Multi-Objective Accelerated Process Optimization of Part Geometric Accuracy in Additive Manufacturing

The goal of this work is to minimize geometric inaccuracies in parts printed using a fused filament fabrication (FFF) additive manufacturing (AM) process by optimizing the process parameters settings. This is a challenging proposition, because it is often difficult to satisfy the various specified geometric accuracy requirements by using the process parameters as the controlling factor. To overcome this challenge, the objective of this work is to develop and apply a multi-objective optimization approach to find the process parameters minimizing the overall geometric inaccuracies by balancing multiple requirements. The central hypothesis is that formulating such a multi-objective optimization problem as a series of simpler single-objective problems leads to optimal process conditions minimizing the overall geometric inaccuracy of AM parts with fewer trials compared to the traditional design of experiments (DOE) approaches. The proposed multi-objective accelerated process optimization (m-APO) method accelerates the optimization process by jointly solving the subproblems in a systematic manner. The m-APO maps and scales experimental data from previous subproblems to guide remaining subproblems that improve the solutions while reducing the number of experiments required. The presented hypothesis is tested with experimental data from the FFF AM process; the m-APO reduces the number of FFF trials by 20% for obtaining parts with the least geometric inaccuracies compared to full factorial DOE method. Furthermore, a series of studies conducted on synthetic responses affirmed the effectiveness of the proposed mAPO approach in more challenging scenarios evocative of large and nonconvex objective spaces. This outcome directly leads to minimization of expensive experimental trials in AM. [DOI: 10.1115/1.4037319]