Producing Smart Pareto Sets for Multi-objective Topology Optimisation Problems

To date the design of structures via topology optimisation methods has mainly focused on single-objective problems. However, real-world design problems usually involve several different objectives, most of which counteract each other. Therefore, designers typically seek a set of Pareto optimal solutions, a solution for which no other solution is better in all objectives, which capture the trade-off between these objectives. This set is known as a smart Pareto set. Currently, only the weighted sums method has been used for generating Pareto fronts with topology optimisation methods. However, the weighted sums method is unable to produce evenly distributed smart Pareto sets. Furthermore, evenly distributed weights have been shown to not produce evenly spaced solutions. Therefore, the weighted sums method is not suitable for generating smart Pareto sets. Recently, the smart normal constraints method has been shown to be capable of directly generating smart Pareto sets. This work presents an updated smart normal constraint method, which is combined with a bi-directional evolutionary structural optimisation algorithm for multi-objective topology optimisation. The smart normal constraints method has been modified by further restricting the feasible design space for each optimisation run such that dominant and redundant points are not found. The algorithm is tested on several different structural optimisation problems. A number of different structural objectives are analysed, namely compliance, dynamic and buckling objectives. Therefore, the method is shown to be capable of solving various types of multi-objective structural optimisation problems. The goal of this work is to show that smart Pareto sets can be produced for complex topology optimisation problems. Furthermore, this research hopes to highlight the gap in the literature of topology optimisation for multi-objective problems.

[1]  A. Messac,et al.  The normalized normal constraint method for generating the Pareto frontier , 2003 .

[2]  M. Zhou,et al.  Generalized shape optimization without homogenization , 1992 .

[3]  Y. Xie,et al.  Multicriterion Evolutionary Structural Optimization Using the Weighting and the Global Criterion Methods , 2001 .

[4]  R. Marler,et al.  The weighted sum method for multi-objective optimization: new insights , 2010 .

[5]  Christopher A. Mattson,et al.  The smart normal constraint method for directly generating a smart Pareto set , 2013, Structural and Multidisciplinary Optimization.

[6]  A. Messac,et al.  Smart Pareto filter: obtaining a minimal representation of multiobjective design space , 2004 .

[7]  Antonio J. Nebro,et al.  A survey of multi-objective metaheuristics applied to structural optimization , 2014 .

[8]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[9]  Yi Min Xie,et al.  Evolutionary Topology Optimization of Structures with Multiple Displacement and Frequency Constraints , 2012 .

[10]  Takayuki Yamada,et al.  Pareto frontier exploration in multiobjective topology optimization using adaptive weighting and point selection schemes , 2017 .

[11]  M. Bendsøe,et al.  Topology Optimization: "Theory, Methods, And Applications" , 2011 .

[12]  Gareth A. Vio,et al.  Multiobjective and multi-physics topology optimization using an updated smart normal constraint bi-directional evolutionary structural optimization method , 2018 .

[13]  Ole Sigmund,et al.  Design of multiphysics actuators using topology optimization - Part I: One-material structures , 2001 .

[14]  Niels Olhoff,et al.  Topology optimization of continuum structures: A review* , 2001 .

[15]  O. Sigmund,et al.  Topology optimization approaches , 2013, Structural and Multidisciplinary Optimization.

[16]  Federico Rotini,et al.  Multi-objective topology optimization through GA-based hybridization of partial solutions , 2012, Engineering with Computers.

[17]  George I. N. Rozvany,et al.  A critical review of established methods of structural topology optimization , 2009 .

[18]  Qing Li,et al.  Evolutionary topology and shape design for general physical field problems , 2000 .

[19]  Kalyanmoy Deb,et al.  A fast and elitist multiobjective genetic algorithm: NSGA-II , 2002, IEEE Trans. Evol. Comput..

[20]  Kang Tai,et al.  Target-matching test problem for multiobjective topology optimization using genetic algorithms , 2007 .

[21]  Krister Svanberg,et al.  Optimization of geometry in truss design , 1981 .

[22]  Glynn J. Sundararaj,et al.  Ability of Objective Functions to Generate Points on Nonconvex Pareto Frontiers , 2000 .

[23]  A. Michell.  LVIII. The limits of economy of material in frame-structures , 1904 .

[24]  A. Messac,et al.  Normal Constraint Method with Guarantee of Even Representation of Complete Pareto Frontier , 2004 .

[25]  Ramana V. Grandhi,et al.  Multiobjective Evolutionary Structural Optimization Using Combined Static/Dynamic Control Parameters , 2006 .

[26]  J. Dennis,et al.  A closer look at drawbacks of minimizing weighted sums of objectives for Pareto set generation in multicriteria optimization problems , 1997 .

[27]  O. Pironneau.  Optimal Shape Design for Elliptic Systems , 1983 .

[28]  George I. N. Rozvany,et al.  Topology optimization in structural and continuum mechanics , 2014 .

[29]  William Prager,et al.  A note on discretized michell structures , 1974 .

[30]  Ramana V. Grandhi,et al.  A survey of structural and multidisciplinary continuum topology optimization: post 2000 , 2014 .

[31]  H. Rodrigues,et al.  Multiobjective topology optimization of structures using genetic algorithms with chromosome repairing , 2006 .

[32]  Takayuki Yamada,et al.  Multiobjective optimization using an aggregative gradient-based method , 2015 .

[33]  Hyunjoong Kim,et al.  Functional Analysis I , 2017 .

[34]  G.I.N. Rozvany,et al.  OPTIMIZATION OF STRUCTURAL GEOMETRY , 1977 .

[35]  M. Y. Wang,et al.  An enhanced genetic algorithm for structural topology optimization , 2006 .

[36]  G. Steven,et al.  Topology and shape optimization methods using evolutionary algorithms: a review , 2015 .

[37]  Ponnuthurai Nagaratnam Suganthan,et al.  Two-lbests based multi-objective particle swarm optimizer , 2011 .

[38]  Lotfi A. Zadeh,et al.  Optimality and non-scalar-valued performance criteria , 1963 .

[39]  George A. Gazonas,et al.  Multiobjective topology optimization of energy absorbing materials , 2014, Structural and Multidisciplinary Optimization.

[40]  Y. Xie,et al.  A simple evolutionary procedure for structural optimization , 1993 .

[41]  L. Lasdon,et al.  On a bicriterion formation of the problems of integrated system identification and system optimization , 1971 .

[42]  Takayuki Yamada,et al.  Gradient-based multiobjective optimization using a distance constraint technique and point replacement , 2016 .

[43]  Y. Xie,et al.  Stiffness and inertia multicriteria evolutionary structural optimisation , 2001 .

[44]  Y. Xie,et al.  Bidirectional Evolutionary Method for Stiffness Optimization , 1999 .

[45]  M. Bendsøe.  Optimal shape design as a material distribution problem , 1989 .