The synthesis of six-bar linkages as constrained planar 3R chains

Abstract In this paper, we constrain a planar serial chain formed by three revolute joints, so that it becomes a one degree-of-freedom six-bar linkage. Our focus is on the various ways that two RR chains can be attached to constrain the links of the 3R chain, and ensure that the end-effector passes through a set of five specified task positions. This synthesis process yields designs for the Watt I and Stephenson I, II, and III six-bar linkages. This approach does not apply to the Watt II because its floating link is not connected to the ground frame by a 3R chain. We demonstrate the synthesis process with the design of a six-bar steering linkage intended for use on a gravity racer.

[1]  S. Pramanik,et al.  Kinematic Synthesis of a Six-Member Mechanism for Automotive Steering , 2002 .

[2]  Vijay Kumar,et al.  Kinematic and Kinetostatic Synthesis of Planar Coupled Serial Chain Mechanisms , 2002 .

[3]  F. Freudenstein.  Advanced mechanism design: Analysis and synthesis: Vol. 2, by G. N. Sandor and A. G. Erdman. Prentice-Hall Inc., Englewood Cliffs, New Jersey, 1984, 688 p , 1985 .

[4]  Panos S. Shiakolas,et al.  On the Optimum Synthesis of Six-Bar Linkages Using Differential Evolution and the Geometric Centroid of Precision Positions Technique , 2005 .

[5]  McCarthy,et al.  Geometric Design of Linkages , 2000 .

[6]  Todor Todorov.  Synthesis of Watt's six-link mechanism for manipulation action in relative space , 1997 .

[7]  John J. Craig,et al.  Introduction to Robotics Mechanics and Control , 1986 .

[8]  A. H. Soni,et al.  Synthesis of six-link mechanisms for point path generation , 1971 .

[9]  Donald R. Riley,et al.  Triad Synthesis for up to Five Design Positions With Application to the Design of Arbitrary Planar Mechanisms , 1986 .

[10]  P. A. Simionescu,et al.  Optimum synthesis of the four-bar function generator in its symmetric embodiment: the Ackermann steering linkage , 2002 .

[11]  Arthur G. Erdman,et al.  Dimensional synthesis of planar triads: Motion generation with prescribed timing for six precision positions , 1987 .

[12]  Charles W. Wampler,et al.  Solving the Kinematics of Planar Mechanisms by Dixon Determinant and a Complex-Plane Formulation , 2001 .

[13]  J. Michael McCarthy,et al.  Introduction to theoretical kinematics , 1990 .

[14]  T. Chase,et al.  Circuits and Branches of Single-Degree-of-Freedom Planar Linkages , 1990 .

[15]  L. W. Tsai,et al.  Robot Analysis: The Mechanics of Serial and Parallel Ma-nipulators , 1999 .

[16]  Sundar Krishnamurty,et al.  A generalized exact gradient method for mechanism synthesis , 1996 .

[17]  Donald L. Cronin,et al.  Steering error optimization of the Macpherson strut automotive front suspension , 1985 .

[18]  P. A. Simionescu,et al.  Initial Estimates in the Design of Rack-and-Pinion Steering Linkages , 2000 .