Reconfigurability and unified kinematics modeling of a 3rTPS metamorphic parallel mechanism with perpendicular constraint screws

This paper investigates reconfigurability and unified analytical kinematics analysis of a new 3rTPS metamorphic parallel mechanism consisting of three reconfigurable rTPS limbs in perpendicular base planes. Constraint screw systems show that in one phase the rTPS limb has no constraint to the platform and in the other phase obtained by altering the reconfigurable Hooke joint, it provides a constraint force. The two phases of the limb qualify the 3rTPS metamorphic parallel mechanism to have four topologies with ability of mobility change among 3R (three rotations), 3R1T (three rotations one translation), 3R2T and mobility 6. By considering the difference of the two phases of the limb, a unified kinematics modeling is proposed based on the actuation scheme analysis by taking one phase as a special case of the other. Following this, a unified kinematics modeling of the 3rTPS metamorphic parallel mechanism is obtained by covering all its four topologies. Both inverse and forward kinematics analysis are solved analytically and numerical examples confirm these theoretical results.

[1]  Pietro Fanghella,et al.  Parallel robots that change their group of motion , 2006, ARK.

[2]  C. Gosselin.  Determination of the Workspace of 6-DOF Parallel Manipulators , 1990 .

[3]  Jian S. Dai,et al.  Interrelationship between screw systems and corresponding reciprocal systems and applications , 2001 .

[4]  Q. C. Li,et al.  General Methodology for Type Synthesis of Symmetrical Lower-Mobility Parallel Manipulators and Several Novel Manipulators , 2002, Int. J. Robotics Res..

[5]  J. R. Jones,et al.  Matrix Representation of Topological Changes in Metamorphic Mechanisms , 2005 .

[6]  L. Tsai.  Solving the Inverse Dynamics of a Stewart-Gough Manipulator by the Principle of Virtual Work , 2000 .

[7]  Hieu Minh Trinh,et al.  Two-mode overconstrained three-DOFs rotational-translational linear-motor-based parallel-kinematics mechanism for machine tool applications , 2007, Robotica.

[8]  Zhen Huang,et al.  Kinematic characteristics analysis of 3 DOF in-parallel actuated pyramid mechanism☆ , 1996 .

[9]  Jinsong Wang,et al.  Closed Form Solution to Workspace of Hexapod-Based Virtual Axis Machine Tools , 1999 .

[10]  Jian S. Dai,et al.  Biological Modeling and Evolution Based Synthesis of Metamorphic Mechanisms , 2008 .

[11]  I-Ming Chen,et al.  Mechatronic Design and Locomotion of Amoebot - A Metamorphic Underwater Vehicle , 2003, J. Field Robotics.

[12]  C. Gosselin,et al.  Type Synthesis of Parallel Mechanisms With Multiple Operation Modes , 2007 .

[13]  Klaus Radermacher,et al.  CRIGOS: a compact robot for image-guided orthopedic surgery , 1999, IEEE Transactions on Information Technology in Biomedicine.

[14]  Jian S. Dai,et al.  Topology and Constraint Analysis of Phase Change in the Metamorphic Chain and Its Evolved Mechanism , 2010 .

[15]  C. Gosselin,et al.  Type Synthesis of 3-DOF Spherical Parallel Manipulators Based on Screw Theory , 2004 .

[16]  Jian S. Dai,et al.  Mobility Change in Two Types of Metamorphic Parallel Mechanisms , 2009 .

[17]  H. Lipkin,et al.  Mobility of Overconstrained Parallel Mechanisms , 2006 .

[18]  J. Dai,et al.  Mobility in Metamorphic Mechanisms of Foldable/Erectable Kinds , 1998 .

[19]  D. Caldwell,et al.  Geometry and Kinematic Analysis of a Redundantly Actuated Parallel Mechanism That Eliminates Singularities and Improves Dexterity , 2008 .

[20]  Feng Gao,et al.  Optimum design of 3-DOF spherical parallel manipulators with respect to the conditioning and stiffness indices , 2000 .

[21]  T. Huang,et al.  Conceptual design and dimensional synthesis for a 3-DOF module of the TriVariant-a novel 5-DOF reconfigurable hybrid robot , 2005, IEEE Transactions on Robotics.

[22]  Jian S. Dai,et al.  Constraint-Based Limb Synthesis and Mobility-Change-Aimed Mechanism Construction , 2011 .

[23]  Hong-Sen Yan,et al.  Topological Representations and Characteristics of Variable Kinematic Joints , 2006 .

[24]  Biennial Mechanisms,et al.  26th Biennial Mechanisms and Robotics Conference , 2000 .

[25]  Jadran Lenarčič,et al.  Advances in robot kinematics : analysis and design , 2008 .

[26]  Hong-Sen Yan,et al.  On the Mobility and Configuration Singularity of Mechanisms With Variable Topologies , 2007 .

[27]  Jean-Pierre Merlet,et al.  Parallel Robots , 2000 .

[28]  François Pierrot,et al.  Towards a fully-parallel 6 DOF robot for high-speed applications , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[29]  Jian S. Dai,et al.  A six-component contact force measurement device based on the Stewart platform , 2000 .

[30]  Q. Liao,et al.  Constraint analysis on mobility change of a novel metamorphic parallel mechanism , 2010 .

[31]  Jian S. Dai,et al.  Geometric analysis and synthesis of the metamorphic robotic hand , 2007 .

[32]  Jian S. Dai,et al.  Design and kinematics analysis of a new 3CCC parallel mechanism , 2010, Robotica.

[33]  D. Stewart.  A Platform with Six Degrees of Freedom , 1965 .

[34]  K. H. Hunt,et al.  Structural Kinematics of In-Parallel-Actuated Robot-Arms , 1983 .

[35]  Jian S. Dai,et al.  Forward displacement analysis of the general 6–6 Stewart mechanism using Gröbner bases , 2009 .