A Parallel-Elastic Actuator for a Torque-Controlled Back-Support Exoskeleton

A torque-controlled back-support exoskeleton to assist manual handling is presented. Its objective is to provide a significant portion of the forces necessary to carry out the physical task, thereby reducing the compressive loads on the lumbar spine and the associated risk of injury. The design rationale for a parallel-elastic actuator (PEA) is proposed to match the asymmetrical torque requirements associated with the target task. The parallel spring relaxes the maximum motor torque requirements, with substantial effects on the resulting torque-control performance. A formal analysis and experimental evaluation is presented with the goal of documenting the improvement in performance. To this end, the proposed PEA is compared with a more traditional configuration without the parallel spring. The formal analysis and experimental results highlight the importance of the motor inertia reflected through the gearbox and illustrate the improvements in the proposed measures of torque-control performance.

[1]  Nikolaos G. Tsagarakis,et al.  An asymmetric compliant antagonistic joint design for high performance mobility , 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[2]  Fadi A Fathallah,et al.  Subject-specific, whole-body models of the stooped posture with a personal weight transfer device. , 2013, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[3]  J. H. van Dieen,et al.  SPEXOR: Towards a Passive Spinal Exoskeleton , 2017 .

[4]  Neville Hogan,et al.  An analysis of contact instability in terms of passive physical equivalents , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[5]  Michael J Agnew,et al.  An on-body personal lift augmentation device (PLAD) reduces EMG amplitude of erector spinae during lifting tasks. , 2006, Clinical biomechanics.

[6]  Darwin G. Caldwell,et al.  Mechanical design and analysis of light weight hip joint Parallel Elastic Actuator for industrial exoskeleton , 2016, 2016 6th IEEE International Conference on Biomedical Robotics and Biomechatronics (BioRob).

[7]  Yoshiyuki Sankai,et al.  Development of HAL for Lumbar Support , 2010 .

[8]  Bram Vanderborght,et al.  Series and Parallel Elastic Actuation: Influence of Operating Positions on Design and Control , 2017, IEEE/ASME Transactions on Mechatronics.

[9]  Y. Sankai,et al.  HAL equipped with passive mechanism , 2012, 2012 IEEE/SICE International Symposium on System Integration (SII).

[10]  J. Edward Colgate.  The control of dynamically interacting systems , 1988 .

[11]  Neville Hogan,et al.  Robust control of dynamically interacting systems , 1988 .

[12]  H. Kobayashi,et al.  Development of muscle suit and application to factory laborers , 2009, 2009 International Conference on Mechatronics and Automation.

[13]  Frank Krause,et al.  Exoskeletons for industrial application and their potential effects on physical work load , 2016, Ergonomics.

[14]  Neville Hogan,et al.  Controlling impedance at the man/machine interface , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[15]  André Seyfarth,et al.  A comparison of parallel- and series elastic elements in an actuator for mimicking human ankle joint in walking and running , 2012, 2012 IEEE International Conference on Robotics and Automation.

[16]  Riccardo Muradore,et al.  A Review of Algorithms for Compliant Control of Stiff and Fixed-Compliance Robots , 2016, IEEE/ASME Transactions on Mechatronics.

[17]  D. Lefeber,et al.  Series and Parallel Elastic Actuation: Impact of natural dynamics on power and energy consumption , 2016 .

[18]  Bram Vanderborght,et al.  Towards low back support with a passive biomimetic exo-spine , 2017, 2017 International Conference on Rehabilitation Robotics (ICORR).

[19]  Herman van der Kooij,et al.  Model predictive control-based gait pattern generation for wearable exoskeletons , 2011, 2011 IEEE International Conference on Rehabilitation Robotics.

[20]  Homayoon Kazerooni,et al.  Lower Extremity Exoskeleton Reduces Back Forces in Lifting , 2009 .

[21]  M. de Looze,et al.  The effects of a passive exoskeleton on muscle activity, discomfort and endurance time in forward bending work. , 2016, Applied ergonomics.

[22]  Darwin G. Caldwell,et al.  A wearable device for reducing spinal loads during lifting tasks: Biomechanics and design concepts , 2015, 2015 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[23]  Yong Yu,et al.  Wearable stooping-assist device in reducing risk of low back disorders during stooped work , 2013, 2013 IEEE International Conference on Mechatronics and Automation.

[24]  Joost Geeroms,et al.  Reduction of the torque requirements of an active ankle prosthesis using a parallel spring , 2017, Robotics Auton. Syst..