论文信息 - Accuracy Improvement of Robot-Based Milling Using an Enhanced Manipulator Model

Accuracy Improvement of Robot-Based Milling Using an Enhanced Manipulator Model

The paper is devoted to the accuracy improvement of robot-based milling by using an enhanced manipulator model that takes into account both geometric and elastostatic factors. Particular attention is paid to the model parameters identification accuracy. In contrast to other works, the proposed approach takes into account impact of the gravity compensator and link weights on the manipulator elastostatic properties. In order to improve the identification accuracy, the industry oriented performance measure is used to define optimal measurement configurations and an enhanced partial pose measurement method is applied for the identification of the model parameters. The advantages of the developed approach are confirmed by experimental results that deal with the elastostatic calibration of a heavy industrial robot used for milling. The achieved accuracy improvement factor is about 2.4.

[1] J. Salisbury,et al. Active stiffness control of a manipulator in cartesian coordinates , 1980, 1980 19th IEEE Conference on Decision and Control including the Symposium on Adaptive Processes.

[2] Damien Chablat,et al. Enhanced stiffness modeling of manipulators with passive joints , 2011, ArXiv.

[3] Sébastien Briot,et al. Compensation of Tool Deflection in Robotic-based Milling , 2012, ICINCO.

[4] J. Angeles,et al. The stiffness matrix in elastically articulated rigid-body systems , 2007 .

[5] Clément Gosselin,et al. Parallel Mechanisms and Robots , 2008, Springer Handbook of Robotics.

[6] Stéphane Caro,et al. Joint stiffness identification of six-revolute industrial serial robots , 2011 .

[7] Oussama Khatib,et al. Springer Handbook of Robotics , 2007, Springer Handbooks.

[8] Anatoly Pashkevich,et al. Optimal Selection of Measurement Configurations for Stiffness Model Calibration of Anthropomorphic Manipulators , 2012, ArXiv.