Hundred Drones Land in a Minute

Currently, drone research and development has received significant attention worldwide. Particularly, delivery services employ drones as it is a viable method to improve delivery efficiency by using a several unmanned drones. Research has been conducted to realize complete automation of drone control for such services. However, regarding the takeoff and landing port of the drones, conventional methods have focused on the landing operation of a single drone, and the continuous landing of multiple drones has not been realized. To address this issue, we propose a completely novel port system, "EAGLES Port," that allows several drones to continuously land and takeoff in a short time. Experiments verified that the landing time efficiency of the proposed port is ideally 7.5 times higher than that of conventional vertical landing systems. Moreover, the system can tolerate 270 mm of horizontal positional error, +-30 deg of angular error in the drone's approach (+-40 deg with the proposed gate mechanism), and up to 1.9 m/s of drone's approach speed. This technology significantly contributes to the scalability of drone usage. Therefore, it is critical for the development of a future drone port for the landing of automated drone swarms.

[1]  H. Harry Asada,et al.  The dynamic RCC hand for high-speed assembly , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[2]  Tohru Suzuki,et al.  Results of the ETS-7 Mission - Rendezvous Docking and Space Robotics Experiments , 1999 .

[3]  Gaurav S. Sukhatme,et al.  Visually guided landing of an unmanned aerial vehicle , 2003, IEEE Trans. Robotics Autom..

[4]  Harvey Lipkin,et al.  Design and Analysis of Remote Center of Compliance Structures , 2003, J. Field Robotics.

[5]  Roland Siegwart,et al.  Full control of a quadrotor , 2007, 2007 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[6]  Gray C. Thomas,et al.  A Perching Landing Gear for a Quadcopter , 2012 .

[7]  M. A. Minor,et al.  An Avian-Inspired Passive Mechanism for Quadrotor Perching , 2013, IEEE/ASME Transactions on Mechatronics.

[8]  Haibin Duan,et al.  Implementation of autonomous visual tracking and landing for a low-cost quadrotor , 2013 .

[9]  Dario Floreano,et al.  A perching mechanism for flying robots using a fibre-based adhesive , 2013, 2013 IEEE International Conference on Robotics and Automation.

[10]  Donald Ruffatto,et al.  Autonomous perching and take-off on vertical walls for a quadrotor micro air vehicle , 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA).

[11]  Scott P. Cryan,et al.  International Docking Standard (IDSS) Interface Definition Document (IDD) . E; Revision , 2016 .

[12]  Hilbert J. Kappen,et al.  Efficient Optical Flow and Stereo Vision for Velocity Estimation and Obstacle Avoidance on an Autonomous Pocket Drone , 2016, IEEE Robotics and Automation Letters.

[13]  Geoffrey C. Fox,et al.  Real-Time, Cloud-Based Object Detection for Unmanned Aerial Vehicles , 2017, 2017 First IEEE International Conference on Robotic Computing (IRC).

[14]  Sebastian Magierowski,et al.  Vehicle Routing Problems for Drone Delivery , 2016, IEEE Transactions on Systems, Man, and Cybernetics: Systems.

[15]  Erik G. Larsson,et al.  Massive MIMO for Communications With Drone Swarms , 2017, IEEE Transactions on Wireless Communications.

[16]  Halil Yetgin,et al.  Analysis and Optimization of Unmanned Aerial Vehicle Swarms in Logistics: An Intelligent Delivery Platform , 2019, IEEE Access.

[17]  Zlatan Krajina,et al.  The Routledge Companion to Urban Media and Communication , 2019 .