Robotic Exploration of Surfaces With a Compliant Wrist Sensor

This article presents some results of an ongoing research project to investigate the components and modules that are necessary to equip a robot with exploratory capabilities. Of particular interest is the recovery of certain material properties from a surface, given minimal a priori information, with the intent to use this information to enable a robot to stand and walk stably on a surface that is unknown and unconstrained. To this end, exploratory procedures (EPs) have been designed and implemented to recover penetrability, compliance, and surface roughness by exploring the surface using a compliant wrist sensor. A six-degree-of-freedom compliant wrist sensor that combines passive compliance and active sensing has been developed to provide the necessary flexibility for force and con tact control, as well as accurate position control. This article describes the compliant wrist and sensing mechanism design along with a hybrid control algorithm that utilizes the sensed information from the wrist to adjust the apparent stiffness of the end effector as desired.

[1]  Daniel E. Whitney,et al.  Mechanical Behavior and Design Equations for Elastomer Shear Pad Remote Center Compliances , 1986 .

[2]  Antonio Bicchi,et al.  Leg-ankle-foot System For Investigating Sensor-based Legged Locomotion , 1989, Proceedings. IEEE/RSJ International Workshop on Intelligent Robots and Systems '. (IROS '89) 'The Autonomous Mobile Robots and Its Applications.

[3]  Ruzena Bajcsy,et al.  Exploration of Surfaces for Robot Mobility , 1990 .

[4]  Ruzena Bajcsy,et al.  How does a robot know where to step? Measuring the hardness and roughness of surfaces , 1990, EEE International Workshop on Intelligent Robots and Systems, Towards a New Frontier of Applications.

[5]  Mark R. Cutkosky,et al.  Position sensing wrists for industrial manipulators , 1982 .

[6]  H. Harry Asada,et al.  On the dynamic analysis of a manipulator and its end effector interacting with the environment , 1987, Proceedings. 1987 IEEE International Conference on Robotics and Automation.

[7]  R. Klatzky,et al.  There's more to touch than meets the eye: The salience of object attributes for haptics with and without vision. , 1987 .

[8]  J. Salisbury,et al.  Active stiffness control of a manipulator in cartesian coordinates , 1980, 1980 19th IEEE Conference on Decision and Control including the Symposium on Adaptive Processes.

[9]  R. Platek,et al.  Hybrid control , 1992, IEEE Symposium on Computer-Aided Control System Design.

[10]  Kenneth J. Waldron,et al.  Semi-autonomous design concepts for a Mars rover , 1989 .

[11]  Jean-Pierre Merlet,et al.  C-surface applied to the design of an hybrid force-position robot controller , 1987, Proceedings. 1987 IEEE International Conference on Robotics and Automation.

[12]  Yangsheng Xu.  Compliant wrist design and hybrid position/force control of robot manipulators , 1989 .

[13]  Malcolm D. Bolton,et al.  A guide to soil mechanics , 1979 .

[14]  Ruzena Bajcsy,et al.  Robotic exploration of surfaces and its application to legged locomotion , 1991, Proceedings 1992 IEEE International Conference on Robotics and Automation.

[15]  John J. Craig,et al.  Hybrid position/force control of manipulators , 1981 .

[16]  Richard P. Paul,et al.  On position compensation and force control stability of a robot with a compliant wrist , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[17]  Richard P. Paul,et al.  The implementation of hybrid control in the presence of passive compliance , 1991 .

[18]  Peter I. Corke,et al.  Hybrid Position Force Control of Robot Manipulator with an Instrumented Compliant Wrist , 1989, ISER.

[19]  Sharon A. Stansfield,et al.  A haptic system for a multifingered hand , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[20]  Homayoon Kazerooni.  Direct-drive active compliant end effector (active RCC) , 1988, IEEE J. Robotics Autom..

[21]  Matthew T. Mason,et al.  Compliance and Force Control for Computer Controlled Manipulators , 1981, IEEE Transactions on Systems, Man, and Cybernetics.

[22]  Richard P. Paul,et al.  Robotics research : the First International Symposium , 1984 .

[23]  Stanley J. Larimer,et al.  Simple Autonomous Mars Walker , 1989, Other Conferences.

[24]  Daniel E. Whitney,et al.  Force Feedback Control of Manipulator Fine Motions , 1977 .

[25]  R. Klatzky,et al.  Hand movements: A window into haptic object recognition , 1987, Cognitive Psychology.

[26]  Hendrik Van Brussel,et al.  Further developments of the active adaptable compliant wrist (AACW) for robot assembly , 1981 .

[27]  Joris De Schutter,et al.  A study of active compliant motion control methods for rigid manipulators based on a generic scheme , 1987, ICRA.

[28]  Joseph E. Bowles,et al.  Engineering Properties of Soils and Their Measurement , 1978 .

[29]  Akihito Sano,et al.  Special Issue on Legged Locomotion , 1993 .

[30]  Eric Krotkov,et al.  Active perception for legged locomotion: every step is an experiment , 1990, Proceedings. 5th IEEE International Symposium on Intelligent Control 1990.

[31]  M. G. Bekker.  Theory of Land Locomotion: The Mechanics of Vehicle Mobility , 1962 .