PDMS Microcantilever-Based Flow Sensor Integration for Lab-on-a-Chip

In this paper, a simple practical method is presented to fabricate a high aspect ratio horizontal polydimethylsiloxane (PDMS) microcantilever-based flow sensor integrated into a microfluidic device. A multilayer soft lithography process is developed to fabricate a thin PDMS layer involving the PDMS microcantilever and the microfluidics network. A three-layer fabrication technique is explored for the integration of the microflow meter. The upper and lower PDMS layers are bonded to the thin layer to release the microcantilever for free deflection. A 3-D finite element analysis is carried out to simulate fluid-structure interaction and estimate cantilever deflection under various flow conditions. The dynamic range of flow rates that is detectable using the flow sensor is assessed by both simulation and experimental methods and compared. Limited by the accuracy of the 1.76- μm resolution of the image acquisition method, the present setup allows for flow rates as low as 35 μL/min to be detected. This is equal to 0.8-μN resolution in equivalent force at the tip. This flow meter can be integrated into any type of microfluidic-based lab-on-a-chip in which flow measurement is crucial, such as flow cytometry and particle separation applications.

[1]  M. Dijkstra,et al.  Miniaturized flow sensor with planar integrated sensor structures on semicircular surface channels , 2007, 2007 IEEE 20th International Conference on Micro Electro Mechanical Systems (MEMS).

[2]  Ami Chand,et al.  Piezoresistive cantilever based nanoflow and viscosity sensor for microchannels. , 2006, Lab on a chip.

[3]  Christopher S. Chen,et al.  Cells lying on a bed of microneedles: An approach to isolate mechanical force , 2003, Proceedings of the National Academy of Sciences of the United States of America.

[4]  David A. LaVan,et al.  Analysis of soft cantilevers as force transducers , 2007 .

[5]  L. Addadi,et al.  Force and focal adhesion assembly: a close relationship studied using elastic micropatterned substrates , 2001, Nature Cell Biology.

[6]  P. Sharma.  Mechanics of materials. , 2010, Technology and health care : official journal of the European Society for Engineering and Medicine.

[7]  Xin Zhang,et al.  Viscoelastic mechanical behavior of soft microcantilever-based force sensors , 2008 .

[8]  Ying Zhang,et al.  Replica molding of high-aspect-ratio polymeric nanopillar arrays with high fidelity. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[9]  L. Rodrigues,et al.  Poly(dimethyl siloxane) surface modification by low pressure plasma to improve its characteristics towards biomedical applications. , 2010, Colloids and surfaces. B, Biointerfaces.

[10]  Joo H. Kang,et al.  Fabrication of a poly(dimethylsiloxane) membrane with well-defined through-holes for three-dimensional microfluidic networks , 2009 .

[11]  C. Chiang,et al.  A MEMS-based Air Flow Sensor with a Free-standing Micro-cantilever Structure , 2007, Sensors.

[12]  Muthukumaran Packirisamy,et al.  Integrated biophotonic μTAS for flow cytometry and particle detection , 2009, Photonics North.

[13]  Ok Chan Jeong,et al.  Measurement of nonlinear mechanical properties of PDMS elastomer , 2011 .

[14]  G M Whitesides,et al.  Fabrication of topologically complex three-dimensional microfluidic systems in PDMS by rapid prototyping. , 2000, Analytical chemistry.

[15]  T. Akutsu,et al.  Non-wetted thermal micro flow sensor , 2007, SICE Annual Conference 2007.

[16]  Bradley J. Nelson,et al.  Vision-based force measurement , 2004, IEEE Transactions on Pattern Analysis and Machine Intelligence.

[17]  Michael L. Accorsi,et al.  Fluid-Structure Interactions of a Round Parachute: Modeling and Simulation Techniques , 2001 .

[18]  Marc Boillat,et al.  Polyimide membrane with ZnO piezoelectric thin film pressure transducers as a differential pressure liquid flow sensor , 2003 .

[19]  L.C.S. Nunes,et al.  Mechanical characterization of hyperelastic polydimethylsiloxane by simple shear test , 2011 .

[20]  P. Veltink,et al.  The mechanical properties of the rubber elastic polymer polydimethylsiloxane for sensor applications , 1997 .

[21]  M. Packirisamy,et al.  A new polydimethylsiloxane (PDMS) microcantilever with integrated optical waveguide for biosensing application , 2012, Other Conferences.

[22]  Quanfang Chen,et al.  Thickness-dependent mechanical properties of polydimethylsiloxane membranes , 2009 .

[23]  Frank Vollmer,et al.  Microfluidic flow rate detection based on integrated optical fiber cantilever. , 2007, Lab on a chip.

[24]  H. Wolf,et al.  High-resolution patterning and transfer of thin PDMS films: fabrication of hybrid self-sealing 3D microfluidic systems , 2004, 17th IEEE International Conference on Micro Electro Mechanical Systems. Maastricht MEMS 2004 Technical Digest.

[25]  Suresh V. Garimella,et al.  Hydrodynamic loading of microcantilevers vibrating in viscous fluids , 2006 .

[26]  Oliver Brock,et al.  NanoNewton Force Sensing and Control in Microrobotic Cell Manipulation , 2009 .

[27]  Yu-Hwa Lo,et al.  Human mammalian cell sorting using a highly integrated micro-fabricated fluorescence-activated cell sorter (microFACS). , 2010, Lab on a chip.

[28]  Walter Lang,et al.  Thermal flow sensor for liquids and gases based on combinations of two principles , 1999 .

[29]  F. M. Sasoglu,et al.  Design and microfabrication of a high-aspect-ratio PDMS microbeam array for parallel nanonewton force measurement and protein printing , 2007 .

[30]  Kartikeya Mayaram,et al.  Simulation and optimization of a microfluidic flow sensor , 2001 .