Superconductivity: its role, its success and its setbacks in the Large Hadron Collider of CERN

The Large Hadron Collider (LHC), the particle accelerator at CERN, Geneva, is the largest and probably the most complex scientific instrument ever built. Superconductivity plays a key role because the accelerator is based on the reliable operation of almost 10?000 superconducting magnets cooled by 130 tonnes of helium at 1.9 and 4.2?K and containing a total stored magnetic energy of about 15?000?MJ (including detector magnets). The characteristics of the 1200 tonnes of high quality Nb?Ti cables have met the severe requests in terms of critical currents, magnetization and inter-strand resistance; the magnets are built with an unprecedented uniformity, about 0.01% of variation in field quality among the 1232 main dipoles, which are 15?m in length and 30 tonnes in weight. The results of this 20-year-long enterprise will be discussed together with problems faced during construction and commissioning and their remedies. Particular reference is made to the severe incident which occurred nine days after the spectacular start-up of the machine on 10 September 2008. The status of repair and the plan for the physics programme in 2010 are also presented.

[1]  Nicholas Sammut,et al.  Mathematical formulation to predict the harmonics of the superconducting Large Hadron Collider magnets , 2006 .

[2]  S. Sanfilippo,et al.  Steering field quality in the main dipole magnets of the Large Hadron Collider , 2004, IEEE Transactions on Applied Superconductivity.

[3]  L. Rossi,et al.  ELECTROMAGNETIC DESIGN OF SUPERCONDUCTING DIPOLES BASED ON SECTOR COILS , 2007 .

[4]  C. Scheuerlein,et al.  Thickness Measurement of Sn-Ag Hot Dip Coatings on Large Hadron Collider Superconducting Strands by Coulometry , 2004 .

[5]  L. Evans.  Status of the Large Hadron Collider (LHC) , 2004, IEEE Transactions on Applied Superconductivity.

[6]  M.N. Wilson,et al.  Superconductivity and accelerators: the good companions , 1999, IEEE Transactions on Applied Superconductivity.

[7]  N. Sammut,et al.  Mathematical formulation to predict the harmonics of the superconducting Large Hadron Collider magnets. II. Dynamic field changes and scaling laws , 2007 .

[8]  R. Ostojić.  Superconducting magnets for LHC insertions , 2004, IEEE Transactions on Applied Superconductivity.

[9]  Z. Charifoulline,et al.  Residual Resistivity Ratio (RRR) Measurements of LHC Superconducting NbTi Cable Strands , 2006, IEEE Transactions on Applied Superconductivity.

[10]  L. Rossi,et al.  Status Report on the Series Production of the Main Superconducting Dipole Magnets for LHC , 2006, IEEE Transactions on Applied Superconductivity.

[11]  G. Brianti.  Large hadron collider in the LEP tunnel , 1989 .

[12]  L. Rossi.  The LHC main dipoles and quadrupoles toward series production , 2003 .

[13]  P. Proudlock,et al.  The protection system for the superconducting elements of the Large Hadron Collider at CERN , 1999, Proceedings of the 1999 Particle Accelerator Conference (Cat. No.99CH36366).

[14]  A. Prodell,et al.  Minimum quench energy measurements on prototype LHC inner cables in normal helium at 4.4 K and in superfluid He at 1.9 K , 1999, IEEE Transactions on Applied Superconductivity.

[15]  L. Rossi,et al.  Completion of the series fabrication of the main superconducting quadrupole magnets of LHC , 2007, 2007 IEEE Particle Accelerator Conference (PAC).

[16]  H. Wiedemann.  Particle accelerator physics , 1993 .

[17]  L. Rossi.  The Large Hadron Collider and the Role of Superconductivity in One of the Largest Scientific Enterprises , 2007, IEEE Transactions on Applied Superconductivity.

[18]  G. Aad,et al.  The ATLAS Experiment at the CERN Large Hadron Collide , 2008 .

[19]  Lucio Rossi.  EXPERIENCE WITH LHC MAGNETS FROM PROTOTYPING TO LARGE- SCALE INDUSTRIAL PRODUCTION AND INTEGRATION , 2004 .

[20]  L. Rossi.  Superconducting magnets for the LHC main lattice , 2004, IEEE Transactions on Applied Superconductivity.

[21]  A. Verweij,et al.  Critical Current Measurements of the Main LHC Superconducting Cables , 2007, IEEE Transactions on Applied Superconductivity.

[22]  G. Willering.  Stability of Superconducting Rutherford Cables , 2009 .

[23]  João Paulo Teixeira,et al.  The CMS experiment at the CERN LHC , 2008 .

[24]  S. Sanfilippo,et al.  A scaling law for the snapback in Superconducting accelerator magnets , 2005, IEEE Transactions on Applied Superconductivity.

[25]  S. Russenschuck,et al.  THE QUALITY CONTROL OF THE LHC CONTINUOUS CRYOSTAT INTERCONNECTIONS , 2008 .

[26]  R. Perin,et al.  Superconducting magnets for particle accelerators (dipoles, multipoles) , 1998 .

[27]  D. Leroy,et al.  Strand coating for the superconducting cables of the LHC main magnets , 1999, IEEE Transactions on Applied Superconductivity.

[28]  P. Vedrine,et al.  Construction of the new prototype of main quadrupole cold masses for the arc short straight sections of LHC , 2000, IEEE Transactions on Applied Superconductivity.

[29]  J. Tock,et al.  Ultrasound diagnostics of the superconducting cable connections between the main ring magnets of LHC , 2007, 2007 IEEE Particle Accelerator Conference (PAC).

[30]  R. Perin.  Status of LHC programme and magnet development , 1995, IEEE Transactions on Applied Superconductivity.

[31]  R. Perin,et al.  Test results on the long models and full scale prototypes of the second generation LHC arc dipoles , 1999, IEEE transactions on applied superconductivity.

[32]  L. Rossi,et al.  Superconducting magnets for accelerators and detectors , 2003 .

[33]  A. Ijspeert,et al.  Status of the production of the LHC superconducting corrector magnets , 2004, IEEE Transactions on Applied Superconductivity.

[34]  Parma,et al.  Report of the Task Force on the Incident of 19th September 2008 at the LHC , 2009 .

[35]  R. Perin,et al.  First Nb3Sn, 1m Long Superconducting Dipole Model Magnets for LHC Break the 10 Tesla Field Threshold , 1990 .

[36]  D. Leroy,et al.  Critical Current Density in Superconducting$rm Nb-Ti$Strands in the 100 mT to 11 T Applied Field Range , 2006, IEEE Transactions on Applied Superconductivity.

[37]  Parma,et al.  Performance of the LHC magnet system , 2009 .

[38]  D. Leroy.  Review of the RaD and Supply of the LHC Superconducting Cables , 2006 .

[39]  C. Wyss.  THE LHC MAGNET PROGRAMME: FROM ACCELERATOR PHYSICS REQUIREMENTS TO PRODUCTION IN INDUSTRY , 2000 .

[40]  C. Vollinger,et al.  Trends in Field Quality Along the Production of the LHC Dipoles andDifferences Among Manufacturers , 2006, IEEE Transactions on Applied Superconductivity.

[41]  D. Leroy,et al.  DC measurement of electrical contacts between strands in superconducting cables for the LHC main magnets , 1997, IEEE Transactions on Applied Superconductivity.