Locomotion Control Architecture for the Pneumatic Biped Lucy consisting of a Trajectory Generator and Joint Trajectory Tracking Controller

The biped Lucy is actuated with pleated pneumatic artificial muscles because compliant actuation is important for energy-efficient legged locomotion. To control such a robot a specific control architecture is needed. In this paper we propose a trajectory generator and a joint trajectory tracking controller. The first one calculates dynamic balanced trajectories and is based on an inverted pendulum approximation, which models the robot as a single point mass. The trajectory generator allows the step-length, intermediate foot lift and velocity to be chosen for each step while keeping the zero moment point (ZMP) in the ankle point during the single support phase and it provides a smooth transition of the ZMP from the rear ankle point to the front ankle point during the double support phase. This strategy can be used for every biped. The second part is very specific for a robot powered with pneumatic artificial muscles. Out of the desired trajectories the pressures inside the muscles are calculated. The proposed combination is successfully implemented and the robot is able to walk at 0.11 m/s

[1]  Darwin G. Caldwell,et al.  Investigation of bipedal robot locomotion using pneumatic muscle actuators , 1997, Proceedings of International Conference on Robotics and Automation.

[2]  Atsuo Takanishi,et al.  Stretch walking pattern generation for a biped humanoid robot , 2004 .

[3]  Qiang Huang,et al.  Sensory reflex control for humanoid walking , 2005, IEEE Transactions on Robotics.

[4]  Bram Vanderborght,et al.  A pneumatic biped: experimental walking results and compliance adaptation experiments , 2005, 5th IEEE-RAS International Conference on Humanoid Robots, 2005..

[5]  R. Walker.  Using air muscles for compliant bipedal and many-legged robotics , 1996 .

[6]  C. T. Farley,et al.  Leg stiffness and stride frequency in human running. , 1996, Journal of biomechanics.

[7]  Miomir Vukobratovic,et al.  Note on the Article "Zero-Moment Point - Thirty Five Years of its Life" , 2005, Int. J. Humanoid Robotics.

[8]  Bram Vanderborght,et al.  Second generation pleated pneumatic artificial muscle and its robotic applications , 2006, Adv. Robotics.

[9]  Shuuji Kajita,et al.  Pattern Generation of Biped Walking Constrained on Parametric Surface , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[10]  Philippe Gorce,et al.  On dynamic control of pneumatic bipeds , 1998, J. Field Robotics.

[11]  Kazuhito Yokoi,et al.  Biped walking pattern generation by using preview control of zero-moment point , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[12]  Bram Vanderborght,et al.  The Pneumatic Biped “Lucy” Actuated with Pleated Pneumatic Artificial Muscles , 2005, Auton. Robots.

[13]  Kazuhito Yokoi,et al.  A realtime pattern generator for biped walking , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[14]  R. M. Alexander,et al.  Exploring Biomechanics: Animals in Motion , 1992 .

[15]  Bram Vanderborght,et al.  Fast and Accurate Pressure Control using On-Off Valves , 2005 .

[16]  Bram Vanderborght,et al.  Exploiting Natural Dynamics to Reduce Energy Consumption by Controlling the Compliance of Soft Actuators , 2006, Int. J. Robotics Res..

[17]  H. Schoening.  Muscles Alive—Their function revealed by electromyography (5th edition): by John V. Basmajian and Carlo J. Deluca. Hardcover. Price $45.00. 561 pages. Williams and Wilkins, PO Box 969, Waverly Press Lane, Easton, MD 21601 , 1986 .