A chromatic technique for structural damage detection under noise effects based on impedance measurements

[1]  Kiran Kumar Annamdas,et al.  Different types of piezoceramic-structure interaction models using electro mechanical impedance technique: a review , 2009, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[2]  Hongping Zhu,et al.  A Novel Damage Indicator Based on the Electromechanical Impedance Principle for Structural Damage Identification , 2018, Sensors.

[3]  R Nagendran,et al.  Correlation of defect depth with diffusion time of eddy currents for the defects in conducting materials using transient eddy current NDE , 2018, Measurement Science and Technology.

[4]  Branko Glisic,et al.  Dense sensor networks for mesoscale SHM: Innovations in sensing technologies and signal processing , 2017 .

[5]  Charles R. Farrar,et al.  Structural Health Monitoring: A Machine Learning Perspective , 2012 .

[6]  Jing Lin,et al.  Improving the resolution for Lamb wave testing via a smoothed Capon algorithm , 2018 .

[7]  Dan Ding,et al.  UHF Signal Processing and Pattern Recognition of Partial Discharge in Gas-Insulated Switchgear Using Chromatic Methodology , 2017, Sensors.

[8]  The design and calibration of particular geometry piezoelectric acoustic emission transducer for leak detection and localization , 2013 .

[9]  Saad A. A. Jabir,et al.  Thick-Film Ceramic Strain Sensors for Structural Health Monitoring , 2011, IEEE Transactions on Instrumentation and Measurement.

[10]  Emmanuel Ramasso,et al.  Unsupervised Consensus Clustering of Acoustic Emission Time-Series for Robust Damage Sequence Estimation in Composites , 2015, IEEE Transactions on Instrumentation and Measurement.

[11]  Danilo Ecidir Budoya,et al.  A Comparative Study of Impedance Measurement Techniques for Structural Health Monitoring Applications , 2018, IEEE Transactions on Instrumentation and Measurement.

[12]  S. Tenbohlen,et al.  Detection and location of partial discharges in power transformers using acoustic and electromagnetic signals , 2008, IEEE Transactions on Dielectrics and Electrical Insulation.

[13]  Eduardo Carlos Bianchi,et al.  Grinding process monitoring based on electromechanical impedance measurements , 2015 .

[14]  Fucai Li,et al.  An improved instantaneous baseline method for pipe structures based on distance compensation using guided waves , 2018, Measurement Science and Technology.

[15]  Hojjat Adeli,et al.  Signal Processing Techniques for Vibration-Based Health Monitoring of Smart Structures , 2016 .

[16]  T. Kundu,et al.  Point of impact prediction in isotropic and anisotropic plates from the acoustic emission data. , 2007, The Journal of the Acoustical Society of America.

[17]  Dirk Söffker,et al.  Identification and classification of failure modes in laminated composites by using a multivariate statistical analysis of wavelet coefficients , 2017 .

[18]  Firdaus Muhammad-Sukki,et al.  A Comparison of Inductive Sensors in the Characterization of Partial Discharges and Electrical Noise Using the Chromatic Technique , 2018, Sensors.

[19]  Jozue Vieira Filho,et al.  Time-domain analysis of piezoelectric impedance-based structural health monitoring using multilevel wavelet decomposition , 2011 .

[20]  Ágota Drégelyi-Kiss,et al.  Analysis of surface roughness of aluminum alloys fine turned: United phenomenological models and multi-performance optimization , 2015 .

[21]  Ali Bastani,et al.  Identification of temperature variation and vibration disturbance in impedance-based structural health monitoring using piezoelectric sensor array method , 2012 .

[22]  Ximing Cui,et al.  A robust indicator based on singular value decomposition for flaw feature detection from noisy ultrasonic signals , 2018 .

[23]  Sergio Verdú,et al.  Capacity of root-mean-square bandlimited Gaussian multiuser channels , 1991, IEEE Trans. Inf. Theory.

[24]  Michael J. Brennan,et al.  Structural damage detection in an aeronautical panel using analysis of variance , 2015 .

[25]  Dirk Vandepitte,et al.  Computational model for supporting SHM systems design: Damage identification via numerical analyses , 2017 .

[26]  F. Baptista,et al.  Impedance-based damage detection under noise and vibration effects , 2018 .

[27]  Hui Luo,et al.  Mechanical impedance-based technique for steel structural corrosion damage detection , 2016 .

[28]  Francesco Ciampa,et al.  Acoustic emission localization in complex dissipative anisotropic structures using a one-channel reciprocal time reversal method. , 2011, The Journal of the Acoustical Society of America.

[29]  D. Hinkley.  Inference about the change-point from cumulative sum tests , 1971 .

[30]  Greg E. Bridges,et al.  Corrosion Potential Sensor for Remote Monitoring of Civil Structure Based on Printed Circuit Board Sensor , 2014, IEEE Transactions on Instrumentation and Measurement.

[31]  Lampros K. Stergioulas,et al.  The Gabor transform basis of chromatic monitoring , 2000 .

[32]  José Alfredo Covolan Ulson,et al.  Assessment of Macro Fiber Composite Sensors for Measurement of Acoustic Partial Discharge Signals in Power Transformers , 2017, IEEE Sensors Journal.

[33]  B. Tang,et al.  Quantitative rotor damage detection based on piezoelectric impedance , 2015 .

[34]  Francesco Ciampa,et al.  Recent Advances in Active Infrared Thermography for Non-Destructive Testing of Aerospace Components , 2018, Sensors.

[35]  Jochen Moll,et al.  Spectral element modelling of wave propagation in isotropic and anisotropic shell-structures including different types of damage , 2010 .

[36]  G. De Roeck,et al.  Vibration based Structural Health Monitoring using output-only measurements under changing environment , 2008 .

[37]  Hao Wang,et al.  Experimental Study on Damage Detection in Timber Specimens Based on an Electromechanical Impedance Technique and RMSD-Based Mahalanobis Distance , 2016, Sensors.

[38]  Venu Gopal Madhav Annamdas,et al.  Electromechanical impedance of piezoelectric transducers for monitoring metallic and non-metallic structures: A review of wired, wireless and energy-harvesting methods , 2013 .

[39]  Yoshinori Takahashi.  Evaluation of environmental noise by analyzing faint random vibration in structural health monitoring , 2016 .

[40]  B. A. de Castro,et al.  Equivalent Circuit of Piezoelectric Diaphragms for Impedance-Based Structural Health Monitoring Applications , 2017, IEEE Sensors Journal.