Reliability assessment of ageing distribution cable for replacement in 'smart' distribution systems

...................................................................................................................... 14 Chapter one ................................................................................................................ 22 Introduction ................................................................................................................ 22 1 Power system reliability studies ...................................................................... 22 1.1 Distribution network reliability ................................................................. 24 1.2 Reliability evaluation methods .................................................................. 26 1.3 Monte Carlo simulation (MCS) ................................................................. 28 1.4 Research motivation .................................................................................. 33 1.5 Research question ...................................................................................... 35 1.6 Research aim and objectives ..................................................................... 35 1.7 Contributions ............................................................................................. 37 1.8 Thesis structure .......................................................................................... 38 Chapter two ................................................................................................................ 42 Thermal modelling of ageing cables ......................................................................... 42 2 Modelling of ageing cables .............................................................................. 42

[1]  I. Drezga,et al.  A heuristic nonlinear constructive method for distribution system reconfiguration , 1999 .

[2]  George J. Anders,et al.  Risk-based planner for asset management [of electric utilities] , 2001 .

[3]  Alexander V. Gorpinich,et al.  Combination of capacitor placement and reconfiguration for loss reduction in distribution systems using selective PSO , 2013 .

[4]  Olimpo Anaya-Lara,et al.  Wind Power Integration: Connection and system operational aspects , 2007 .

[5]  Emil Johansson,et al.  Overview of Power System Reliability Assessment Techniques , 2011 .

[6]  Chung-Fu Chang,et al.  Reconfiguration and Capacitor Placement for Loss Reduction of Distribution Systems by Ant Colony Search Algorithm , 2008, IEEE Transactions on Power Systems.

[7]  Peng Wang,et al.  Repairable systems reliability trend tests and evaluation , 2005, Annual Reliability and Maintainability Symposium, 2005. Proceedings..

[8]  Reuven Y. Rubinstein,et al.  Simulation and the Monte Carlo method , 1981, Wiley series in probability and mathematical statistics.

[9]  Wenyuan Li,et al.  Power system equipment aging , 2006, IEEE Power and Energy Magazine.

[10]  A. J. Collin,et al.  Impact of DG and energy storage on distribution network reliability: A comparative analysis , 2012, 2012 IEEE International Energy Conference and Exhibition (ENERGYCON).

[11]  Selma Khalid Elhaj Awadallah Probabilistic Methodology for Prioritising Replacement of Ageing Power Transformers Based on Reliability Assessment of Transmission System , 2014 .

[12]  W. Li,et al.  Incorporating Aging Failures in Power System Reliability Evaluation , 2002, IEEE Power Engineering Review.

[13]  Gerald Thomas Heydt,et al.  The Next Generation of Power Distribution Systems , 2010, IEEE Transactions on Smart Grid.

[14]  Kyung-Bin Song,et al.  Time-varying failure rate extraction in electric power distribution equipment , 2006, 2006 International Conference on Probabilistic Methods Applied to Power Systems.

[15]  Ehab F. El-Saadany,et al.  DG allocation for benefit maximization in distribution networks , 2013, IEEE Transactions on Power Systems.

[16]  Gerd Balzer,et al.  Ageing of the system - impact on planning , 2000 .

[17]  Ronald N. Allan,et al.  Bibliography on the Application of Probability Methods in Power System Reliability Evaluation 1996-1999 , 1984 .

[18]  A. Keane,et al.  Optimal distributed generation plant mix with novel loss adjustment factors , 2006, 2006 IEEE Power Engineering Society General Meeting.

[19]  W. El-khattam,et al.  Optimal investment planning for distributed generation in a competitive electricity market , 2004, IEEE Transactions on Power Systems.

[20]  M. J. Rider,et al.  Imposing Radiality Constraints in Distribution System Optimization Problems , 2012, IEEE Transactions on Power Systems.

[21]  R.E. Brown,et al.  Failure rate modeling using equipment inspection data , 2004, IEEE Transactions on Power Systems.

[22]  Larry H. Crow,et al.  Evaluating the reliability of repairable systems , 1990, Annual Proceedings on Reliability and Maintainability Symposium.

[23]  Fangxing Li Distributed processing of reliability index assessment and reliability-based network reconfiguration in power distribution systems , 2005, IEEE Transactions on Power Systems.

[24]  Carmen L. T. Borges,et al.  Optimal distributed generation allocation for reliability, losses, and voltage improvement , 2006 .

[25]  Ross MacKinlay Managing an aging underground high-voltage cable network , 1990 .

[26]  Piet M. T. Broersen,et al.  Automatic Autocorrelation and Spectral Analysis , 2006 .

[27]  Wenyuan Li Risk assessment of power systems , 2014 .

[28]  Paul Giorsetto,et al.  Development of a New Procedure for Reliability Modeling of Wind Turbine Generators , 1983, IEEE Transactions on Power Apparatus and Systems.

[29]  K. Kopsidas,et al.  Risk assessment of smart energy transfer in distribution networks , 2014, IEEE PES Innovative Smart Grid Technologies, Europe.

[30]  R. Billinton,et al.  Incorporating Wind Power in Generating Capacity Reliability Evaluation Using Different Models , 2011, IEEE Transactions on Power Systems.

[31]  C. H. Lo,et al.  Economic dispatch and optimal sizing of battery energy storage systems in utility load-leveling operations , 1999 .

[32]  S. Carneiro,et al.  A New Distribution System Reconfiguration Approach Using Optimum Power Flow and Sensitivity Analysis for Loss Reduction , 2006, IEEE Transactions on Power Systems.

[33]  Sasa Z. Djokic,et al.  Reliability Planning of Active Distribution Systems Incorporating Regulator Requirements and Network-Reliability Equivalents , 2016 .

[34]  Rung-Fang Chang,et al.  Distributed Generation Interconnection Planning: A Wind Power Case Study , 2011, IEEE Transactions on Smart Grid.

[35]  Kjetil Uhlen,et al.  An overview of the present grid codes for integration of distributed generation , 2012 .

[36]  Awad M. Eldurssi,et al.  A Fast Nondominated Sorting Guided Genetic Algorithm for Multi-Objective Power Distribution System Reconfiguration Problem , 2015, IEEE Transactions on Power Systems.

[37]  W. H. Wellssow,et al.  Reliability calculation of MV-distribution networks with regard to ageing in XLPE-insulated cables , 2001 .

[38]  Yuan-Kang Wu,et al.  Study of Reconfiguration for the Distribution System With Distributed Generators , 2010, IEEE Transactions on Power Delivery.

[39]  Richard E. Brown,et al.  Electric Power Distribution Reliability , 2002 .

[40]  M. Blanchard,et al.  Generation of autocorrelated wind speeds for wind energy conversion system studies , 1984 .

[41]  Victor Levi,et al.  Expansion planning of medium voltage distribution networks , 2015, 2015 50th International Universities Power Engineering Conference (UPEC).

[42]  Hua Chen,et al.  A sequential simulation technique for adequacy evaluation of generating systems including wind energy , 1996 .

[43]  Ludvig Lindström EVALUATING IMPACT ON AMPACITY ACCORDING TO IEC-60287 REGARDING THERMALLY UNFAVOURABLE PLACEMENT OF POWER CABLES , 2011 .

[44]  Jing Shi,et al.  On comparing three artificial neural networks for wind speed forecasting , 2010 .

[45]  E. Atkinson Power Cable Rating Calculations— A Historical Perspective , 2015 .

[46]  Charles J. Mozina Impact of smart grid and green power generation on distribution systems , 2012, 2012 IEEE PES Innovative Smart Grid Technologies (ISGT).

[47]  Wenyuan Li,et al.  Risk Assessment Of Power Systems: Models, Methods, and Applications , 2004 .

[48]  S.B. Dalal,et al.  Aging of distribution cables in service and its simulation in the laboratory , 2005, IEEE Transactions on Dielectrics and Electrical Insulation.

[49]  K. Ravindra,et al.  Power Loss Minimization in Distribution System Using Network Reconfiguration in the Presence of Distributed Generation , 2013, IEEE Transactions on Power Systems.

[50]  E. Brancato,et al.  Insulation Aging a Historical and Critical Review , 1978, IEEE Transactions on Electrical Insulation.

[51]  B. Venkatesh,et al.  Optimal reconfiguration of radial distribution systems to maximize loadability , 2004, IEEE Transactions on Power Systems.

[52]  Muhammad Buhari,et al.  Probabilistic assessment of impacts of real-time line ratings on distribution networks , 2014, 2014 International Conference on Probabilistic Methods Applied to Power Systems (PMAPS).

[53]  Roy Billinton,et al.  Determination of reliability worth for distribution system planning , 1994 .

[54]  A. Rezaee Jordehi,et al.  Optimisation of electric distribution systems: A review , 2015 .

[55]  Luis F. Ochoa,et al.  Assessing the Potential of Network Reconfiguration to Improve Distributed Generation Hosting Capacity in Active Distribution Systems , 2015, IEEE Transactions on Power Systems.

[56]  Roy Billinton,et al.  Reliability evaluation of power systems , 1984 .

[57]  Wei Xu,et al.  Nonparametric regression-based failure rate model for electric power equipment using lifecycle data , 2015, 2016 IEEE/PES Transmission and Distribution Conference and Exposition (T&D).

[58]  Arnold Tustin,et al.  The Aging Process in Electrical Insulation: A Tutorial Summary , 1972, IEEE Transactions on Electrical Insulation.

[59]  George J. Anders,et al.  Application of continuous probabilistic networks to leak detection in pipe-type cable installations , 2010, 2010 IEEE 11th International Conference on Probabilistic Methods Applied to Power Systems.

[60]  R. S. Olsen,et al.  Dynamic temperature estimation and real time emergency rating of transmission cables , 2012, 2012 IEEE Power and Energy Society General Meeting.

[61]  D. Shirmohammadi,et al.  Reconfiguration of electric distribution networks for resistive line losses reduction , 1989 .

[62]  Sang-Yun Yun,et al.  Reliability evaluation of distribution system through the analysis of time-varying failure rate , 2004, IEEE Power Engineering Society General Meeting, 2004..

[63]  Nikos D. Hatziargyriou,et al.  Optimal Distributed Generation Placement in Power Distribution Networks : Models , Methods , and Future Research , 2013 .

[64]  Mohd Hasan Ali,et al.  Simultaneous Reconfiguration, Optimal Placement of DSTATCOM, and Photovoltaic Array in a Distribution System Based on Fuzzy-ACO Approach , 2015, IEEE Transactions on Sustainable Energy.

[65]  D.M. Falcao,et al.  Modeling reliability aspects of distributed generation connected to distribution systems , 2006, 2006 IEEE Power Engineering Society General Meeting.

[66]  Ying Qu,et al.  Four-Dimensional Wind Speed Model for Adequacy Assessment of Power Systems With Wind Farms , 2013, IEEE Transactions on Power Systems.

[67]  Chanan Singh,et al.  Detection of ageing in the reliability analysis of thermal generators , 1988 .

[68]  Joao P. S. Catalao,et al.  Multi-Objective Reconfiguration of Radial Distribution Systems Using Reliability Indices , 2016, IEEE Transactions on Power Systems.

[69]  Fei Ding,et al.  Feeder reconfiguration for unbalanced distribution systems with distributed generation: a hierarchical decentralized approach , 2016, 2016 IEEE Power and Energy Society General Meeting (PESGM).

[70]  G. F. Moore,et al.  Electric Cables Handbook , 1997 .

[71]  E.F. El-Saadany,et al.  Optimal Renewable Resources Mix for Distribution System Energy Loss Minimization , 2010, IEEE Transactions on Power Systems.

[72]  Konstantinos Kopsidas,et al.  Network planning evaluation implementing time varying thermal ratings , 2014, 2014 International Conference on Probabilistic Methods Applied to Power Systems (PMAPS).

[73]  G.J. Anders,et al.  Effects of Backfilling on Cable Ampacity Analyzed With the Finite Element Method , 2008, IEEE Transactions on Power Delivery.

[74]  Anatoly Lisnianski,et al.  Recent Advances in System Reliability: Signatures, Multi-state Systems and Statistical Inference , 2003 .

[75]  J. Contreras,et al.  Distribution System Planning With Reliability , 2011, IEEE Transactions on Power Delivery.

[76]  R. V. Rebbapragada,et al.  Failure prediction of underground distribution feeder cables , 1994 .

[77]  Ramsha Sajjad Abbasi,et al.  Feeder reconfiguration techniques: A review , 2014, 2014 International Conference on Energy Systems and Policies (ICESP).

[78]  M. S. Thomas,et al.  Interconnection issues for distributed resources in a smart distribution system , 2012, 2012 IEEE 5th India International Conference on Power Electronics (IICPE).

[79]  Nurulafiqah Nadzirah Mansor,et al.  Development of distribution networks with low carbon technologies , 2015, 2015 IEEE Innovative Smart Grid Technologies - Asia (ISGT ASIA).

[80]  E. W. C. Wilkins,et al.  Cumulative damage in fatigue , 1956 .

[81]  Muhammad Buhari,et al.  Modelling of Ageing Distribution Cable for Replacement Planning , 2016, IEEE Transactions on Power Systems.

[82]  Horst Rinne,et al.  The Weibull Distribution: A Handbook , 2008 .

[83]  M. H. McGrath,et al.  The calculation of the temperature rise and load capability of cable systems , 1957, Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems.

[84]  R. E. Brown,et al.  Analyzing the reliability impact of distributed generation , 2001, 2001 Power Engineering Society Summer Meeting. Conference Proceedings (Cat. No.01CH37262).

[85]  Nikos D. Hatziargyriou,et al.  A review of power distribution planning in the modern power systems era: Models, methods and future research , 2015 .

[86]  Roy Billinton,et al.  Composite system reliability assessment using a Monte Carlo approach , 1991 .

[87]  Richard Brown,et al.  Electric Power Distribution Reliability, Second Edition , 2008 .

[88]  Felix F. Wu,et al.  Network Reconfiguration in Distribution Systems for Loss Reduction and Load Balancing , 1989, IEEE Power Engineering Review.

[89]  Emilio Ghiani,et al.  Reliability assessment in smart distribution networks , 2013 .

[90]  Roy Billinton,et al.  Power system reliability and its assessment. III. Distribution systems and economic considerations , 1993 .

[91]  M. E. Baran,et al.  Optimal capacitor placement on radial distribution systems , 1989 .

[92]  Sanjay Mehrotra,et al.  Robust Distribution Network Reconfiguration , 2015, IEEE Transactions on Smart Grid.

[93]  D J Swaffield,et al.  Rating methods for cables installed in unventilated and partially ventilated surface troughs , 2011, 2011 Electrical Insulation Conference (EIC)..

[94]  R. Billinton,et al.  Time-series models for reliability evaluation of power systems including wind energy , 1996 .

[95]  G. Mazzanti,et al.  The combination of electro-thermal stress, load cycling and thermal transients and its effects on the life of high voltage ac cables , 2009, IEEE Transactions on Dielectrics and Electrical Insulation.

[96]  A.M.L. da Silva,et al.  Chronological Monte Carlo-Based Assessment of Distribution System Reliability , 2006, 2006 International Conference on Probabilistic Methods Applied to Power Systems.

[97]  S. K. Basu,et al.  A new algorithm for the reconfiguration of distribution feeders for loss minimization , 1992 .

[98]  R.W. Dunn,et al.  Spatially Correlated Wind Speed Modelling for Generation Adequacy Studies in the UK , 2007, 2007 IEEE Power Engineering Society General Meeting.

[99]  C. Singh,et al.  Reliability Modeling and Simulation in Power Systems With Aging Characteristics , 2010, IEEE Transactions on Power Systems.

[100]  Luis F. Ochoa,et al.  State-of-the-Art Techniques and Challenges Ahead for Distributed Generation Planning and Optimization , 2013, IEEE Transactions on Power Systems.

[101]  Roy Billinton,et al.  Reliability evaluation of engineering systems : concepts and techniques , 1992 .

[102]  R. Samm,et al.  Worldwide underground distribution cable practices , 1999, 1999 IEEE Transmission and Distribution Conference (Cat. No. 99CH36333).

[103]  Wenyuan Li,et al.  Power System Risk Assessment Using a Hybrid Method of Fuzzy Set and Monte Carlo Simulation , 2008, IEEE Transactions on Power Systems.

[104]  Jianzhong Wu,et al.  An Overview of the Smart Grid in Great Britain , 2015 .

[105]  D.V. Nicolae,et al.  Reconfiguration and Load Balancing in the LV and MV Distribution Networks for Optimal Performance , 2007, IEEE Transactions on Power Delivery.

[106]  Jizhong Zhu,et al.  Optimization of Power System Operation , 2009 .

[107]  H. S. Endicott,et al.  Comments on "Application of the Eyring Model to Capacitor Aging Data" , 1962 .

[108]  Song-Bo Liu Calculation of the Steady-State and Transient Temperature Rises of Round Cable Bundles , 2010, IEEE Transactions on Power Delivery.

[109]  Luis Ochoa,et al.  Minimizing Energy Losses: Optimal Accommodation and Smart Operation of Renewable Distributed Generation , 2011, IEEE Transactions on Power Systems.

[110]  Ushio Sumita,et al.  A USEFUL GENERALIZATION OF RENEWAL THEORY: COUNTING PROCESSES GOVERNED BY NON-NEGATIVE MARKOVIAN INCREMENTS , 1986 .

[111]  John Dagpunar,et al.  Simulation and Monte Carlo , 2007 .

[112]  Zhang Yan,et al.  A review on the forecasting of wind speed and generated power , 2009 .

[113]  Roy Billinton,et al.  An integrated approach to power system reliability assessment , 1995 .

[114]  M. R. Yenchek,et al.  The impact of current load on mine-trailing cable thermal life , 1993 .

[115]  Mohammad Shahidehpour,et al.  The IEEE Reliability Test System-1996. A report prepared by the Reliability Test System Task Force of the Application of Probability Methods Subcommittee , 1999 .

[116]  Dheeraj Kumar Khatod,et al.  Analytical approach for optimal siting and sizing of distributed generation in radial distribution networks , 2015 .

[117]  G. Mazzanti,et al.  Analysis of the Combined Effects of Load Cycling, Thermal Transients, and Electrothermal Stress on Life Expectancy of High-Voltage AC Cables , 2007, IEEE Transactions on Power Delivery.

[118]  S. Low,et al.  Feeder Reconfiguration in Distribution Networks Based on Convex Relaxation of OPF , 2015, IEEE Transactions on Power Systems.

[119]  R. Billinton,et al.  Considering load-carrying capability and wind speed correlation of WECS in generation adequacy assessment , 2006, IEEE Transactions on Energy Conversion.

[120]  R. Billinton,et al.  Adequacy Assessment Considerations in Wind Integrated Power Systems , 2012, IEEE Transactions on Power Systems.

[121]  H Lee Willis,et al.  Aging Power Delivery Infrastructures , 2000 .

[122]  Jovica V. Milanovic,et al.  The Influence of Modeling Transformer Age Related Failures on System Reliability , 2015, IEEE Transactions on Power Systems.

[123]  George J. Anders,et al.  Calculations of power cable load capability on a desktop computer: a review , 1986 .

[124]  Taher Niknam,et al.  Optimal Distribution Feeder Reconfiguration for Reliability Improvement Considering Uncertainty , 2014, IEEE Transactions on Power Delivery.

[125]  Roy Billinton,et al.  Basic Power System Reliability Concepts , 1990 .

[126]  G. J. Anders,et al.  Modelling of Dynamic Transmission Cable Temperature Considering Soil-Specific Heat, Thermal Resistivity, and Precipitation , 2013, IEEE Transactions on Power Delivery.

[127]  Goran Strbac,et al.  Co-Optimization of Generation Expansion Planning and Electric Vehicles Flexibility , 2016, IEEE Transactions on Smart Grid.

[128]  Wenyuan Li,et al.  Analytical model for unavailability due to aging failures in power systems , 2009 .

[129]  Chanan Singh,et al.  Adequacy and economy analysis of distribution systems integrated with Electric Energy Storage and Renewable Energy Resources , 2013, 2013 IEEE Power & Energy Society General Meeting.

[130]  V. Miranda,et al.  Probabilistic Analysis for Maximizing the Grid Integration of Wind Power Generation , 2012, IEEE Transactions on Power Systems.

[131]  Roy Billinton,et al.  Reliability Assessment of Large Electric Power Systems , 1988 .

[132]  H Lee Willis,et al.  Understanding Electric Utilities and De-Regulation , 1998 .

[133]  William D'haeseleer,et al.  Critical evaluation of methods for wind-power appraisal , 2007 .

[134]  Wenxia Liu,et al.  Optimal Allocation of Switches in DG Enhanced Distribution Systems , 2011, 2011 Asia-Pacific Power and Energy Engineering Conference.

[135]  Roy Billinton,et al.  Large wind integrated bulk system reinforcement planning using the joint deterministic — Probabilistic method , 2011 .