Torque estimation technique of robotic joint with harmonic drive transmission

A joint torque estimation technique utilizing the existing structural elasticity of robotic joints with harmonic drive transmission is proposed in this paper. Joint torque sensing is one of the key techniques for achieving high-performance robot control, especially for robots working in unstructured environments. The proposed joint torque estimation technique uses link-side position measurement along with a proposed harmonic derive model to realize stiff and sensitive torque estimation. The proposed joint torque estimation method has been experimentally studied in comparison with a commercial torque sensor, and the results have attested the effectiveness of the proposed torque estimation technique.

[1]  Richard P. Paul,et al.  A torque sensing technique for robots with harmonic drives , 1993, IEEE Trans. Robotics Autom..

[2]  Thomas J. Royston,et al.  A high-fidelity harmonic drive model , 2012 .

[3]  H. Kajimoto,et al.  Optical torque sensors for implementation of local impedance control of the arm of humanoid robot , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[4]  Wen-Hong Zhu,et al.  Adaptive control of harmonic drives , 2004, 2004 43rd IEEE Conference on Decision and Control (CDC) (IEEE Cat. No.04CH37601).

[5]  Giulio Sandini,et al.  A comparison between joint level torque sensing and proximal F/T sensor torque estimation: implementation on the iCub , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[6]  J.P. Desai,et al.  Modeling and control of the Mitsubishi PA-10 robot arm harmonic drive system , 2005, IEEE/ASME Transactions on Mechatronics.

[7]  J.M. Hollerbach,et al.  A Modular and High-Precision Motion Control System With an Integrated Motor , 2007, IEEE/ASME Transactions on Mechatronics.

[8]  Masakatsu Sasahara,et al.  The strain wave gearing , 2013 .

[9]  R.Fff. Weir,et al.  Improved torque fidelity in harmonic drive sensors through the union of two existing strategies , 2006, IEEE/ASME Transactions on Mechatronics.

[10]  Hamid D. Taghirad,et al.  Torque ripple and misalignment torque compensation for the built-in torque sensor of harmonic drive systems , 1998, IEEE Trans. Instrum. Meas..

[11]  Hiroshi Kaminaga,et al.  High-fidelity joint drive system by torque feedback control using high precision linear encoder , 2010, 2010 IEEE International Conference on Robotics and Automation.

[12]  Guangjun Liu,et al.  Distributed Modular and Reconfigurable Robot Control with Torque Sensing , 2006, 2006 International Conference on Mechatronics and Automation.

[13]  Tamotsu Ninomiya,et al.  Accuracy improvement of built-in torque sensing for Harmonic Drives , 2000 .

[14]  Alessandro De Luca,et al.  Friction observer and compensation for control of robots with joint torque measurement , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[15]  Oussama Khatib,et al.  Design and development of high-performance torque-controlled joints , 1995, IEEE Trans. Robotics Autom..