Modeling and evaluating the performance of Brillouin distributed optical fiber sensors.

A thorough analysis of the key factors impacting on the performance of Brillouin distributed optical fiber sensors is presented. An analytical expression is derived to estimate the error on the determination of the Brillouin peak gain frequency, based for the first time on real experimental conditions. This expression is experimentally validated, and describes how this frequency uncertainty depends on measurement parameters, such as Brillouin gain linewidth, frequency scanning step and signal-to-noise ratio. Based on the model leading to this expression and considering the limitations imposed by nonlinear effects and pump depletion, a figure-of-merit is proposed to fairly compare the performance of Brillouin distributed sensing systems. This figure-of-merit offers to the research community and to potential users the possibility to evaluate with an objective metric the real performance gain resulting from any proposed configuration.

[1]  Yun Jiang,et al.  Towards fully distributed amplification and high-performance long-range distributed sensing based on random fiber laser , 2012, Other Conferences.

[2]  Anthony W. Brown,et al.  Characterization of the Brillouin-loss spectrum of single-mode fibers by use of very short (<10-ns) pulses. , 1999, Optics letters.

[3]  X. Bao,et al.  32-km distributed temperature sensor based on Brillouin loss in an optical fiber. , 1993, Optics letters.

[4]  Yongkang Dong,et al.  Extending the Sensing Range of Brillouin Optical Time-Domain Analysis Combining Frequency-Division Multiplexing and In-Line EDFAs , 2012, Journal of Lightwave Technology.

[5]  David J. Webb,et al.  25 km Brillouin based single-ended distributed fibre sensor for threshold detection of temperature or strain , 1999 .

[6]  Xiaoyi Bao,et al.  System optimization of a long-range Brillouin-loss-based distributed fiber sensor. , 2010, Applied optics.

[7]  Fabrizio Di Pasquale,et al.  Optimization of long-range BOTDA sensors with high resolution using first-order bi-directional Raman amplification. , 2011, Optics express.

[8]  Chao Zhang,et al.  Experimental Demonstration on 2.5-m Spatial Resolution and 1 $^{\circ}$C Temperature Uncertainty Over Long-Distance BOTDA With Combined Raman Amplification and Optical Pulse Coding , 2011, IEEE Photonics Technology Letters.

[9]  Han Wu,et al.  Distributed Raman amplification using ultra-long fiber laser with a ring cavity: characteristics and sensing application. , 2013, Optics express.

[10]  Xiaoyi Bao,et al.  Time-division multiplexing-based BOTDA over 100 km sensing length. , 2011, Optics letters.

[11]  G. Bolognini,et al.  Long-range simplex-coded BOTDA sensor over 120 km distance employing optical preamplification. , 2011, Optics letters.

[12]  Luc Thévenaz,et al.  Novel schemes for optical signal generation using laser injection locking with application to Brillouin sensing , 2004 .

[13]  S. Martín-López,et al.  Brillouin optical time-domain analysis assisted by second-order Raman amplification. , 2010, Optics Express.

[14]  S. Martin-Lopez,et al.  Raman-Assisted Brillouin Distributed Temperature Sensor Over 100 km Featuring 2 m Resolution and 1.2 $^{\circ}$C Uncertainty , 2012, Journal of Lightwave Technology.

[15]  K. Shimizu,et al.  Development of a distributed sensing technique using Brillouin scattering , 1995 .

[16]  Fabrizio Di Pasquale,et al.  Analysis of pulse modulation format in coded BOTDA sensors. , 2010, Optics express.

[17]  M. Lopez-Amo,et al.  A High-Performance Optical Time-Domain Brillouin Distributed Fiber Sensor , 2008, IEEE Sensors Journal.

[18]  X. Bao,et al.  Differential pulse-width pair BOTDA for high spatial resolution sensing. , 2008, Optics express.

[19]  Jian Wu,et al.  Theoretical and experimental investigation of an 82-km-long distributed Brillouin fiber sensor based on double sideband modulated probe wave , 2012 .

[20]  Yongkang Dong,et al.  Differential Brillouin gain for improving the temperature accuracy and spatial resolution in a long-distance distributed fiber sensor. , 2009, Applied optics.

[21]  Moshe Tur,et al.  Distributed Brillouin sensing with sub-meter spatial resolution: modeling and processing. , 2011, Optics express.

[22]  Sébastien Le Floch,et al.  Time/frequency coding for Brillouin distributed sensors , 2012, Other Conferences.

[23]  Anthony W. Brown,et al.  Dark-Pulse Brillouin Optical Time-Domain Sensor With 20-mm Spatial Resolution , 2007, Journal of Lightwave Technology.

[24]  X. Bao,et al.  High-resolution DPP-BOTDA over 50 km LEAF using return-to-zero coded pulses. , 2010, Optics letters.

[25]  Kazuo Hotate,et al.  Measurement of Brillouin Gain Spectrum Distribution along an Optical Fiber Using a Correlation-Based Technique : Proposal, Experiment and Simulation (Special Issue on Optical Fiber Sensors) , 2000 .

[26]  Han Wu,et al.  Hybrid distributed Raman amplification combining random fiber laser based 2nd-order and low-noise LD based 1st-order pumping. , 2013, Optics express.

[27]  Sébastien Le Floch,et al.  Colour simplex coding for brillouin distributed sensors , 2013, Other Conferences.

[28]  Sébastien Le Floch,et al.  Bipolar Optical Pulse Coding for Performance Enhancement in Botda Sensors References and Links , 2022 .

[29]  Luc Thévenaz,et al.  Effect of pulse depletion in a Brillouin optical time-domain analysis system. , 2013, Optics express.

[30]  Trevor P. Newson,et al.  150-km-range distributed temperature sensor based on coherent detection of spontaneous Brillouin backscatter and in-line Raman amplification , 2005 .

[31]  Marcelo A. Soto,et al.  Study of Raman amplification in DPP-BOTDA sensing employing Simplex coding for sub-meter scale spatial resolution over long fiber distances , 2013 .

[32]  Yongkang Dong,et al.  2 cm spatial-resolution and 2 km range Brillouin optical fiber sensor using a transient differential pulse pair. , 2012, Applied optics.

[33]  L. Thévenaz,et al.  Simplex-coded BOTDA fiber sensor with 1 m spatial resolution over a 50 km range. , 2010, Optics Letters.

[34]  Pedro Corredera,et al.  Distributed Brillouin Fiber Sensor Assisted by First-Order Raman Amplification , 2010, Journal of Lightwave Technology.

[35]  Fabrizio Di Pasquale,et al.  Optimization of a Dpp-botda Sensor with 25 Cm Spatial Resolution over 60 Km Standard Single-mode Fiber Using Simplex Codes and Optical Pre-amplification References and Links High Spatial Resolution and Long-distance Botda Using Differential Brillouin Gain in A , 2022 .

[36]  Nicol A. Heron,et al.  Experimental and theoretical studies on a distributed temperature sensor based on Brillouin scattering , 1995 .

[37]  Luc Thevenaz,et al.  Time-Domain Distributed Fiber Sensor With 1 cm Spatial Resolution Based on Brillouin Dynamic Grating , 2010, Journal of Lightwave Technology.

[38]  Luc Thevenaz,et al.  Applications of distributed Brillouin fiber sensing , 1998, Other Conferences.

[39]  Luc Thévenaz,et al.  High Spatial and Spectral Resolution Long-Range Sensing Using Brillouin Echoes , 2011 .

[40]  Luc Thévenaz,et al.  Impact of Raman scattering and modulation instability on the performances of Brillouin sensors , 2011, International Conference on Optical Fibre Sensors.

[41]  P. H. Richter.  Estimating errors in least-squares fitting , 1995 .

[42]  S. Martín-López,et al.  Extending the Real Remoteness of Long-Range Brillouin Optical Time-Domain Fiber Analyzers , 2014, Journal of Lightwave Technology.

[43]  Junhui Hu,et al.  A BOTDA with break interrogation function over 72 km sensing length. , 2013, Optics express.

[44]  X. Bao,et al.  22-km distributed temperature sensor using Brillouin gain in an optical fiber. , 1993, Optics letters.

[45]  S. Martín-López,et al.  Raman-assisted Brillouin optical time-domain analysis with sub-meter resolution over 100 km. , 2012, Optics express.

[46]  G. Bolognini,et al.  Simplex-Coded BOTDA Sensor Over 120-km SMF With 1-m Spatial Resolution Assisted by Optimized Bidirectional Raman Amplification , 2012, IEEE Photonics Technology Letters.