Acceleration-based Assistive Strategy to Control a Back-support Exoskeleton for Load Handling: Preliminary Evaluation

Industrial active exoskeletons have recently achieved considerable interest, due to their intrinsic versatility compared to passive devices. To achieve this versatility, an important open challenge is the design of appropriate control strategies to automatically modulate the physical assistance according to the activity the user is performing.This work focuses on active back-support exoskeletons. To improve the assistance provided in dynamic situations with respect to state-of-the-art methods, a new strategy making use of the angular acceleration of the user’s trunk is presented.The feasibility and effectiveness of the proposed strategy were tested experimentally on a prototype in a load handling task. The main advantages in terms of assistive torque profiles emerge during the transition phases of the movement (i.e. beginning and end of lowering and lifting) indicating an appropriate adaptation to the dynamics of the execution.In this preliminary evaluation, the data on peak muscular activity at the spine show promising trends, encouraging further developments and a more detailed evaluation.

[1]  R. Norman,et al.  A comparison of peak vs cumulative physical work exposure risk factors for the reporting of low back pain in the automotive industry. , 1998, Clinical biomechanics.

[2]  H. Kobayashi,et al.  Improvement and quantitative performance estimation of the back support muscle suit , 2013, 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

[3]  Shane D. Ross,et al.  Positive Feedback in Powered Exoskeletons: Improved Metabolic Efficiency at the Cost of Reduced Stability? , 2007 .

[4]  M. de Looze,et al.  The effects of a passive exoskeleton on muscle activity, discomfort and endurance time in forward bending work. , 2016, Applied ergonomics.

[5]  Daniel P Ferris,et al.  Biomechanics and energetics of walking in powered ankle exoskeletons using myoelectric control versus mechanically intrinsic control , 2018, Journal of NeuroEngineering and Rehabilitation.

[6]  Axel S. Koopman,et al.  Effects of an Inclination-Controlled Active Spinal Exoskeleton on Spinal Compression Forces , 2018, Biosystems and Biorobotics.

[7]  W. Marras,et al.  An EMG-assisted model of trunk loading during free-dynamic lifting. , 1995, Journal of biomechanics.

[8]  L. Punnett,et al.  Work-related musculoskeletal disorders: the epidemiologic evidence and the debate. , 2004, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[9]  Donald S. Bloswick,et al.  The Effect of Lifting Speed on Cumulative and Peak Biomechanical Loading for Symmetric Lifting Tasks , 2013, Safety and health at work.

[10]  Darwin G. Caldwell,et al.  A wearable device for reducing spinal loads during lifting tasks: Biomechanics and design concepts , 2015, 2015 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[11]  Jacek M. Zurada,et al.  Classifying the risk of work related low back disorders due to manual material handling tasks , 2012, Expert Syst. Appl..

[12]  Yoshiyuki Sankai,et al.  Development of HAL for Lumbar Support , 2010 .

[13]  T P Andriacchi,et al.  Influence of dynamic factors on the lumbar spine moment in lifting. , 1988, Ergonomics.

[14]  Dong Jin Hyun,et al.  Waist-assistive exoskeleton powered by a singular actuation mechanism for prevention of back-injury , 2018, Robotics Auton. Syst..

[15]  Darwin G. Caldwell,et al.  Rationale, Implementation and Evaluation of Assistive Strategies for an Active Back-Support Exoskeleton , 2018, Front. Robot. AI.

[16]  S. Kumar,et al.  Theories of musculoskeletal injury causation , 2001, Ergonomics.

[17]  T. Waters,et al.  Evaluation of spinal loading during lowering and lifting. , 1998, Clinical biomechanics.

[18]  M. Frings-Dresen,et al.  The effect of lifting during work on low back pain: a health impact assessment based on a meta-analysis , 2014, Occupational and Environmental Medicine.

[19]  I. Kingma,et al.  Validation of a full body 3-D dynamic linked segment model , 1996 .

[20]  Frank Krause,et al.  Exoskeletons for industrial application and their potential effects on physical work load , 2016, Ergonomics.

[21]  Jacek Cholewicki,et al.  Modeling the human lumbar spine for assessing spinal loads, stability, and risk of injury. , 2003, Critical reviews in biomedical engineering.

[22]  J. C. Davies,et al.  Manual handling injuries and long term disability , 2003 .

[23]  Yoshiyuki Sankai,et al.  The hybrid assistive limb (HAL) for Care Support successfully reduced lumbar load in repetitive lifting movements , 2018, Journal of Clinical Neuroscience.

[24]  Michael J Agnew,et al.  The effect of an on-body personal lift assist device (PLAD) on fatigue during a repetitive lifting task. , 2009, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[25]  Lorenzo Grazi,et al.  A Real-Time Lift Detection Strategy for a Hip Exoskeleton , 2018, Front. Neurorobot..

[26]  W S Marras,et al.  Biomechanical risk factors for occupationally related low back disorders. , 1995, Ergonomics.

[27]  Riccardo Muradore,et al.  Impedance control of series elastic actuators: Passivity and acceleration-based control , 2017 .