A Generalized MPC Framework for the Design and Comparison of VSI Current Controllers

Model predictive control (MPC) has been widely advocated as a design strategy for many aspects of industrial electronics. The methodology has been strongly promoted by some researchers but has also attracted criticism from others. In this context, the purpose of this paper is twofold. First, we show that many existing and popular control strategies, including finite set MPC and linear controllers [proportional integral, proportional resonant (PR)], can be viewed as special cases of MPC. Second, we show that the predictive control framework allows one to embellish these classical control architectures with novel features and to design new and advanced control architectures to address various challenges posed by power electronics applications. The findings of the paper are supported by a practical example of designing of a novel form of PR controller with superior tracking performance and delay compensation, confirmed via simulation and experiments.

[1]  Daniel E. Quevedo,et al.  Performance of Multistep Finite Control Set Model Predictive Control for Power Electronics , 2014, IEEE Transactions on Power Electronics.

[2]  José R. Espinoza,et al.  A Novel Hybrid Finite Control Set Model Predictive Control Scheme With Reduced Switching , 2013, IEEE Transactions on Industrial Electronics.

[3]  Cesar Silva,et al.  Delay Compensation in Model Predictive Current Control of a Three-Phase Inverter , 2012, IEEE Transactions on Industrial Electronics.

[4]  Galina Mirzaeva,et al.  Optimal design of VSI current controllers based on MPC approach , 2015, 2015 IEEE 24th International Symposium on Industrial Electronics (ISIE).

[5]  Marian P. Kazmierkowski,et al.  State of the Art of Finite Control Set Model Predictive Control in Power Electronics , 2013, IEEE Transactions on Industrial Informatics.

[6]  Jose Rodriguez,et al.  Predictive Control of a Three-Phase Inverter , 2012 .

[7]  Bin Wu,et al.  Model Predictive Approach for a Simple and Effective Load Voltage Control of Four-Leg Inverter With an Output $LC$ Filter , 2014, IEEE Transactions on Industrial Electronics.

[8]  D. G. Holmes,et al.  Optimized Design of Stationary Frame Three Phase AC Current Regulators , 2009, IEEE Transactions on Power Electronics.

[9]  Haitham Abu-Rub,et al.  Assessing Finite-Control-Set Model Predictive Control: A Comparison with a Linear Current Controller in Two-Level Voltage Source Inverters , 2014, IEEE Industrial Electronics Magazine.

[10]  Graham C. Goodwin,et al.  A combined model predictive control/space vector modulation (MPC-SVM) strategy for direct torque and flux control of induction motors , 2011, IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society.

[11]  José R. Rodríguez,et al.  Predictive Torque Control of Induction Machines Based on State-Space Models , 2009, IEEE Transactions on Industrial Electronics.

[12]  Eric Rogers International Journal of Control – 50th Anniversary Editorial , 2015, Int. J. Control.

[13]  Jonatan Roberto Fischer,et al.  Calculation-Delay Tolerant Predictive Current Controller for Three-Phase Inverters , 2014, IEEE Transactions on Industrial Informatics.

[14]  D. G. Holmes,et al.  High performance current regulation for low pulse ratio inverters , 2011 .

[15]  Manfred Morari,et al.  Soft Constrained Model Predictive Control With Robust Stability Guarantees , 2014, IEEE Transactions on Automatic Control.

[16]  Jun-Cheol Park,et al.  Switching Strategy Based on Model Predictive Control of VSI to Obtain High Efficiency and Balanced Loss Distribution , 2014, IEEE Transactions on Power Electronics.

[17]  Abdolreza Sheikholeslami,et al.  Predictive modulation schemes to reduce common-mode voltage in three-phase inverters-fed AC drive systems , 2014 .

[18]  Donald Grahame Holmes,et al.  Frequency domain analysis of three phase linear current regulators , 1999 .

[19]  Daniel E. Quevedo,et al.  Finite-Control-Set Model Predictive Control With Improved Steady-State Performance , 2013, IEEE Transactions on Industrial Informatics.

[20]  Leopoldo G. Franquelo,et al.  Model Predictive Control: A Review of Its Applications in Power Electronics , 2014, IEEE Industrial Electronics Magazine.

[21]  Daniel E. Quevedo,et al.  Predictive Control of Power Converters: Designs With Guaranteed Performance , 2015, IEEE Transactions on Industrial Informatics.

[22]  Wooi Ping Hew,et al.  FCS-MPC-Based Current Control of a Five-Phase Induction Motor and its Comparison with PI-PWM Control , 2014, IEEE Transactions on Industrial Electronics.

[23]  Graham C. Goodwin,et al.  Harmonic suppression and delay compensation for inverters via variable horizon nonlinear model predictive control , 2015, Int. J. Control.

[24]  Daniel E. Quevedo,et al.  Predictive Optimal Switching Sequence Direct Power Control for Grid-Connected Power Converters , 2015, IEEE Transactions on Industrial Electronics.

[25]  Ralph Kennel,et al.  Cascade-Free Predictive Speed Control for Electrical Drives , 2014, IEEE Transactions on Industrial Electronics.

[26]  Graham C. Goodwin,et al.  Achieving perfect tracking in presence of saturationplant model and model uncertainty in current regulators for voltage source inverters , 2015 .

[27]  R. Kennel,et al.  Direct model predictive control - a new direct predictive control strategy for electrical drives , 2005, 2005 European Conference on Power Electronics and Applications.

[28]  Graham C. Goodwin,et al.  Predictive control: a historical perspective , 2012 .

[29]  G. Mirzaeva,et al.  A new understanding and improvements of finite set model predictive control in inverter applications , 2015, 2015 17th European Conference on Power Electronics and Applications (EPE'15 ECCE-Europe).