subtractive prosumer digital fabrication with a free and open-source convertible delta RepRap 3-D printer , 2015 .
[64] Eric van Damme,et al. Non-Cooperative Games , 2000 .
[65] Berend Denkena,et al. Grinding with patterned grinding wheels , 2015 .
[66] Vera Denzer,et al. Dimensional Tolerances for Additive Manufacturing: Experimental Investigation for Fused Deposition Modeling , 2016 .
[67] Fagui Liu,et al. The Application of RFID Technology in Production Control in the Discrete Manufacturing Industry , 2006, 2006 IEEE International Conference on Video and Signal Based Surveillance.
[68] Haiyan Zhang,et al. Comparative analysis of socio-economic and environmental performances for Chinese EIPs: case studies in Baotou, Suzhou, and Shanghai , 2009 .
[69] Marco Ragazzi,et al. An interdisciplinary approach for introducing sustainable integrated solid waste management system in developing countries: the case of La Paz (Bolivia) , 2016 .
[70] Vasiliki Balioti,et al. Multi-Criteria Decision Making Using TOPSIS Method Under Fuzzy Environment. Application in Spillway Selection , 2018, Proceedings.
[71] M. Jong,et al. Getting depleted resource-based cities back on their feet again – the example of Yichun in China , 2016 .
[72] Hoda A. ElMaraghy,et al. Assembly systems layout design model for delayed products differentiation , 2010 .
[73] Mikael Hedlind,et al. The machine tool model-A core part of the digital factory , 2009 .
[74] Pedro Ferreira,et al. Multi-agent Architecture for Reconfiguration of Precision Modular Assembly Systems , 2010, IPAS.
[75] A. Flamos,et al. Implementation of Circular Economy Business Models by Small and Medium-Sized Enterprises (SMEs): Barriers and Enablers , 2016 .
[76] H. ElMaraghy,et al. Changeability – An Introduction , 2009 .
[77] P. Römkens,et al. Ashes from fluidized bed combustion of residual forest biomass: recycling to soil as a viable management option , 2017, Environmental Science and Pollution Research.
[78] B. Graf,et al. Laser Metal Deposition as Repair Technology for Stainless Steel and Titanium Alloys , 2012 .
[79] van Wouter Wezel,et al. The planning flexibility bottleneck in food processing industries , 2006 .
[80] Bengt Lennartson,et al. Height control of laser metal-wire deposition based on iterative learning control and 3D scanning , 2012 .
[81] Eeva Järvenpää,et al. Utilizing SPIN Rules to Infer the Parameters for Combined Capabilities of Aggregated Manufacturing Resources , 2018 .
[82] Duc Truong Pham,et al. Dynamic Modeling of Manufacturing Capability for Robotic Disassembly in Remanufacturing , 2017 .
[83] Sandro Wartzack,et al. Geometrical Variations Management 4.0: towards next Generation Geometry Assurance , 2018 .
[84] Yongli Wei,et al. Digital twin for CNC machine tool: modeling and using strategy , 2018, Journal of Ambient Intelligence and Humanized Computing.
[85] Stephan M. Liozu,et al. The conceptualization of value-based pricing in industrial firms , 2012 .
[86] Benjamin Haefner,et al. Function-Oriented Quality Control Strategies for High Precision Products , 2018 .
[87] László Monostori,et al. Design and management of reconfigurable assembly lines in the automotive industry , 2016 .
[88] John Ahmet Erkoyuncu,et al. Digital twins: Understanding the added value of integrated models for through-life engineering services , 2018 .
[89] Alessandra Caggiano,et al. Cloud Manufacturing Framework for Smart Monitoring of Machining , 2016 .
[90] Richard Leach,et al. Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing , 2016 .
[91] Michael Rethmeier,et al. Approach to assess a fast welding simulation in an industrial environment — Application for an automotive welded part , 2011 .
[92] Stefan Roth,et al. The conceptualization of pricing schemes: From product-centric to customer-centric value approaches , 2017 .
[93] Selling Solutions by Selling Value , 2018 .
[94] David W. Rosen,et al. Computer-Aided Design for Additive Manufacturing of Cellular Structures , 2007 .
[95] Berend Denkena,et al. Cutting edge preparation of PCBN inserts by means of grinding and its application in hard turning , 2013 .
[96] Bernd Breidenstein,et al. Cyber-Physical and Gentelligent Systems in Manufacturing and Life Cycle: Genetics and Intelligence – Keys to Industry 4.0 , 2017 .
[97] Jeffrey Too Chuan Tan,et al. Triple stereo vision system for safety monitoring of human-robot collaboration in cellular manufacturing , 2011, 2011 IEEE International Symposium on Assembly and Manufacturing (ISAM).
[98] Berend Denkena,et al. Cutting edge geometries , 2014 .
[99] Kristi Jackson,et al. Qualitative Data Analysis with NVivo , 2007 .
[100] Springer-Verlag London. Additive manufacturing process selection based on parts' selection criteria , 2015 .
[101] Carin Rösiö,et al. Towards a generic design method for reconfigurable manufacturing systems: Analysis and synthesis of current design methods and evaluation of supportive tools , 2017 .
[102] Dragos Axinte,et al. The allotropic transformation of polycrystalline cubic boron nitride structures resulting from the thermal effects of pulsed laser ablation , 2015 .
[103] Wilfried Sihn,et al. Digital Twin in manufacturing: A categorical literature review and classification , 2018 .
[104] Pekka Töytäri. Assessing value co-creation and value capture potential in services: a management framework , 2015 .
[105] Dichen Li,et al. The influence of standoff variations on the forming accuracy in laser direct metal deposition , 2011 .
[106] Siddhartha S. Srinivasa,et al. Game-Theoretic Modeling of Human Adaptation in Human-Robot Collaboration , 2017, 2017 12th ACM/IEEE International Conference on Human-Robot Interaction (HRI.
[107] B. Glaser. Constructivist Grounded Theory , 2002 .
[108] William E. Frazier,et al. Metal Additive Manufacturing: A Review , 2014, Journal of Materials Engineering and Performance.
[109] Peter Butala,et al. Virtual Manufacturing Work Systems , 2008 .
[110] Edward H. Glaessgen,et al. The Digital Twin Paradigm for Future NASA and U.S. Air Force Vehicles , 2012 .
[111] Ram D. Sriram,et al. A system for generating process and material selection advice during embodiment design of mechanical components , 2003 .
[112] Yılmaz Delice,et al. Stochastic two-sided U-type assembly line balancing: a genetic algorithm approach , 2016 .
[113] Stephen L. Vargo,et al. Evolving to a New Dominant Logic for Marketing , 2004 .
[114] Feng Wang,et al. Products that go round: exploring product life extension through design , 2014 .
[115] Alessandro De Luca,et al. Integrated control for pHRI: Collision avoidance, detection, reaction and collaboration , 2012, 2012 4th IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob).
[116] Waguih ElMaraghy,et al. Modeling of Manufacturing Process Complexity , 2006 .
[117] Hamideh Afsarmanesh,et al. A Framework for Management of Virtual Organization Breeding Environments , 2005, PRO-VE.
[118] Gudela Grote,et al. Management of Uncertainty: Theory and Application in the Design of Systems and Organizations , 2009 .
[119] Thomas Friedli,et al. Barriers to smart services for manufacturing companies – an exploratory study in the capital goods industry , 2018, The journal of business & industrial marketing.
[120] Paolo Rocco,et al. Kinetostatic danger field - a novel safety assessment for human-robot interaction , 2010, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems.
[121] M. El-Gallab,et al. Machining of Al/SiC particulate metal-matrix composites , 1998 .
[122] Arne Bilberg,et al. Adaptable and Reconfigurable LEAN Automation - a competitive solution in the western industry , 2012 .
[123] Alain Bernard,et al. Tools and techniques for product design , 2014 .
[124] Vijaysekhar Jayaraman,et al. MEMS tunable VCSEL light source for ultrahigh speed 60kHz - 1MHz axial scan rate and long range centimeter class OCT imaging , 2012, Photonics West - Biomedical Optics.
[125] G. Dijkema,et al. Understanding the Evolution of Industrial Symbiosis Research , 2014 .
[126] M. Johansson,et al. Value creation character and value assessment responsibility , 2017 .
[127] Reiner Anderl,et al. Industrie 4.0 - Advanced Engineering of Smart Products and Smart Production , 2014 .
[128] Tullio Tolio,et al. An energy consumption evaluation methodology for a manufacturing plant , 2015 .
[129] Fumihiko Kimura,et al. E-catalogue Library of Machines for Constructing Virtual Printed-circuit Assembly Lines , 2016 .
[130] G. Corder,et al. Barriers to Industrial Symbiosis: Insights from the Use of a Maturity Grid , 2015 .
[131] Matteo Saveriano,et al. Distance based dynamical system modulation for reactive avoidance of moving obstacles , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).
[132] Qiang Tian,et al. A comprehensive survey of the analytical, numerical and experimental methodologies for dynamics of multibody mechanical systems with clearance or imperfect joints , 2018 .
[133] Michael G. Banks. An extension of the Hirsch index: Indexing scientific topics and compounds , 2006, Scientometrics.
[134] Konstantinos Salonitis,et al. Lean Implementation Frameworks: The Challenges for SMEs , 2017 .
[135] Daria Battini,et al. Preventing ergonomic risks with integrated planning on assembly line balancing and parts feeding , 2017, Int. J. Prod. Res..
[136] Ray Y. Zhong,et al. Intelligent Manufacturing in the Context of Industry 4.0: A Review , 2017 .
[137] Andreas Eggert,et al. Value-Based Differentiation in Business Relationships: Gaining and Sustaining Key Supplier Status , 2006 .
[138] Johan Stahre,et al. Levels of automation in manufacturing , 2008 .
[139] Andreas Eggert,et al. Conceptualizing and communicating value in business markets: From value in exchange to value in use , 2018 .
[140] Thomas Ditlev Brunoe,et al. Prerequisites and Barriers for the Development of Reconfigurable Manufacturing Systems for High Speed Ramp-up☆ , 2016 .
[141] Joseph Sarkis,et al. Creating integrated business and environmental value within the context of China’s circular economy and ecological modernization , 2010 .
[142] Pierre Borne,et al. A study of scheduling problem in agro-food manufacturing systems , 2002, Math. Comput. Simul..
[143] Stephen L. Vargo,et al. The Service-dominant Logic of Marketing: Dialog, Debate, and Directions , 2006 .
[144] Pan Michaleris,et al. Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys , 2015 .
[145] Sotiris Makris,et al. Design Considerations for Safe Human-robot Collaborative Workplaces , 2015 .
[146] Ahmed Azab,et al. Change in Manufacturing – Research and Industrial Challenges , 2012 .
[147] L. F. Scavarda,et al. MANAGING COMPLEXITY IN AUTOMOTIVE PRODUCTION , 2007 .
[148] R. Schmitt,et al. OCT for Process Monitoring of Laser Transmission Welding : Inline tracking of weld seams enables monitoring and quality control of polymer welding processes , 2016 .
[149] Hans L Johannesson,et al. From Dedicated to Platform-Based Co-Development of Products and Manufacturing Systems , 2012 .
[150] Andi Smart,et al. Theory and practice in SME performance measurement systems , 2001 .
[151] Arnold Tukker,et al. Product services for a resource-efficient and circular economy - A review , 2015 .
[152] M. S. Andersen. An introductory note on the environmental economics of the circular economy , 2007 .
[153] W. Reinartz,et al. How to sell services more profitably. , 2008, Harvard business review.
[154] Michael Zwicky Hauschild,et al. Drivers and barriers for implementation of environmental strategies in manufacturing companies , 2013 .
[155] A. Heshmati,et al. A review of the circular economy in China : Moving from rhetoric to implementation , 2013 .
[156] Joona Keränen,et al. Customer value assessment in business markets , 2014 .
[157] F. Boons,et al. Toward a research agenda for policy intervention and facilitation to enhance industrial symbiosis based on a comprehensive literature review , 2014 .
[158] S. Parker,et al. A new model of work role performance: Positive behavior in uncertain and interdependent contexts , 2007 .
[159] R. E. Garrett,et al. Effect of Tolerance and Clearance in Linkage Design , 1969 .
[160] M. Bacharach. Two-person Cooperative Games , 1976 .
[161] Ahmet Çakir,et al. The handbook of human–machine interaction – a human centered design approach , 2011, Behav. Inf. Technol..
[162] Lorenzo Molinari Tosatti,et al. Dynamic safety in collaborative robot workspaces through a network of devices fulfilling functional safety requirements , 2014, ISR 2014.
[163] Jagdeep Singh,et al. Resource recovery from post-consumer waste : Important lessons for the upcoming circular economy , 2016 .
[164] Arthur C. Sanderson,et al. A correct and complete algorithm for the generation of mechanical assembly sequences , 1991, IEEE Trans. Robotics Autom..
[165] Osamu Horiuchi,et al. Development of an Ultraprecision Mother Machine , 2004 .
[166] Risto Rajala,et al. Value-based selling: An organizational capability perspective , 2015 .
[167] Samuel H. Huang,et al. Design for manufacture and design for `X`: concepts, applications, and perspectives , 2001 .
[168] Oussama Khatib,et al. A Depth Space Approach for Evaluating Distance to Objects , 2015, J. Intell. Robotic Syst..
[169] J. Paulo Davim. Progress in Lean Manufacturing , 2018 .
[170] Cesare Pautasso,et al. Restful web services vs. "big"' web services: making the right architectural decision , 2008, WWW.
[171] Dirk Biermann,et al. A study of grinding silicon nitride and cemented carbide materials with diamond grinding wheels , 2009, Prod. Eng..
[172] J. Tarascon,et al. Sustainability and in situ monitoring in battery development. , 2016, Nature materials.
[173] Eric Lutters,et al. Virtual dashboards in pilot production environments , 2019 .
[174] Tomohiko Sakao,et al. A value based evaluation method for Product/Service System using design information , 2012 .
[175] D. Bhattacharyya,et al. Machinability of a silicon carbide reinforced aluminium metal matrix composite , 1995 .
[176] Leo Alting,et al. Human Factors in the Management of Production , 2006 .
[177] John Ahmet Erkoyuncu,et al. Cost uncertainty management and modelling for industrial product-service systems , 2011 .
[178] Moe Thandar Wynn,et al. Current Research in Risk-aware Business Process Management - Overview, Comparison, and Gap Analysis , 2014, Commun. Assoc. Inf. Syst..
[179] Ann-Christine Falck,et al. Relationship between complexity in manual assembly work, ergonomics and assembly quality , 2012 .
[180] Benjamin Haefner,et al. Optimization of selective assembly and adaptive manufacturing by means of cyber-physical system based matching , 2015 .
[181] Kenneth Reifsnider,et al. Multiphysics Stimulated Simulation Digital Twin Methods for Fleet Management , 2013 .
[182] Eeva Järvenpää,et al. The development of an ontology for describing the capabilities of manufacturing resources , 2018, J. Intell. Manuf..
[183] D. B. Pedersen,et al. Biological features produced by additive manufacturing processes using vat photopolymerization method , 2017 .
[184] Richard J.M. Hague,et al. The cost of additive manufacturing: machine productivity, economies of scale and technology-push , 2016 .
[185] Shimon Y. Nof,et al. Springer Handbook of Automation , 2009, Handbook of Automation.
[186] Eckart Uhlmann,et al. Tool optimization for high speed grinding , 2013, Prod. Eng..
[187] Neil Hopkinson,et al. Rapid manufacturing : an industrial revolution for the digital age , 2006 .
[188] R. Day,et al. Tooling materials compatible with carbon fibre composites in a microwave environment , 2019, Composites Part B: Engineering.
[189] Nils Boysen,et al. Optimally locating in-house logistics areas to facilitate JIT-supply of mixed-model assembly lines , 2012 .
[190] Ali Siadat,et al. Integrated product-process design to suggest appropriate manufacturing technology: a review , 2017 .
[191] Ravi Vaidyanathan,et al. IEEE International Conference on Intelligent Robots and Systems , 2011, IROS 2011.
[192] Denys Plakhotnik,et al. Chip geometry and cutting forces in gear shaping , 2016 .
[193] K.K.B. Hon,et al. Performance and Evaluation of Manufacturing Systems , 2005 .
[194] Marek Balazinski,et al. Flank Wear Progression During Machining Metal Matrix Composites , 2006 .
[195] Andrew J. Pinkerton,et al. The significance of deposition point standoff variations in multiple-layer coaxial laser cladding (coaxial cladding standoff effects) , 2004 .
[196] R. Day,et al. Comparison of the mechanical and physical properties of a carbon fibre epoxy composite manufactured by resin transfer moulding using conventional and microwave heating , 2008 .
[197] K. T. Ramesh,et al. The Mechanical Response of an A359/SiCp MMC and the A359 Aluminum Matrix to Dynamic Shearing Deformations , 2004 .
[198] T S Baines,et al. State-of-the-art in product-service systems , 2007 .
[199] Mohammad Rabiey,et al. Dry grinding with CBN wheels, the effect of structuring , 2011 .
[200] Hakki Ozgur Unver,et al. A framework for energy reduction in manufacturing process chains (E-MPC) and a case study from the Turkish household appliance industry , 2016 .
[201] Ajay P. Malshe,et al. Ultrashort pulsed laser ablation of diamond , 1998 .
[202] Diann Reischman,et al. The Magical Number 7 , 2011 .
[203] Tullio Tolio,et al. Robust production control against propagation of disruptions , 2011 .
[204] Larry L. Howell,et al. Modeling the Effects of Joint Clearances in Planar Micromechanisms , 2000 .
[205] Alessandro De Luca,et al. Sensorless Robot Collision Detection and Hybrid Force/Motion Control , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.
[206] Renzo Akkerman,et al. Analyzing scheduling in the food-processing industry: structure and tasks , 2009, Cognition, Technology & Work.
[207] Jens Rasmussen,et al. Skills, rules, and knowledge; signals, signs, and symbols, and other distinctions in human performance models , 1983, IEEE Transactions on Systems, Man, and Cybernetics.
[208] E. Hollnagel. Cognitive ergonomics: it's all in the mind , 1997 .
[209] A. Azapagic,et al. Integrating Backcasting and Eco‐Design for the Circular Economy: The BECE Framework , 2017 .
[210] Roque Moraes,et al. Analise de conteudo , 1999 .
[211] Hasse Nylund,et al. Digital Virtual Holons — An Approach to Digital Manufacturing Systems , 2008 .
[212] Clay Sprawls,et al. The virtual corporation , 1993 .
[213] Saurabh Gupta,et al. Product family-based assembly sequence design methodology , 1998 .
[214] Paulo A. Cauchick Miguel,et al. Additive manufacturing process selection based on parts’ selection criteria , 2015, The International Journal of Advanced Manufacturing Technology.
[215] Carin Rösiö,et al. Reconfigurable production system design – theoretical and practical challenges , 2013 .
[216] Jurgen Lange,et al. OPC : From Data Access to Unified Architecture , 2010 .
[217] Ruikang K. Wang,et al. 4D optical coherence tomography-based micro-angiography achieved by 1.6-MHz FDML swept source. , 2015, Optics letters.
[218] Carlos Morato,et al. Toward Safe Human Robot Collaboration by Using Multiple Kinects Based Real-Time Human Tracking , 2014, J. Comput. Inf. Sci. Eng..
[219] Malin Karlsson,et al. HOW CHANGES IN COGNITIVE AUTOMATION CAN AFFECT OPERATOR PERFORMANCE AND PRODUCTIVITY , 2014 .
[220] Ahmed Azab,et al. Modelling evolution in manufacturing: A biological analogy , 2008 .
[221] J. Stahrea,et al. Interaction between complexity , quality and cognitive automation , 2013 .
[222] Andrew D.F. Price,et al. A strategic framework for change management , 2006 .
[223] Alessandra Caggiano,et al. Sustainability Enhancement of a Turbine Vane Manufacturing Cell through Digital Simulation-Based Design , 2016 .
[224] J. Bi,et al. The Circular Economy: A New Development Strategy in China , 2006 .
[225] Åsa Fast-Berglund,et al. Evaluation of Guidelines for Assembly Instructions , 2016 .
[226] Kristo Karjust,et al. Implementation of Key Performance Indicators Selection Model as Part of the Enterprise Analysis Model , 2017 .
[227] Bilal Ahmad,et al. An innovative energy predictive process planning tool for assembly automation systems , 2015, IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society.
[228] K. Lai,et al. Barriers to Promoting Eco‐Industrial Parks Development in China , 2015 .
[229] Robert W. Palmatier,et al. Relational selling: Past, present and future , 2017 .
[230] Soonhung Han,et al. Construction of a computer-simulated mixed reality environment for virtual factory layout planning , 2011, Comput. Ind..
[231] S. Ulgiati,et al. A review on circular economy: the expected transition to a balanced interplay of environmental and economic systems , 2016 .
[232] Tsuyoshi Fujita,et al. Environmental and economic gains of industrial symbiosis for Chinese iron/steel industry: Kawasaki's experience and practice in Liuzhou and Jinan , 2013 .
[233] Harald Meerkamm,et al. Tolerance Analysis of Mechanisms Taking into Account Joints with Clearance and Elastic Deformations , 2009 .
[234] Michal Šimon,et al. Comparison of digital tools for ergonomics in practice , 2015 .
[235] Oussama Khatib,et al. Real-Time Obstacle Avoidance for Manipulators and Mobile Robots , 1985, Autonomous Robot Vehicles.
[236] Uwe G. Schulte. New business models for a radical change in resource efficiency , 2013 .
[237] Petri Parvinen,et al. Bridging the theory to application gap in value‐based selling , 2011 .
[238] David W. Rosen,et al. Build Time and Cost Models for Additive Manufacturing Process Selection , 2012 .
[239] Bernd Noche,et al. In-plant milk run decision problems , 2014, 2014 International Conference on Logistics Operations Management.
[240] Christoph Walter,et al. Safeguarding and Supporting Future Human-robot Cooperative Manufacturing Processes by a Projection- and Camera-based Technology , 2017 .
[241] Silvia Silva da Costa Botelho,et al. A Multi-Cave Visualization System for Digital Manufacturing , 2009 .
[242] R. Rajala,et al. Organizational and institutional barriers to value-based pricing in industrial relationships , 2015 .
[243] Sandro Wartzack,et al. Robust-Design-Optimization of mechanisms based on kinematic requirements considering uncertainties , 2018 .
[244] Günther Schuh,et al. Design for Changeability , 2009 .
[245] Jeremy A. Marvel,et al. Performance Metrics of Speed and Separation Monitoring in Shared Workspaces , 2013, IEEE Transactions on Automation Science and Engineering.
[246] Johan Stahre,et al. MANAGING PRODUCTION COMPLEXITY BY SUPPORTING COGNITIVE PROCESSES IN FINAL ASSEMBLY , 2014 .
[247] Federico Adrodegari,et al. Towards Service 4.0: a new framework and research priorities , 2018 .
[248] Thomas Ditlev Brunoe,et al. Critical enablers of changeable and reconfigurable manufacturing and their industrial implementation , 2018 .
[249] Paolo Rocco,et al. Towards safe human-robot interaction in robotic cells: An approach based on visual tracking and intention estimation , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.
[250] Yaxuan Liu,et al. Investigating public awareness on circular economy in western China: A case of Urumqi Midong , 2017 .
[251] S. B.,et al. An Introduction to the Mathematical Theory of the Conduction of Heat in Solids , 1924, Nature.
[252] Tom Cassidy,et al. The Design of Product Instructions , 2013 .
[253] Joona Keränen,et al. Towards a framework of customer value assessment in B2B markets: An exploratory study , 2013 .
[254] John Ahmet Erkoyuncu,et al. Identifying uncertainties for industrial service delivery: a systems approach , 2013 .
[255] J. Erkoyuncu,et al. Identifying information asymmetry challenges in the defence sector , 2018 .
[256] P. Arrazola,et al. Machinability of titanium alloys (Ti6Al4V and Ti555.3) , 2009 .
[257] R. Mirshams,et al. Study of Knowledge-Based System ( KBS ) and Decision Making Methodologies in Materials Selection for Lightweight Aircraft Metallic Structures , 2017 .
[258] E. Westkämper,et al. Continuous Improvement and Participative Factory Planning by Computer Systems , 2001 .
[259] C. Decker,et al. Photoinitiated crosslinking polymerisation , 1996 .
[260] Joseph Butterfield,et al. Integrated Digital Design for Manufacture for Reduced Life Cycle Cost , 2006 .
[261] László Monostori,et al. ScienceDirect Variety Management in Manufacturing . Proceedings of the 47 th CIRP Conference on Manufacturing Systems Cyber-physical production systems : Roots , expectations and R & D challenges , 2014 .
[262] T.H.C. Childs,et al. Ti6Al4V metal cutting chip formation experiments and modelling over a wide range of cutting speeds , 2018 .
[263] Marco Taisch,et al. Energy management in production: A novel method to develop key performance indicators for improving energy efficiency , 2015 .
[264] Jessica Bruch,et al. Exploring the design process of reconfigurable industrial production systems: Activities, challenges, and tactics , 2018 .
[265] Niko Siltala,et al. Formal resource and capability descriptions supporting rapid reconfiguration of assembly systems , 2016, 2016 IEEE International Symposium on Assembly and Manufacturing (ISAM).
[266] Alex Norta,et al. Collaborative Project Management Framework for Partner Network Initiation , 2015 .
[267] Robert X. Gao,et al. Cloud-enabled prognosis for manufacturing , 2015 .
[268] Natalia Kliewer,et al. Value Based Pricing meets Data Science : A Concept for Automated Spare Part Valuation , 2018 .
[269] Aitor Olarra,et al. Machine tools for large parts , 2013 .
[270] Detlef Zühlke,et al. SmartFactory - Towards a factory-of-things , 2010, Annu. Rev. Control..
[271] Chang Ho Lee,et al. Simulation framework for the verification of PLC programs in automobile industries , 2011 .
[272] Marek Balazinski,et al. An Energy Based Analytical Force Model for Orthogonal Cutting of Metal Matrix Composites , 2004 .
[273] James C. Anderson,et al. Why the highest price isn't the best price , 2010 .
[274] Mirja Meyer,et al. Redundancy Investments in Manufacturing Systems - The role of redundancies for manufacturing system robustness , 2016 .
[275] Damien Trentesaux,et al. Reactive and energy-aware scheduling of flexible manufacturing systems using potential fields , 2014, Comput. Ind..
[276] Byung Man Kwak,et al. Optimal Stochastic Design of Four-Bar Mechanisms for Tolerance and Clearance , 1988 .
[277] Mike Gregory. Analysis of manufacturing systems , 1992 .
[278] Konstantinos Efthymiou,et al. Evaluating manufacturing systems robustness: an aerospace case study , 2018 .
[279] M. Porter,et al. How Smart, Connected Products Are Transforming Competition , 2014 .
[280] U. Bracht,et al. The Digital Factory between vision and reality , 2005, Comput. Ind..
[281] Lin Li,et al. Finite element modelling of substrate thermal distortion in direct laser additive manufacture of an aero-engine component , 2013 .
[282] Michael W. Grieves,et al. Digital Twin: Mitigating Unpredictable, Undesirable Emergent Behavior in Complex Systems , 2017 .
[283] Peter Nyhuis,et al. Technical inheritance: Information basis for the identification and development of product generations , 2017 .
[284] Gert Zülch,et al. Modelling of occupational health and safety aspects in the Digital Factory , 2005, Comput. Ind..
[285] Huseyin Selcuk Kilic,et al. Advances in assembly line parts feeding policies: a literature review , 2015 .
[286] Fritz Klocke,et al. Broaching of Inconel 718 with cemented carbide , 2013, Prod. Eng..
[287] Xiaojiang Yu. Coal mining and environmental development in southwest China , 2017 .
[288] Paul G. Maropoulos,et al. Digital enterprise technology--defining perspectives and research priorities , 2003, Int. J. Comput. Integr. Manuf..
[289] R. H. Wentorf. Cubic Form of Boron Nitride , 1957 .
[290] Juan Sebastian Cuellar,et al. Additive manufacturing of non-assembly mechanisms , 2018 .
[291] Stefan Goetz,et al. Optimization of Build Time and Support Material Quantity for the Additive Manufacturing of Non-Assembly Mechanisms , 2019 .
[292] Luigi Pelliccia,et al. Energy Visualization Techniques for Machine Tools in Virtual Reality , 2016 .
[293] James F. Bredt,et al. Digital manufacturing , 2000, SPIE Optics + Photonics.
[294] Sue J. Waite,et al. Real world research: a resource for users of social research methods in applied settings (3rd ed.) , 2012 .
[295] Wei Chen,et al. A Variation Analysis Method for Linkage Mechanism with Consideration of Joint Clearance and Deformation , 2018 .
[296] Craig A. Smith,et al. Appraisal as a pervasive determinant of anger. , 2004, Emotion.
[297] Michael Rosemann,et al. Factors and measures of business process modelling: model building through a multiple case study , 2005, Eur. J. Inf. Syst..
[298] B. Denkena,et al. Laser preparation of cBN inserts and its effect on tool surface integrity and tool life , 2015 .
[299] Konstantinos Salonitis,et al. Drivers and Barriers of Lean Implementation in the Greek Manufacturing Sector , 2016 .
[300] Beth Rogers,et al. CABS: a conceptual model for context-aware B2B sales applications , 2016 .
[301] Juhani Heilala,et al. Modular reconfigurable flexible final assembly systems , 2001 .
[302] Mudhafar Alefari,et al. The role of leadership in implementing lean manufacturing , 2017 .
[303] J. C. Jaeger. Moving sources of heat and the temperature at sliding contacts , 1943, Journal and proceedings of the Royal Society of New South Wales.
[304] Henry Mintzberg. Patterns in Strategy Formation , 1978, International Studies of Management & Organization.
[305] Renato A. Krohling,et al. Information Technology and Quantitative Management ( ITQM 2015 ) A-TOPSIS – An approach Based on TOPSIS for Ranking Evolutionary Algorithms , 2015 .
[306] Yoram Koren,et al. Product variety and manufacturing complexity in assembly systems and supply chains , 2008 .
[307] Paul Mativenga,et al. Assessment of tool rake surface structure geometry for enhanced contact phenomena , 2013 .
[308] Ryuta Sato,et al. Cutting Force and Finish Surface Simulation of End Milling Operation in Consideration of Static Tool Deflection by Using Voxel Model , 2018 .
[309] Dmitry Berenson,et al. Human-robot collaborative manipulation planning using early prediction of human motion , 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems.
[310] Fiona Charnley,et al. Skills and capabilities for a sustainable and circular economy: The changing role of design , 2017 .
[311] Andrew Y. C. Nee,et al. Digital twin driven prognostics and health management for complex equipment , 2018 .
[312] Mica R. Endsley,et al. Theoretical Underpinnings of Situation Awareness, A Critical Review , 2000 .
[313] Zbigniew J. Pasek,et al. RMS design methodology for automotive framing systems BIW , 2013 .
[314] Benjamin Haefner,et al. Function-oriented measurements and uncertainty evaluation of micro-gears for lifetime prognosis , 2017 .
[315] E. Westkämper,et al. Factory Transformability: Adapting the Structures of Manufacturing , 2006 .
[316] M. Ormazábal,et al. Towards a consensus on the circular economy , 2017 .
[317] Thomas L. Saaty,et al. The Analytic Hierarchy and Analytic Network Processes for the Measurement of Intangible Criteria and for Decision-Making , 2016 .
[318] Oussama Khatib,et al. A depth space approach to human-robot collision avoidance , 2012, 2012 IEEE International Conference on Robotics and Automation.
[319] Pedro J. Arrazola,et al. Mechanical characterization and modelling of Inconel 718 material behavior for machining process assessment , 2017 .
[320] In Lee,et al. The Internet of Things (IoT): Applications, investments, and challenges for enterprises , 2015 .
[321] Line Harder Clemmensen,et al. Characterizing Digital Light Processing (DLP) 3D Printed Primitives , 2015, SCIA.
[322] Lihui Wang,et al. Current status of reconfigurable assembly systems , 2007, Int. J. Manuf. Res..
[323] Dirk Biermann,et al. The effect of tool vibrations on the flank surface created by peripheral milling , 2008 .
[324] S. Funtowicz,et al. Combining Quantitative and Qualitative Measures of Uncertainty in Model‐Based Environmental Assessment: The NUSAP System , 2005, Risk analysis : an official publication of the Society for Risk Analysis.
[325] P. Hofmann. The human side of automation. , 1984, Topics in hospital pharmacy management.
[326] Daniel R. Cooper,et al. The Environmental Impacts of Reuse: A Review , 2017 .
[327] S S Stevens,et al. HUMAN ENGINEERING FOR AN EFFECTIVE AIR-NAVIGATION AND TRAFFIC-CONTROL SYSTEM, AND APPENDIXES 1 THRU 3 , 1951 .
[328] Albert Weckenmann,et al. Acceptance of processes: do we need decision rules? , 2000 .
[329] Berend Denkena,et al. Affecting the Life Time of Roller Bearings by an Optimal Surface Integrity Design after Hard Turning and Deep Rolling , 2014 .
[330] E. Brinksmeier,et al. Friction, Cooling and Lubrication in Grinding , 1999 .
[331] Johan Stahre,et al. A classification of carrier and content of information , 2012 .
[332] Vera Hummel,et al. Capability-based Task Allocation in Human-robot Collaboration , 2017 .
[333] Yusuf Altintas,et al. Mechanics and dynamics of general milling cutters.: Part II: inserted cutters , 2001 .
[334] F. Martina,et al. Design for Additive Manufacturing , 2019 .
[335] W. Kuehn. DIGITAL FACTORY – INTEGRATION OF SIMULATION ENHANCING THE PRODUCT AND PRODUCTION PROCESS TOWARDS OPERATIVE CONTROL AND OPTIMISATION , 2006 .
[336] Oliver Straeter,et al. Assessing the Complex Interaction and Variations in Human Performance Using Nonmetrical Scaling Methods , 2015 .
[337] Michel Coret,et al. Calibration of the insert/tool holder thermal contact resistance in stationary 3D turning , 2013 .
[338] Konstantinos Salonitis,et al. Redesign optimization for manufacturing using additive layer techniques , 2015 .
[339] Angappa Gunasekaran,et al. IoT powered servitization of manufacturing – an exploratory case study , 2017 .
[340] Constantinos Mavroidis,et al. Fabrication of Non-Assembly Mechanisms and Robotic Systems Using Rapid Prototyping , 2001 .
[341] Stjepandić,et al. Internet of Things for Manufacturing in the Context of Industry 4.0 , 2017, TE.
[342] Daniel A. Silverman,et al. Facilitating organizational change , 1996 .
[343] Américo Azevedo,et al. Factory Templates for Digital Factories Framework , 2011 .
[344] O. Çakır,et al. Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC , 2008 .
[345] Thomas J. Farmer,et al. Bio-derived materials as a green route for precious & critical metal recovery and re-use , 2015 .
[346] R. F. Recht,et al. A Dynamic Analysis of High-Speed Machining , 1985 .
[347] Christopher Saldana,et al. Realization of the 5-Axis Machine Tool Digital Twin Using Direct Servo Control from CAM , 2018 .
[348] Renzo Akkerman,et al. Make to stock and mix to order: choosing intermediate products in the food-processing industry , 2010 .
[349] Jingzheng Ren,et al. A planning model for the chemical integrated system under uncertainty by grey programming approach , 2013 .
[350] G. Lay,et al. Service-based business concepts: A typology for business-to-business markets , 2009 .
[351] Giovanni Moroni,et al. Towards Early Estimation of Part Accuracy in Additive Manufacturing , 2014 .
[352] Toshiyuki Enomoto,et al. Improving anti-adhesive properties of cutting tool surfaces by nano-/micro-textures , 2010 .
[353] Luis M. Camarinha-Matos,et al. Virtual enterprise formation in the context of a sustainable partner network , 2017, Ind. Manag. Data Syst..
[354] Lijun Song,et al. Control of melt pool temperature and deposition height during direct metal deposition process , 2012 .
[355] Pan Michaleris,et al. Effect of stress relaxation on distortion in additive manufacturing process modeling , 2016 .
[356] Hamid Lesani,et al. A Complex Adaptive System of Systems Approach to Human–Automation Interaction in Smart Grid , 2015 .
[357] André Crosnier,et al. Multimodal control for human-robot cooperation , 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems.
[358] George Chryssolouris,et al. Assembly system design and operations for product variety , 2011 .
[359] Makoto Itoh,et al. A theoretical framework for designing human-centered automotive automation systems , 2018, Cognition, Technology & Work.
[360] Jean-Yves Dantan,et al. Reconfigurable machining process planning for part variety in new manufacturing paradigms: Definitions, models and framework , 2018, Comput. Ind. Eng..
[361] Volker Wittstock,et al. Mobile Augmented Reality Based Monitoring of Assembly Lines , 2014 .
[362] Alla Sheffer,et al. Elements of style , 2015, ACM Trans. Graph..
[363] Soundar R. T. Kumara,et al. Cyber-physical systems in manufacturing , 2016 .
[364] Magnus Johansson,et al. Pricing strategies and pricing capabilities , 2012 .
[365] Bengt Lennartson,et al. Energy Reduction in a Pallet-Constrained Flow Shop Through On–Off Control of Idle Machines , 2013, IEEE Transactions on Automation Science and Engineering.
[366] Ulrich Jessen,et al. Classifications and conventions structure the handling of models within the Digital Factory , 2005, Comput. Ind..
[367] Julia Balogun,et al. Exploring Strategic Change , 1998 .
[368] Kazuhiko Kawamura,et al. Multi-Robot Systems: From Swarms to Intelligent Automata , 2002 .
[369] S. Wartzack,et al. Erarbeitung von Gestaltungsrichtlinien für die Konstruktion additiv gefertigter Mechanismen , 2019 .
[370] Jorge J. Moré,et al. User Guide for Minpack-1 , 1980 .
[371] S. Schwab,et al. Sensor system for monitoring impregnation and cure during resin transfer molding , 1996 .
[372] Mirko Ficko,et al. Multi-criteria selection of manufacturing processes in the conceptual process planning , 2017 .
[373] F. O. Rasch,et al. Machinability of Particulate Aluminium Matrix Composites , 1992 .
[374] George Chryssolouris,et al. Manufacturing systems complexity analysis methods review , 2016, Int. J. Comput. Integr. Manuf..
[375] Chris Rodgers,et al. Complexity and Organizational Reality: Uncertainty and the Need to Rethink Management after the Collapse of Investment Capitalism , 2009 .
[376] Paolo Tecchio,et al. In search of standards to support circularity in product policies: A systematic approach , 2017, Journal of cleaner production.
[377] Yusuf Altintas,et al. Integration of virtual and on-line machining process control and monitoring , 2017 .
[378] Sebastian Thiede,et al. Energy Efficiency in Manufacturing Systems , 2012 .
[379] Stephen Malkin,et al. Grinding Mechanisms for Ceramics , 1996 .
[380] Berend Denkena,et al. Virtual process systems for part machining operations , 2014 .
[381] József Váncza,et al. A Robust Scheduling Approach for a Single Machine to Optimize a Risk Measure , 2014 .
[382] Rainer Drath,et al. Industrie 4.0: Hit or Hype? [Industry Forum] , 2014, IEEE Industrial Electronics Magazine.
[383] J. Moon,et al. Establishment of the framework to visualize the space dose rates on the dismantling simulation system based on a digital manufacturing platform , 2016 .
[384] Federica Cucchiella,et al. Recycling of WEEEs: An economic assessment of present and future e-waste streams , 2015 .
[385] Berend Denkena,et al. Self-optimizing tool path generation for 5-axis machining processes , 2019, CIRP Journal of Manufacturing Science and Technology.
[386] Chris A. McMahon,et al. Uncertainty in Through-Life Costing–-Review and Perspectives , 2010, IEEE Transactions on Engineering Management.
[387] L. Tang,et al. Layer-to-Layer Height Control for Laser Metal Deposition Process , 2011 .
[388] John Ahmet Erkoyuncu,et al. Uncertainty driven service cost estimation for decision support at the bidding stage , 2013 .
[389] Thomas L. DeFazio,et al. Simplified generation of all mechanical assembly sequences , 1987, IEEE Journal on Robotics and Automation.
[390] Michael D. Abràmoff,et al. Image processing with ImageJ , 2004 .
[391] Andrew S. Tanenbaum,et al. The evolution of RFID security , 2006, IEEE Pervasive Computing.
[392] Dirk Euhus,et al. Visualization of Simulated and Measured Process Data , 2019 .
[393] Åsa Fast-Berglund,et al. Relations between complexity, quality and cognitive automation in mixed-model assembly , 2013 .
[394] Ray Y. Zhong,et al. E-commerce logistics in supply chain management: Implementations and future perspective in furniture industry , 2017, Ind. Manag. Data Syst..
[395] Warren P. Seering,et al. Function sharing in mechanical design , 1990 .
[396] Jyh-Cheng Yu,et al. The structure representation for the concurrent analysis of product assembly and disassembly , 2005, CSCWD.
[397] Wolfgang Ulaga,et al. ‘It's almost like taking the sales out of selling’—Towards a conceptualization of value-based selling in business markets , 2012 .
[398] Matteo Saveriano,et al. Point cloud based dynamical system modulation for reactive avoidance of convex and concave obstacles , 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems.
[399] Gerd Heber,et al. On the Effects of Modeling As-Manufactured Geometry: Toward Digital Twin , 2014 .
[400] Hermes Giberti,et al. Kinematic synthesis of a new 3D printing solution , 2016 .
[401] J. C. Albiñana,et al. A framework for concurrent material and process selection during conceptual product design stages , 2012 .
[402] Daniel E. Whitney,et al. The role of key characteristics in the design of mechanical assemblies , 2006 .
[403] Jörg Franke,et al. Methods-Energy Measurement – An approach for sustainable energy planning of manufacturing technologies , 2016 .
[404] Lihui Wang,et al. Current status and advancement of cyber-physical systems in manufacturing , 2015 .
[405] Christopher D. Provines. Value-based pricing meets twenty-first century procurement , 2017 .
[406] M. D. Monzón,et al. Standardization in additive manufacturing: activities carried out by international organizations and projects , 2015 .
[407] Christopher D. Wickens,et al. A model for types and levels of human interaction with automation , 2000, IEEE Trans. Syst. Man Cybern. Part A.
[408] Ashutosh Tiwari,et al. Discrete Event Simulation and Virtual Reality Use in Industry: New Opportunities and Future Trends , 2016, IEEE Transactions on Human-Machine Systems.
[409] D. E. Whitney,et al. Systematic evaluation of constraint properties of datum flow chain , 2001, Proceedings of the 2001 IEEE International Symposium on Assembly and Task Planning (ISATP2001). Assembly and Disassembly in the Twenty-first Century. (Cat. No.01TH8560).
[410] Sandro Wartzack,et al. Challenges and Potentials of Digital Twins and Industry 4.0 in Product Design and Production for High Performance Products , 2019, Procedia CIRP.
[411] Elita Amrina,et al. Key performance indicators for sustainable manufacturing evaluation in automotive companies , 2011, 2011 IEEE International Conference on Industrial Engineering and Engineering Management.
[412] Dragos Axinte,et al. Textured grinding wheels: A review , 2016 .
[413] Ralf Reichwald,et al. Revenue models for integrated customer solutions: Concept and organizational implementation , 2010 .
[414] Afan Sun,et al. The Establishment of the Green Tax Policy in China – To Accelerate the Construction of Circular Economy Experimental Zone in Qaidam Basin of Qinghai Province as an Example , 2013 .
[415] K. Tahara,et al. Data Quality Assessment of the Uncertainty Analysis Applied to the Greenhouse Gas Emissions of a Dairy Cow System , 2017 .
[416] Christian Brecher,et al. Estimation of the virtual workpiece quality by the use of a spindle-integrated process force measurement , 2019, CIRP Annals.
[417] Sotiris Makris,et al. Virtual Commissioning of an Assembly Cell with Cooperating Robots , 2012, Adv. Decis. Sci..
[418] Lenz Belzner,et al. A Simulation-Based Architecture for Smart Cyber-Physical Systems , 2016, 2016 IEEE International Conference on Autonomic Computing (ICAC).
[419] Arnd Meyer,et al. VR tools for the development of energy-efficient products , 2011 .
[420] Igor Drstvenšek,et al. Speed and accuracy evaluation of additive manufacturing machines , 2011 .
[421] Berend Denkena,et al. On the honed cutting edge and its side effects during orthogonal turning operations of AISI1045 with coated WC-Co inserts , 2012 .
[422] M. C. Shaw,et al. Chip Formation in the Machining of Hardened Steel , 1993 .
[423] Thomas Hedberg,et al. Interoperability: linking design and tolerancing with metrology , 2016, Procedia CIRP.
[424] Carmen Ruiz-Puente,et al. Development of the Tool SymbioSyS to Support the Transition Towards a Circular Economy Based on Industrial Symbiosis Strategies , 2016, Waste and Biomass Valorization.
[425] Jean Scholtz,et al. Human-Robot Interactions: Creating Synergistic Cyber Forces , 2002 .
[426] Johan Stahre,et al. Cognitive automation strategy for reconfigurable and sustainable assembly systems , 2013 .
[427] Stephan M. Liozu,et al. Mindful pricing: transforming organizations through value-based pricing , 2012 .
[428] Shlomo S. Sawilowsky,et al. Review of Twenty Nonparametric Statistics and Their Large Sample Approximations. , 2000 .
[429] Pieter Jan Stappers,et al. Materials in products selection: Tools for including user-interaction in materials selection , 2007 .
[430] Christian Grönroos,et al. Value-based sales process adaptation in business relationships , 2014 .
[431] Roy Fielding,et al. Architectural Styles and the Design of Network-based Software Architectures"; Doctoral dissertation , 2000 .
[432] Paul T. M. Ingenbleek,et al. Relating price strategies and price-setting practices , 2013 .
[433] Rikard Söderberg,et al. Individualizing Locator Adjustments of Assembly Fixtures Using a Digital Twin , 2019, J. Comput. Inf. Sci. Eng..
[434] Yasuhiro Sudo,et al. Agent Oriented Construction of a Digital Factory for Validation of a Production Scenario , 2012 .
[435] Tien-Chin Wang,et al. Developing a fuzzy TOPSIS approach based on subjective weights and objective weights , 2009, Expert Syst. Appl..
[436] Sein Leung Soo,et al. High performance cutting of advanced aerospace alloys and composite materials , 2015 .
[437] Xun Xu,et al. Machine Tool 4.0 for the new era of manufacturing , 2017 .
[438] Lorenzo Molinari Tosatti,et al. SafeNet of Unsafe Devices - Extending the Robot Safety in Collaborative Workspaces , 2013, ICINCO.
[439] M. Gustafsson,et al. Performance-based and functional contracting in value-based solution selling , 2016 .
[440] Bruce McMillin,et al. Software engineering: What is it? , 2018, 2018 IEEE Aerospace Conference.
[441] Shu-Yuan Pan,et al. Strategies on implementation of waste-to-energy (WTE) supply chain for circular economy system: a review , 2015 .
[442] Klaus-Dieter Thoben,et al. A survey of product lifecycle models: towards complex products and service offers , 2016 .
[443] Hermes Giberti,et al. An innovative machine for Fused Deposition Modeling of metals and advanced ceramics , 2016 .
[444] Marko P. Hekkert,et al. Conceptualizing the Circular Economy: An Analysis of 114 Definitions , 2017 .
[445] Detlef Zühlke,et al. Lean Automation enabled by Industry 4.0 Technologies , 2015 .
[446] Christoph Klahn,et al. Design Strategies for the Process of Additive Manufacturing , 2015 .
[447] Timo Lehtonen,et al. Brownfield Process: A method for modular product family development aiming for product configuration , 2016 .
[448] Andreas Eggert,et al. Selling Value in Business Markets: Individual and Organizational Factors for Turning the Idea into Action , 2017 .
[449] Dong Liang,et al. An emergy-based hybrid method for assessing industrial symbiosis of an industrial park , 2016 .
[450] Michael Rethmeier,et al. In-situ distortions in LMD additive manufacturing walls can be measured with digital image correlation and predicted using numerical simulations , 2018 .
[451] F. Krausmann,et al. How Circular is the Global Economy?: An Assessment of Material Flows, Waste Production, and Recycling in the European Union and the World in 2005 , 2015 .
[452] René C. Malak,et al. Software Tool for Planning and Analyzing Engineering Changes in Manufacturing Systems , 2013 .
[453] Giovanni Miragliotta,et al. Complexity management and supply chain performance assessment. A field study and a conceptual framework , 2004 .
[454] Juergen Jasperneite,et al. The Future of Industrial Communication: Automation Networks in the Era of the Internet of Things and Industry 4.0 , 2017, IEEE Industrial Electronics Magazine.
[455] Fritz Klocke,et al. Manufacturing Processes 2: Grinding, Honing, Lapping , 2009 .
[456] J. Loveland,et al. Transitioning from product to service-led growth in manufacturing firms: Emergent challenges in selecting and managing the industrial sales force , 2014 .
[457] Clément Gosselin,et al. Large-scale 3D printing with a cable-suspended robot , 2015 .
[458] Ching-chih Wei,et al. Development of a hybrid rapid prototyping system using low-cost fused deposition modeling and five-axis machining , 2014 .
[459] Andreas Hinterhuber,et al. Customer value‐based pricing strategies: why companies resist , 2008 .
[460] Péter Horváth,et al. Industrie 4.0 - Volkswirtschaftliches Potenzial für Deutschland , 2015 .
[461] Y. Tajima. Monitoring cure viscosity of epoxy composite , 1982 .
[462] Dan Högberg,et al. Supporting attention in manual assembly and its influence on quality , 2010 .
[463] Berend Denkena,et al. Model-based identification of tool runout in end milling and estimation of surface roughness from measured cutting forces , 2013 .
[464] Keng Peng Tee,et al. A Framework of Human–Robot Coordination Based on Game Theory and Policy Iteration , 2016, IEEE Transactions on Robotics.
[465] Charles E. Billings,et al. Aviation Automation: The Search for A Human-centered Approach , 1996 .
[466] C. Evans,et al. Damage processes in ceramics resulting from diamond tool indentation and scratching in various environments , 1995 .
[467] Christoph Walter,et al. Towards safe physical human-robot collaboration: A projection-based safety system , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.
[468] Lihui Wang,et al. Depth camera based collision avoidance via active robot control , 2014 .
[469] Keith Case,et al. Using mobile information sources to increase productivity and quality , 2010 .
[470] Bernd Noche,et al. A genetic algorithm for supermarket location problem , 2015 .
[471] A. Y. C. Nee,et al. Design and development of 3–DOF modular micro parallel kinematic manipulator , 2006 .
[472] Eeva Järvenpää,et al. Capability Matchmaking Procedure to Support Rapid Configuration and Re-configuration of Production Systems , 2017 .
[473] Renato Vidoni,et al. Requirements for the Design of Flexible and Changeable Manufacturing and Assembly Systems: A SME-survey , 2016 .
[474] T. Özel,et al. Investigations on the effects of friction modeling in finite element simulation of machining , 2010 .
[475] John Stark,et al. Product lifecycle management : 21st century paradigm for product realisation , 2005 .
[476] Modeling, Simulation, Information Technology and Processing , 2019 .
[477] Emel Kizilkaya Aydogan,et al. Balancing stochastic U-lines using particle swarm optimization , 2019, J. Intell. Manuf..
[478] Mateusz Lewandowski,et al. Designing the Business Models for Circular Economy—Towards the Conceptual Framework , 2016 .
[479] Daisuke Suzuki,et al. Using Pulse Laser Processing to Shape Cutting Edge of PcBN Tool for High-Precision Turning of Hardened Steel , 2013, Int. J. Autom. Technol..
[480] Marly Monteiro de Carvalho,et al. The circular economy umbrella: Trends and gaps on integrating pathways , 2018 .
[481] Rikard Söderberg,et al. Toward a Digital Twin for real-time geometry assurance in individualized production , 2017 .
[482] Ali Emrouznejad,et al. The state of the art development of AHP (1979–2017): a literature review with a social network analysis , 2017, Int. J. Prod. Res..
[483] Axel Schulz. Das Abrichten von keramisch gebundenen CBN-Schleifscheiben mit Formrollen , 1997 .
[484] Samuel Gomes,et al. An additive manufacturing oriented design approach to mechanical assemblies , 2018, J. Comput. Des. Eng..
[485] M. Elbestawi,et al. A Model for Chip Formation During Machining of Hardened Steel , 1996 .
[486] Guoping Li,et al. Fourth Industrial Revolution: technological drivers, impacts and coping methods , 2017, Chinese Geographical Science.
[487] Jorge Posada,et al. 9th International Conference on Knowledge Based and Intelligent Information and Engineering Systems a Perspective on Knowledge Based and Intelligent Systems Implementation in Industrie 4.0 , 2022 .
[488] M. Crang,et al. Interrogating the circular economy: the moral economy of resource recovery in the EU , 2015 .
[489] Sandro Wartzack,et al. Tolerance analysis of systems in motion taking into account interactions between deviations , 2013 .
[490] Nadège Benkamoun. Systemic design methodology for changeable manufacturing systems , 2016 .
[491] Sandro Wartzack,et al. A Quantitative Comparison of Tolerance Analysis Approaches for Rigid Mechanical Assemblies , 2016 .
[492] Marko Pfeifer,et al. A new strategy for ensuring human safety during various levels of interaction with industrial robots , 2017 .
[493] Mohammed A. Omar,et al. Production energy optimization using low dynamic programming, a decision support tool for sustainable manufacturing , 2015 .
[494] Ian Dodd,et al. Harmonising conflicts between science, regulation, perception and environmental impact: the case of soil conditioners from bioenergy. , 2015, Environment international.
[495] George Q. Huang,et al. Internet-of-Things-Enabled Smart Production Logistics Execution System Based on Cloud Manufacturing , 2014 .
[496] F. Wynstra,et al. Purchasing Higher-Value, Higher-Price Offerings in Business Markets , 2010 .
[497] Weston L. Baxter,et al. Contaminated Interaction: Another Barrier to Circular Material Flows , 2017 .
[498] Gisela Lanza,et al. The Concept of Robustness in Production Systems and its Correlation to Disturbances , 2014 .
[499] Sevgi Erdogan,et al. An experiment on the consistency of aggregated comparison matrices in AHP , 2006, Eur. J. Oper. Res..
[500] Ping Xue,et al. Optical computing for optical coherence tomography , 2016, Scientific reports.
[501] Ludo Waltman,et al. Software survey: VOSviewer, a computer program for bibliometric mapping , 2009, Scientometrics.
[502] D. J. Hill,et al. The effect of microwave resin preheating on the quality of laminates produced by resin transfer molding , 1997 .
[503] P. Jacobsen,et al. Complexity management in the food industry , 2016 .
[504] Matteo Parigi Polverini,et al. A computationally efficient safety assessment for collaborative robotics applications , 2017 .
[505] Peter A. Hancock,et al. The Future of Function Allocation , 1996 .
[506] Peter Nyhuis,et al. Mechanics of change: A framework to reconfigure manufacturing systems , 2013 .
[507] Giovanni Moroni,et al. Geometrical product specification and verification in additive manufacturing , 2017 .
[508] Albert Albers,et al. Procedure for Defining the System of Objectives in the Initial Phase of an Industry 4.0 Project Focusing on Intelligent Quality Control Systems , 2016 .
[509] Robin Passama,et al. A unified multimodal control framework for human-robot interaction , 2015, Robotics Auton. Syst..
[510] Krishna R. Pattipati,et al. Model-based prognostic techniques [maintenance applications] , 2003, Proceedings AUTOTESTCON 2003. IEEE Systems Readiness Technology Conference..
[511] Waguih ElMaraghy,et al. Design Method of Under-Body Platform Automotive Framing Systems , 2014 .
[512] Dragoljub Surdilovic,et al. Flexible Assembly Systems through Workplace-Sharing and Time- Sharing Human-Machine Cooperation (PISA) , 2010, ISR/ROBOTIK.
[513] Mustafa. Abstract , 1952 .
[514] Vijay Srinivasan,et al. An Integrated View of Geometrical Product Specification and Verification , 2003 .
[515] Luc Mathieu,et al. Integrated Design Method to Improve Producibility based on Product Key Characteristics and Assembly Sequences , 2001 .
[516] Katja Windt,et al. Analyzing the Influence of Capacity Adjustments on Performance Robustness in Dynamic Job-shop Environments , 2013 .
[517] Jingshan Li,et al. Throughput analysis of production systems: recent advances and future topics , 2009 .
[518] Y.-M. Deng,et al. The role of materials identification and selection in engineering design , 2007 .
[519] Yong Geng,et al. Regional initiatives on promoting cleaner production in China: a case of Liaoning , 2010 .
[520] Glen Mullineux,et al. Constraint-based approach to investigate the process flexibility of food processing equipment , 2006, Comput. Ind. Eng..
[521] Liangchi Zhang,et al. An FEM investigation into the behavior of metal matrix composites: tool-particle interaction during orthogonal cutting , 2007 .
[522] Lotfi Nabli,et al. Robust control of a manufacturing system: Flow-quality approach , 2008, 2008 IEEE International Conference on Emerging Technologies and Factory Automation.
[523] Marcello Pellicciari,et al. Models of Impact for Sustainable Manufacturing , 2016, ISPE TE.
[524] P. Manara,et al. Co-valorization of Crude Glycerol Waste Streams with Conventional and/or Renewable Fuels for Power Generation and Industrial Symbiosis Perspectives , 2016 .
[525] Tom Childs,et al. Metal cutting experiments and modelling for improved determination of chip/tool contact temperature by infrared thermography , 2015 .
[526] L. Lindkvist,et al. Developing a selective assembly technique for sheet metal assemblies , 2019, Int. J. Prod. Res..
[527] Peter Thorvald. Presenting information in manual assembly , 2011 .
[528] R. Merli,et al. How do scholars approach the circular economy? A systematic literature review , 2017 .
[529] J. Bergmann,et al. Temperature- and Time-Dependent Penetration of Surface Structures in Thermal Joining of Plastics to Metals , 2019, Key Engineering Materials.
[530] Michael Meskon,et al. The resource-based theory of competitive advantage : implications for strategy formulation , 2018 .
[531] Ray Y. Zhong,et al. Visualization of RFID-enabled shopfloor logistics Big Data in Cloud Manufacturing , 2015, The International Journal of Advanced Manufacturing Technology.
[532] L. Rosenhead. Conduction of Heat in Solids , 1947, Nature.
[533] Alois Knoll,et al. Modular Fault Ascription and Corrective Maintenance Using a Digital Twin , 2018 .
[534] Klaus Weinert,et al. Mechanistic identification of specific force coefficients for a general end mill , 2004 .
[535] John Ahmet Erkoyuncu,et al. Understanding service uncertainties in industrial product–service system cost estimation , 2011 .
[536] M. Abreu,et al. Critical elements for eco-retrofitting a conventional industrial park: Social barriers to be overcome. , 2017, Journal of environmental management.
[537] Berend Denkena,et al. Basics of Cutting and Abrasive Processes , 2013 .
[538] Johan Stahre,et al. TOWARDS AN OPERATOR 4.0 TYPOLOGY: A HUMAN-CENTRIC PERSPECTIVE ON THE FOURTH INDUSTRIAL REVOLUTION TECHNOLOGIES , 2016 .
[539] A. Kennedy,et al. Change Management , 2016 .
[540] Fei Tao,et al. Digital twin-driven product design, manufacturing and service with big data , 2017, The International Journal of Advanced Manufacturing Technology.
[541] E. Joachimsthaler,et al. How smart, connected products are transforming competition , 2015 .
[542] Lihui Wang,et al. Contact-less and Programming-less Human-Robot Collaboration , 2013 .
[543] Jeremy A Marvel,et al. Implementing Speed and Separation Monitoring in Collaborative Robot Workcells. , 2017, Robotics and computer-integrated manufacturing.
[544] Konrad Wegener,et al. Recent developments in grinding machines , 2017 .
[545] M. Fogarty. The Rhythm of Change , 1960, The Review of Politics.
[546] Georg Reischauer. Industry 4.0 as policy-driven discourse to institutionalize innovation systems in manufacturing , 2018, Technological Forecasting and Social Change.
[547] Cynthia F. Kurtz,et al. The new dynamics of strategy: sense-making in a complex and complicated world , 2003, IEEE Engineering Management Review.
[548] Rikard Söderberg,et al. An information and simulation framework for increased quality in welded components , 2018 .
[549] Paul T.M. Ingenbleek,et al. The theoretical foundations of value-informed pricing in the service-dominant logic of marketing , 2014 .
[550] Ajay Joneja,et al. A study on revolute joints in 3D-printed non-assembly mechanisms , 2016 .
[551] Pan Michaleris,et al. Experimental validation of finite element modeling for laser powder bed fusion deformation , 2016 .
[552] Hung-Suck Park,et al. Recent progress on innovative eco-industrial development , 2016 .
[553] Galina S. Maltugueva,et al. Application of case-based reasoning and multi-criteria decision-making methods for material selection in petrochemistry , 2018 .
[554] Nils Boysen,et al. Part logistics in the automotive industry: Decision problems, literature review and research agenda , 2015, Eur. J. Oper. Res..
[555] Tom Childs,et al. Ductile shear failure damage modelling and predicting built-up edge in steel machining , 2013 .
[556] Eric Tuegel,et al. Challenges with Structural Life Forecasting Using Realistic Mission Profiles , 2012 .
[557] Andreas Hinterhuber,et al. Towards value-based pricing—An integrative framework for decision making , 2004 .
[558] Åsa Fast-Berglund,et al. Towards a Human-Centred Reference Architecture for Next Generation Balanced Automation Systems: Human-Automation Symbiosis , 2015, APMS.
[559] John Ahmet Erkoyuncu,et al. An innovative uncertainty management framework to support contracting for product-service availability , 2014 .
[560] Francisco A. Candelas,et al. Safe human-robot interaction based on dynamic sphere-swept line bounding volumes , 2011 .
[561] R.G.J. Damgrave,et al. Enhancing development trajectories of synthetic environments , 2018 .
[562] Louis Rivest,et al. An assembly oriented design framework for product structure engineering and assembly sequence planning , 2011 .
[563] Pat Hanrahan,et al. Designing effective step-by-step assembly instructions , 2003, ACM Trans. Graph..
[564] J. Gibbons. Nonparametric measures of association , 1993 .
[565] Eeva Järvenpää,et al. Sustainability and performance indicators landscape , 2014 .
[566] K. Pattipati,et al. Model-based Prognostic Techniques , 2003 .
[567] Yong He,et al. Optimization of tool-path generation for material extrusion-based additive manufacturing technology ☆ , 2014 .
[568] W. Terkaja,et al. Virtual Factory Data Model to support Performance Evaluation of Production Systems , 2012 .
[569] Eeva Järvenpää,et al. Product Model ontology and its use in capability-based matchmaking , 2018 .
[570] H. Kishawy,et al. Surface characteristics of machined aluminium metal matrix composites , 2006 .
[571] Keith Jackson,et al. Digital Manufacturing and Flexible Assembly Technologies for Reconfigurable Aerospace Production Systems , 2016 .
[572] Neville A. Stanton,et al. Sub-systems on the road to vehicle automation: Hands and feet free but not 'mind' free driving , 2014 .
[573] N. Bocken,et al. Product design and business model strategies for a circular economy , 2016 .
[574] N. Pantelelis,et al. ONLINE INTELLIGENT CURE MONITORING FOR AEROSPACE APPLICATIONS , 2017 .
[575] Reid G. Simmons,et al. Sensor fusion for human safety in industrial workcells , 2012, 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems.
[576] Yong Huang,et al. Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations , 2015 .
[577] Anna Granlund,et al. Lean Automation: Requirements and Solutions for Efficient use of Robot Automation in the Swedish Manufacturing Industry , 2011 .
[578] Achim Kampker,et al. Integrated Product and Process Development: Modular Production Architectures based on Process Requirements , 2014 .
[579] Urbas Leon,et al. Automatic Model Generation for Virtual Commissioning based on Plant Engineering Data , 2014 .
[580] Hamidreza Eskandari,et al. Assembly line design considering line balancing and part feeding , 2017 .
[581] Emanuele Borgonovo,et al. Global sensitivity measures from given data , 2013, Eur. J. Oper. Res..
[582] P. Michaleris,et al. In situ monitoring and characterization of distortion during laser cladding of Inconel® 625 , 2015 .
[583] Pia Oedewald,et al. Measuring maintenance culture and maintenance core task with CULTURE-questionnaire––a case study in the power industry , 2004 .
[584] D. B. Pedersen,et al. Evaluation of polymer micro parts produced by additive manufacturing processes using vat photopolymerization method , 2017 .
[585] J. T. Hammer,et al. Plastic Deformation and Ductile Fracture of Ti-6Al-4V under Various Loading Conditions , 2012 .
[586] H. Chesbrough. Business Model Innovation: Opportunities and Barriers , 2010 .
[587] Eeva Järvenpää,et al. Value Proposition of a Resource Description Concept in a Production Automation Domain , 2018 .
[588] T. Saaty. Fundamentals of Decision Making and Priority Theory With the Analytic Hierarchy Process , 2000 .
[589] Matteo Parigi Polverini,et al. Real-time collision avoidance in human-robot interaction based on kinetostatic safety field , 2014, 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems.
[590] Mette Mosgaard,et al. Local circles in a circular economy: - the case of smartphone repair in Denmark , 2016 .
[591] André Crosnier,et al. Collaborative manufacturing with physical human–robot interaction , 2016 .
[592] Bilal Ahmad,et al. Engineering Methods and Tools for Cyber–Physical Automation Systems , 2016, Proceedings of the IEEE.
[593] Xuan Song,et al. Development of a Low-Cost Parallel Kinematic Machine for Multidirectional Additive Manufacturing , 2015 .
[594] M. Reunanen,et al. Availability and sustainability as value elements in assessing customer value of an industrial service , 2011, 2011 Proceedings of PICMET '11: Technology Management in the Energy Smart World (PICMET).
[595] D. Goodin. The cambridge dictionary of statistics , 1999 .
[596] J. Banks,et al. Discrete-Event System Simulation , 1995 .
[597] Filippo Fontana,et al. What Benefits do Initiatives Such as Industry 4.0 Offer for Production Locations in High-wage Countries? , 2017 .
[598] Roland Rosen,et al. About The Importance of Autonomy and Digital Twins for the Future of Manufacturing , 2015 .
[599] Anurag Agarwal,et al. The Internet of Things—A survey of topics and trends , 2015, Inf. Syst. Frontiers.
[600] Roger Flage,et al. Comparing and integrating the NUSAP notational scheme with an uncertainty based risk perspective , 2016, Reliab. Eng. Syst. Saf..
[601] Rikard Söderberg,et al. Inspection Data to Support a Digital Twin for Geometry Assurance , 2017 .
[602] Ibrahim Ciftci,et al. Evaluation of tool wear when machining SiCp-reinforced Al-2014 alloy matrix composites , 2004 .
[603] Mohamad Bdiwi. Integrated Sensors System for Human Safety during Cooperating with Industrial Robots for Handing-over and Assembling Tasks , 2014 .
[604] María Jesús Álvarez,et al. A new heuristic-based bi-objective simulated annealing method for U-shaped assembly line balancing , 2016 .
[605] Alain Bernard,et al. The evolution, challenges, and future of knowledge representation in product design systems , 2013, Comput. Aided Des..
[606] M. Rethmeier,et al. Investigation of solidification cracking susceptibility during laser beam welding using an in-situ observation technique , 2018 .
[607] Xichun Luo,et al. Investigation of microstructured milling tool for deferring tool wear , 2011 .
[608] J.E. Pakkala,et al. Work In Progress: Implementing a Digital Factory University Network , 2006, Proceedings. Frontiers in Education. 36th Annual Conference.
[609] Berend Denkena,et al. Contact zone analysis based on multidexel workpiece model and detailed tool geometry representation , 2012 .
[610] Dimitris Kiritsis,et al. Research issues on product lifecycle management and information tracking using smart embedded systems , 2003, Adv. Eng. Informatics.
[611] Carlos Rodrigues Rocha,et al. A comparison between the Denavit-Hartenberg and the screw-based methods used in kinematic modeling of robot manipulators , 2011 .
[612] M. Hellström,et al. Embracing uncertainty in value-based selling by means of design thinking , 2017 .
[613] Philippe Serré,et al. The TTRSs : 13 Constraints for Dimensioning and Tolerancing , 1998 .
[614] C. Anderson‐Cook. The Cambridge Dictionary of Statistics (2nd ed.) , 2003 .
[615] Kevin W Eliceiri,et al. NIH Image to ImageJ: 25 years of image analysis , 2012, Nature Methods.
[616] Åsa Fast-Berglund,et al. Smart Automation - metoder för slutmontering , 2017 .
[617] Hanna Klinga,et al. Informationshantering och kunskapsåteranvändning i produktion , 2017 .
[618] A. Roy Choudhury,et al. Extruder path generation for Curved Layer Fused Deposition Modeling , 2008, Comput. Aided Des..
[619] Sandro Wartzack,et al. Shaping the digital twin for design and production engineering , 2017 .
[620] George Chryssolouris,et al. Manufacturing Systems: Theory and Practice , 1992 .
[621] Gudela Grote,et al. Uncertainty management at the core of system design , 2003, Annu. Rev. Control..
[622] Saeed Mansour,et al. Design opportunities with rapid manufacturing , 2003 .
[623] Matthew A. Davies,et al. Recent advances in modelling of metal machining processes , 2013 .
[624] Tullio Tolio,et al. Virtual Factory: An Integrated Framework for Manufacturing Systems Design and Analysis☆ , 2013 .
[625] Bijan Shirinzadeh,et al. Flexible fixturing for workpiece positioning and constraining , 2002 .
[626] Xiangyu Liu,et al. The pricing of product and value-added service under information asymmetry: a product life cycle perspective , 2015 .
[627] Jean-Pierre Belaud,et al. Toward an eco-innovative method based on a better use of resources: application to chemical process preliminary design , 2012 .
[629] G. Byrne,et al. Dynamics of chip formation during orthogonal cutting of titanium alloy Ti–6Al–4V , 2008 .
[630] Carl H. Hauser,et al. Experimental and computational appraisal of the shape accuracy of a thin-walled virole aero-engine casing manufactured by means of laser metal deposition , 2017, Prod. Eng..
[631] Daniel Kindström,et al. Adding services to product-based portfolios , 2015 .
[632] Andreas Eggert,et al. How sales strategy translates into performance: The role of salesperson customer orientation and value-based selling , 2015 .
[633] Alexandre Dolgui,et al. Assembly line balancing under uncertainty: Robust optimization models and exact solution method , 2013, Comput. Ind. Eng..
[634] Dimitris Mourtzis,et al. Digital manufacturing: History, perspectives, and outlook , 2009 .
[635] Brian Mellor,et al. Multiple material additive manufacturing – Part 1: a review , 2013 .
[636] Y. Zhu,et al. Influence of alumina particles on the mechanics of machining metal matrix composites , 2005 .
[637] Hao Tan,et al. China's move to a Circular Economy as a development strategy , 2011 .
[638] S. Joshi,et al. Optimizing Polymer Infusion Process for Thin Ply Textile Composites with Novel Matrix System , 2017, Materials.
[639] Lazhar Homri,et al. Geometrical variations management for additive manufactured product , 2017 .
[640] Arthur C. Sanderson,et al. AND/OR graph representation of assembly plans , 1986, IEEE Trans. Robotics Autom..
[641] Daniel Kindström,et al. Triadic Value Propositions: When It Takes More Than Two to Tango , 2016 .
[642] Andreas Holzinger,et al. Efficiency in Learning: Evidence-Based Guidelines to Manage Cognitive Load , 2007, J. Educ. Technol. Soc..
[643] Tor Guimaraes,et al. Empirically testing the impact of manufacturing system complexity on performance , 1999 .
[644] R. B. Woodruff,et al. RESEARCH ON BUSINESS-TO-BUSINESS CUSTOMER VALUE AND SATISFACTION , 2003 .
[645] Alexander Verl,et al. Cooperation of human and machines in assembly lines , 2009 .
[646] W. B. Rowe,et al. Principles of Modern Grinding Technology , 2009 .
[647] M. Hekkert,et al. Conceptualizing the Circular Economy: An Analysis of 114 Definitions , 2017 .
[648] J. E. Hirsch,et al. An index to quantify an individual's scientific research output , 2005, Proc. Natl. Acad. Sci. USA.
[649] Serenella Sala,et al. Beyond the throwaway society: A life cycle‐based assessment of the environmental benefit of reuse , 2015, Integrated environmental assessment and management.
[650] J. Korhonen,et al. Circular Economy: The Concept and its Limitations , 2018 .
[651] Claudiu L Giusca,et al. Calibration of the scales of areal surface topography-measuring instruments: part 1. Measurement noise and residual flatness , 2012 .
[652] R. Rajala,et al. Barriers to implementing value-based pricing in industrial markets: A micro-foundations perspective , 2017 .
[653] P. Sivasankaran,et al. Literature review of assembly line balancing problems , 2014 .
[654] Yoram Koren,et al. Design of reconfigurable manufacturing systems , 2010 .
[655] Detlef Zühlke,et al. Towards a lean automation interface for workstations , 2017, Int. J. Prod. Res..
[656] Jon C. Helton,et al. Quantification of margins and uncertainties: Alternative representations of epistemic uncertainty , 2011, Reliab. Eng. Syst. Saf..
[657] Milad Avazbeigi,et al. A material selection methodology and expert system for sustainable product design , 2011 .
[658] Michael A. Peshkin,et al. Cobots: a novel material handling technology , 1998 .
[659] Jon C. Helton,et al. Alternative representations of epistemic uncertainty , 2004, Reliab. Eng. Syst. Saf..
[660] Leonardo Rosado,et al. Circular economy – From review of theories and practices to development of implementation tools , 2017, Resources, Conservation and Recycling.
[661] Brian N. Turner,et al. A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness , 2015 .
[662] Tobias Surmann,et al. Simulation of milling tool vibration trajectories along changing engagement conditions , 2007 .
[663] K. Lewin. Frontiers in Group Dynamics , 1947 .
[664] R. Rajala,et al. Aligning the Mindset and Capabilities within a Business Network for Successful Adoption of Smart Services , 2018, Journal of Product Innovation Management.
[665] Carmen Constantinescu,et al. Development and evaluation of a knowledge-based decision-making approach for designing changeable manufacturing systems , 2017 .
[666] G. Zunjare. PRINCIPLES OF CHARACFER ETHICS REFLECTED IN STEPHEN R. COVERY’S NOVEL THE 7 HABITS OF HIGHLY EFFECTIVE PEOPLE. , 2017 .
[667] Holly A. Yanco,et al. A Taxonomy for Human-Robot Interaction , 2002 .
[668] Glen Mullineux,et al. Late customisation: issues of mass customisation in the food industry , 2010 .
[669] Jiangwei Chu,et al. Development pattern and enhancing system of automotive components remanufacturing industry in China , 2011 .
[670] Janis Terpenny,et al. Harnessing Product Complexity: Step 1—Establishing Product Complexity Dimensions and Indicators , 2011 .
[671] A. Rashid,et al. Towards circular economy implementation: a comprehensive review in context of manufacturing industry , 2016 .
[672] Nathan W. Hartman,et al. Towards an extended model-based definition for the digital twin , 2017 .
[673] Janet Efstathiou,et al. Advances on measuring the operational complexity of supplier-customer systems , 2006, Eur. J. Oper. Res..
[674] Rajkumar Roy,et al. Continuous maintenance and the future – Foundations and technological challenges , 2016 .
[675] Adrian Sayers,et al. Tips and tricks in performing a systematic review. , 2007, The British journal of general practice : the journal of the Royal College of General Practitioners.
[676] Marek Vacek,et al. Robotic manipulator with optical safety system , 2015, 2015 International Conference on Electrical Drives and Power Electronics (EDPE).
[677] Joseph P. Cannon,et al. The Role of the Sales Force in Value Creation and Appropriation: New Directions for Research , 2012 .
[678] Feng Duan,et al. Human-robot collaboration in cellular manufacturing: Design and development , 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems.
[679] Helmut Yabar,et al. Energy intensity trends and scenarios for China’s industrial sectors: a regional case study , 2011 .
[680] Sandra Mattsson,et al. DESIGN OF SIMPLE GUIDELINES TO IMPROVE ASSEMBLY INSTRUCTIONS AND OPERATOR PERFORMANCE , 2014 .
[681] Eeva Järvenpää,et al. Formal Resource and Capability Models supporting Re-use of Manufacturing Resources , 2018 .
[682] G. Ganesan,et al. A CRITICAL STUDY ON MACHINING OF Al/SiC COMPOSITES , 2001 .
[683] ZhangYingfeng,et al. Real-time information capturing and integration framework of the internet of manufacturing things , 2015 .
[684] Gunilla Sivard,et al. Integration of Digital Factory with Smart Factory Based on Internet of Things , 2016 .
[685] Oliver Völker,et al. Industrial Product-Service Systems (IPS2) , 2011 .
[686] Cecil Armstrong,et al. Optimization of Aircraft Fuselage Assembly Process Using Digital Manufacturing , 2007, J. Comput. Inf. Sci. Eng..
[687] Pedro J. Arrazola,et al. Characterisation of friction and heat partition coefficients at the tool-work material interface in cutting , 2013 .
[688] Dalila B.M.M. Fontes,et al. A modified particle swarm optimisation algorithm to solve the part feeding problem at assembly lines , 2016 .
[689] Christoph Walter,et al. A projection-based sensor system for safe physical human-robot collaboration , 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems.
[690] Paulo Leitão,et al. Industrial automation based on cyber-physical systems technologies: Prototype implementations and challenges , 2016, Comput. Ind..
[691] Hans-Peter Wiendahl,et al. Virtual factory design--a new tool for a co-operative planning approach , 2003, Int. J. Comput. Integr. Manuf..
[692] L. Svensson,et al. Investigation of laser metal deposited Alloy 718 onto an EN 1.4401 stainless steel substrate , 2017 .
[693] Nicolas Gayton,et al. Mathematical issues in mechanical tolerance analysis , 2012 .
[694] F. Musharavati. RECONFIGURABLE MANUFACTURING SYSTEMS , 2010 .
[695] Eeva Järvenpää,et al. Creating Resource Combinations Based on Formally Described Hardware Interfaces , 2018, IPAS.
[696] Guido A.O. Adam,et al. Design for Additive Manufacturing—Element transitions and aggregated structures , 2014 .
[697] Hiroya Tanaka,et al. Growable Robot with 'Additive-Additive-Manufacturing' , 2018, CHI Extended Abstracts.
[698] F. Blomsma,et al. The Emergence of Circular Economy: A New Framing Around Prolonging Resource Productivity , 2017 .
[699] Luca Fumagalli,et al. Flexible Automation and Intelligent Manufacturing , FAIM 2017 , 27-30 June 2017 , Modena , Italy A review of the roles of Digital Twin in CPS-based production systems , 2017 .
[700] Lihui Wang,et al. Research Letters Vision-guided active collision avoidance for human-robot collaborations , 2013 .
[701] Erhan Budak,et al. Design of Serrated End Mills for Improved Productivity , 2017 .
[702] E. Hultink,et al. The Circular Economy - A New Sustainability Paradigm? , 2017 .
[703] Ihsan Hakan Selvi,et al. An expert system based material selection approach to manufacturing , 2013 .
[704] Jessica Bruch,et al. Designing proactive assembly systems – Criteria and interaction between automation, information, and competence , 2009 .
[705] Lihui Wang,et al. Human-robot collaborative assembly in cyber-physical production: Classification framework and implementation , 2017 .
[706] Pascal Lafon,et al. Integrated Design for Additive Manufacturing Based on Skin-Skeleton Approach , 2017 .
[707] W. Possart,et al. Laser Assisted Joining of Hybrid Polyamide-aluminum Structures☆ , 2014 .
[708] John Paul Macduffie,et al. Product variety and manufacturing performance: evidence from the international automotive assembly plant study , 1996 .
[709] Marta Indulska,et al. Business Process Modeling- A Comparative Analysis , 2009, J. Assoc. Inf. Syst..
[710] F. Mas,et al. Virtual Verification of an Aircraft Final Assembly Line Industrialization: An Industrial Case , 2012 .
[711] Paolo Coletti,et al. Mass Customization: An Exploration of European Characteristics , 2011 .
[712] J. Barney. Firm Resources and Sustained Competitive Advantage , 1991 .
[713] George Chryssolouris,et al. A RUL calculation approach based on physical-based simulation models for predictive maintenance , 2017, 2017 International Conference on Engineering, Technology and Innovation (ICE/ITMC).
[714] Jessica Bruch,et al. Reconfigurable Manufacturing – An Enabler for a Production System Portfolio Approach , 2016 .
[715] S. Michael Spottswood,et al. Reengineering Aircraft Structural Life Prediction Using a Digital Twin , 2011 .
[716] Simon Ford,et al. Additive manufacturing and sustainability: an exploratory study of the advantages and challenges , 2016 .
[717] D. Moher,et al. Preferred reporting items for systematic reviews and meta-analyses: the PRISMA statement. , 2010, International journal of surgery.
[718] Peter Hehenberger,et al. Mechatronic Futures: Challenges and Solutions for Mechatronic Systems and their Designers , 2016 .
[719] Zetian Fu,et al. The development of renewable energy in resource-rich region: A case in China , 2011 .
[720] Günther Schuh,et al. Managing variations in products, processes and manufacturing systems , 2009 .
[721] Fei Tao,et al. CCIoT-CMfg: Cloud Computing and Internet of Things-Based Cloud Manufacturing Service System , 2014, IEEE Transactions on Industrial Informatics.
[722] Albert Weckenmann,et al. A model- and simulation-based approach for tolerancing and verifying the functional capability of micro/nano-structured workpieces , 2015 .
[723] Dimitris Kiritsis,et al. Energy Management in Manufacturing: From Literature Review to a Conceptual Framework , 2017 .
[725] Hans-Georg Kemper,et al. A survey on changeability of machine tools , 2012 .
[726] Robert Smillie,et al. Guidelines for Developing Instructions , 2004 .
[727] Maurizio Faccio,et al. “Supermarket warehouses”: stocking policies optimization in an assembly-to-order environment , 2010 .
[728] Eric Lutters. Pilot production environments driven by digital twins , 2018 .
[729] George Chryssolouris,et al. An efficient approach to human motion modeling for the verification of human-centric product design and manufacturing in virtual environments , 2007 .
[730] Chang Yu,et al. Process analysis of eco-industrial park development - the case of Tianjin, China , 2014 .
[731] Carmen Constantinescu,et al. Information Support and Interactive Planning in the Digital Factory: Approach and Industry-driven Evaluation☆ , 2014 .
[732] Daniel P. Thunnissen,et al. Uncertainty Classification for the Design and Development of Complex Systems , 2003 .
[733] Stephan M. Liozu,et al. Pricing orientation, pricing capabilities, and firm performance , 2013 .
[734] Giovanni Moroni,et al. Tolerancing: Managing uncertainty from conceptual design to final product , 2018 .
[735] A. Korobenko,et al. Isogeometric Fatigue Damage Prediction in Large-Scale Composite Structures Driven by Dynamic Sensor Data , 2015 .
[736] Åsa Fast-Berglund,et al. How to Support Intuition in Complex Assembly , 2016 .
[737] F. GANIER. Factors affecting the processing of procedural instructions: implications for document design , 2004, IEEE Transactions on Professional Communication.
[738] Colin Robson,et al. Real world research : a resource for users of social research methods in applied settings , 2011 .
[739] Antonio Armillotta,et al. Selection of layered manufacturing techniques by an adaptive AHP decision model , 2008 .
[740] R. Amit,et al. The Business Model: Recent Developments and Future Research , 2011 .
[741] Consistency Management Of Simulation Information In Digital Factory , 2010 .
[742] Mario Kienzler. Value-based pricing and cognitive biases : An overview for business markets , 2018 .
[743] Qinghua Zhu,et al. Implementing China's circular economy concept at the regional level: a review of progress in Dalian, China. , 2009, Waste management.
[744] Sandro Wartzack,et al. 13th CIRP Conference on Computer Aided Tolerancing Tolerance Analysis of rotating Mechanism based on Skin Model Shapes in discrete Geometry , 2015 .
[745] R. Willink. An improved procedure for combining Type A and Type B components of measurement uncertainty , 2013 .
[746] Rafiq Ahmad,et al. Human-Robot Collaboration: Twofold strategy algorithm to avoid collisions using ToF sensor , 2014 .
[747] André Leme Fleury,et al. An overview of the literature on technology roadmapping (TRM): Contributions and trends , 2013 .
[748] Christopher Saldana,et al. Advances in material and friction data for modelling of metal machining , 2017 .
[749] Thomas Maier,et al. Workpiece and Machine Design in Additive Manufacturing for Multi-Axis Fused Deposition Modeling☆ , 2017 .
[750] R. B. Woodruff,et al. Customer value: The next source for competitive advantage , 1997 .
[751] Alain Bernard,et al. Product Variety Management , 1998 .
[752] S. Jeschke,et al. Integrative Production Technology for High-wage Countries , 2012 .
[753] K. Storbacka. A solution business model: Capabilities and management practices for integrated solutions , 2011 .
[754] Peter Nyhuis,et al. Changeable Manufacturing - Classification, Design and Operation , 2007 .
[755] Karthik Ramani,et al. The Design for Additive Manufacturing Worksheet , 2016 .
[756] Risto Rajala,et al. Assessing Customer-Perceived Value in Industrial Service Systems , 2015 .
[757] Andrew Y. C. Nee,et al. Towards a generic distributed and collaborative digital manufacturing , 2007 .
[758] Hamideh Afsarmanesh,et al. Virtual Enterprise Modeling and Support Infrastructures: Applying Multi-agent System Approaches , 2001, EASSS.
[759] Ann-Christine Falck,et al. Proactive assessment of basic complexity in manual assembly: development of a tool to predict and control operator-induced quality errors , 2017, Int. J. Prod. Res..
[760] A.A. West,et al. A component-based distributed control system for assembly automation , 2004, 2nd IEEE International Conference on Industrial Informatics, 2004. INDIN '04. 2004.
[761] L. Ngo,et al. Examining the Firm's Value Creation Process: A Managerial Perspective of the Firm's Value Offering Strategy and Performance , 2011 .
[762] Alexandre Dolgui,et al. Ergonomics in assembly line balancing based on energy expenditure: a multi-objective model , 2016 .
[763] O. W. Salomons,et al. Product Modelling for Model-Based Maintenance , 1998 .
[764] Wolfgang Wieser,et al. High definition live 3D-OCT in vivo: design and evaluation of a 4D OCT engine with 1 GVoxel/s. , 2014, Biomedical optics express.
[765] Ivan Lundberg,et al. Safety of collaborative industrial robots: Certification possibilities for a collaborative assembly robot concept , 2011, 2011 IEEE International Symposium on Assembly and Manufacturing (ISAM).
[766] Lili Liu,et al. Waste prevention for sustainable resource and waste management , 2017, Journal of Material Cycles and Waste Management.
[767] Morteza Yazdani,et al. Analysis in Material Selection: Influence of Normalization Tools on COPRAS-G , 2017 .
[768] Xun Xu,et al. Selection of additive manufacturing processes , 2017 .
[769] Wolfgang Ulaga. Capturing value creation in business relationships: A customer perspective , 2003 .
[770] Tsan-Ming Choi,et al. Big Data Analytics in Operations Management , 2018 .
[771] Hao Luo,et al. Physical assets and service sharing for IoT-enabled Supply Hub in Industrial Park (SHIP) , 2015 .
[772] Boris Brinzer,et al. Complexity Thinking and Cyber-Physical Systems , 2017 .
[773] Michael F. Zaeh,et al. Laser Surface Pre-treatment of Aluminium for Hybrid Joints with Glass Fibre Reinforced Thermoplastics , 2014 .
[774] Mathias Schmitt,et al. Towards Industry 4.0 - Standardization as the crucial challenge for highly modular, multi-vendor production systems , 2015 .
[775] Alessandro De Luca,et al. Real-Time Computation of Distance to Dynamic Obstacles With Multiple Depth Sensors , 2017, IEEE Robotics Autom. Lett..
[776] P. Matthyssens,et al. Boosting servitization through digitization: Pathways and dynamic resource configurations for manufacturers , 2017 .
[777] S. Berg. Snowball Sampling—I , 2006 .
[778] Jean-Yves Hascoët,et al. A novel methodology of design for Additive Manufacturing applied to Additive Laser Manufacturing process , 2014 .
[779] Eric J. Tuegel,et al. The Airframe Digital Twin: Some Challenges to Realization , 2012 .
[780] Thorsten Wuest,et al. Cascade Use and the Management of Product Lifecycles , 2017 .
[781] Yong Geng,et al. A review on China's pollutant emissions reduction assessment , 2014 .
[782] Yuansun Wu,et al. Microstructure and mechanical properties of commercial, bronze-bond, diamond-abrasive tool materials , 2010, Journal of Materials Science.
[783] Terrence Fong,et al. A Survey of Methods for Safe Human-Robot Interaction , 2017, Found. Trends Robotics.
[784] Petr Hořejší,et al. Augmented Reality System for Virtual Training of Parts Assembly , 2015 .