Sensor‐less insertion strategy for an eccentric peg in a hole of the crankshaft and bearing assembly

Purpose - The purpose of this paper is to give a novel sensor-less manipulation strategy for the high-precision assembly of an eccentric peg into a hole.

[1]  Jing Xiao,et al.  Planning Motions Compliant to Complex Contact States , 2001, Int. J. Robotics Res..

[2]  Daniel E. Whitney,et al.  Mechanical Behavior and Design Equations for Elastomer Shear Pad Remote Center Compliances , 1986 .

[3]  Hong Qiao.  Strategy investigation with generalized attractive regions , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[4]  Matthew T. Mason,et al.  An exploration of sensorless manipulation , 1986, Proceedings. 1986 IEEE International Conference on Robotics and Automation.

[5]  Chuankai Liu,et al.  A new insertion strategy for a peg in an unfixed hole of the piston rod assembly , 2012 .

[6]  Sigitas Kilikevičius,et al.  Dynamic analysis of vibratory insertion process , 2011 .

[7]  Mohsen Moradi Dalvand,et al.  A hybrid contact state analysis methodology for robotic-based adjustment of cylindrical pair , 2011 .

[8]  Gunilla Borgefors,et al.  Hierarchical Chamfer Matching: A Parametric Edge Matching Algorithm , 1988, IEEE Trans. Pattern Anal. Mach. Intell..

[9]  Hong Qiao,et al.  Strategy investigation of precise robotic assembly operations with symmetric regular polyhedral objects , 1998 .

[10]  E. Hollnagel.  Handbook of Cognitive Task Design , 2009 .

[11]  Napassavong Rojanarowan,et al.  Intelligent control of microassembly process based on in-process monitoring of pressing force , 2009 .

[12]  Ryspek Usubamatov,et al.  Analyses of peg‐hole jamming in automatic assembly machines , 2011 .

[13]  Warren P. Seering,et al.  Assembly strategies for chamferless parts , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[14]  Ashish Dutta,et al.  SCARA based peg-in-hole assembly using compliant IPMC micro gripper , 2013, Robotics Auton. Syst..

[15]  H. Harry Asada,et al.  The dynamic RCC hand for high-speed assembly , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[16]  Weijun Zhang,et al.  A new robotic assembly modeling and trajectory planning method using synchronized Petri nets , 2005 .

[17]  Hong Qiao,et al.  A model and strategy analysis of the peg-hole system in the search process associated with robotic assembly operations without chamfers , 1996, Robotica.

[18]  Y. L. Yao,et al.  Model-Based Motion Planning for Robotic Assembly of Non-Cylindrical Parts , 1999 .

[19]  Daniel P. Huttenlocher,et al.  Comparing Images Using the Hausdorff Distance , 1993, IEEE Trans. Pattern Anal. Mach. Intell..

[20]  Yasuhisa Hasegawa,et al.  Insertion of long peg into tandem shallow hole using search trajectory generation without force feedback , 2004, IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004.

[21]  Jing Xiao,et al.  Planning motion compliant to complex contact states , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[22]  Sangcheol Lee,et al.  Development of a new variable remote center compliance (VRCC) with modified elastomer shear pad (ESP) for robot assembly , 2005, IEEE Transactions on Automation Science and Engineering.

[23]  Daniel E. Whitney,et al.  Quasi-Static Assembly of Compliantly Supported Rigid Parts , 1982 .

[24]  Michael A. Erdmann,et al.  Using Backprojections for Fine Motion Planning with Uncertainty , 1986 .

[25]  井上 博允,et al.  Force Feedback in Precise Assembly Tasks , 1975 .