Simultaneous control of the compass-gait biped to maintain symmetric gait across all mass ratios

It is known that the hybrid dynamical model of a compass-gait biped, which is used here to represent a patient using ankle-foot prostheses on both legs, exhibits a loss of stable period-one symmetric gait with increasing hip-to-leg mass ratio. For higher mass ratios, the period-one gait becomes unstable and bifurcates into a period-two asymmetric gait. In this work, the continuous-time single-support phase of the compass-gait biped is linearized about the upright position and simultaneously stabilized by a linear time-invariant controller that is simple, single-input single-output, and only second-order. This controller, when simulated with the underactuated nonlinear hybrid compass-gait biped model, is shown to maintain stable period-one symmetric gait across all physiologically meaningful mass distributions of the compass-gait biped.

[1]  Jonathon W. Sensinger,et al.  Experimental effective shape control of a powered transfemoral prosthesis , 2013, 2013 IEEE 13th International Conference on Rehabilitation Robotics (ICORR).

[2]  Jonathon W. Sensinger,et al.  Virtual Constraint Control of a Powered Prosthetic Leg: From Simulation to Experiments With Transfemoral Amputees , 2014, IEEE Transactions on Robotics.

[3]  Vincent D. Blondel,et al.  Simultaneous Stabilization Of Linear Systems , 1993 .

[4]  Eric Loth,et al.  A portable powered ankle-foot orthosis for rehabilitation. , 2011, Journal of rehabilitation research and development.

[5]  Nicholas P. Fey,et al.  Strategies to reduce the configuration time for a powered knee and ankle prosthesis across multiple ambulation modes , 2013, 2013 IEEE 13th International Conference on Rehabilitation Robotics (ICORR).

[6]  Kevin M. Lynch,et al.  The basic mechanics of bipedal walking lead to asymmetric behavior , 2011, 2011 IEEE International Conference on Rehabilitation Robotics.

[7]  Bernard Espiau,et al.  A Study of the Passive Gait of a Compass-Like Biped Robot , 1998, Int. J. Robotics Res..

[8]  Michael Goldfarb,et al.  Upslope Walking With a Powered Knee and Ankle Prosthesis: Initial Results With an Amputee Subject , 2011, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[9]  Mathukumalli Vidyasagar,et al.  Control System Synthesis: A Factorization Approach, Part I , 2011, Control System Synthesis Part I.

[10]  Xiaobing Shi [Comparative study on using TTCP and CTCP ceramic artificial bone for repairing segment defect of long bone]. , 2002, Sheng wu yi xue gong cheng xue za zhi = Journal of biomedical engineering = Shengwu yixue gongchengxue zazhi.

[11]  Tad McGeer,et al.  Passive Dynamic Walking , 1990, Int. J. Robotics Res..

[12]  Michael Goldfarb,et al.  Design and Control of a Powered Transfemoral Prosthesis , 2008, Int. J. Robotics Res..

[13]  Kevin M. Lynch,et al.  On the Mechanics of Functional Asymmetry in Bipedal Walking , 2012, IEEE Transactions on Biomedical Engineering.

[14]  Thomas Sugar,et al.  Design, implementation and test results of a robust control method for a powered ankle foot orthosis (AFO) , 2008, 2008 IEEE International Conference on Robotics and Automation.

[15]  Jonathan B Dingwell,et al.  Differences between local and orbital dynamic stability during human walking. , 2007, Journal of biomechanical engineering.

[16]  P. de Leva Adjustments to Zatsiorsky-Seluyanov's segment inertia parameters. , 1996, Journal of biomechanics.