A non-contact linear bearing and actuator via ultrasonic levitation

Abstract In this study, the design and testing of a linear bearing using near-field acoustic levitation (NFAL) phenomenon was performed. A pair of Langevin transducers placed at either end of a beam with either a right-angle V-shaped or Λ-shaped cross-section was used to excite and absorb ultrasonic flexural vibrations transmitted along the length of the beam from one transducer to the other. The beam was used as a guide rail, supporting a slider formed from a short length of beam with the same cross-section. This arrangement provides a small and inexpensive non-contact bearing with magnetic field immunity and without generating a magnetic field, both useful characteristics for clean room and precision actuators. The slider was levitated by the vibration of the beam up to 100 μm, and was moved successfully in either direction by traveling waves transmitted along the guide rail. In a 300-mm long prototype, objects up to 160 g (60.5 kg/m2) were levitated and transported. A transportation speed of 138 mm/s was obtained for a slider of 90 g. The stiffness of the levitation was found to be 1.1 N/μm/m2 for this prototype.

[1]  E. F. F. Chladni.  Entdeckungen über die Theorie des Klanges , 1967 .

[2]  Minoru Kurosawa,et al.  High speed ultrasonic linear motor with high transmission efficiency , 1989 .

[3]  Goro Obinata,et al.  Air-bearing linear actuator for highly precise tracking , 2003 .

[4]  T. Funakubo,et al.  Ultrasonic Linear Motor Using Multilayer Piezoelectric Actuators , 1995 .

[5]  谷口 紀男,et al.  Nanotechnology : integrated processing systems for ultra-precision and ultra-fine products , 1996 .

[6]  Anthony I. Eller,et al.  Force on a Bubble in a Standing Acoustic Wave , 1968 .

[7]  Sadayuki Ueha,et al.  Acoustic levitation of planar objects using a longitudinal vibration mode , 1995 .

[8]  Ngoi Kok Ann,et al.  A New Linear Piezoelectric Motor with Self-Lock Feature , 2000 .

[9]  S. Ueha,et al.  Excitation conditions of flexural traveling waves for a reversible ultrasonic linear motor , 1985 .

[10]  K. Yosioka,et al.  Acoustic radiation pressure on a compressible sphere , 1955 .

[11]  Mark W. Spong,et al.  Control of Planar Rigid Body Sliding with Impacts and Friction , 2000, Int. J. Robotics Res..

[12]  Stephen M. Cox,et al.  Nonaxisymmetric flow between an air table and a floating disk , 2002 .

[13]  Thomas D. Rossing,et al.  Chladni’s law for vibrating plates , 1982 .

[14]  M. Kurosawa,et al.  Ultrasonic linear motor using surface acoustic waves , 1996, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[15]  Kentaro Nakamura,et al.  An analysis of a noncontact ultrasonic motor with an ultrasonically levitated rotor , 1997 .

[16]  Ueha,et al.  Holding characteristics of planar objects suspended by near-field acoustic levitation , 2000, Ultrasonics.

[17]  Sadayuki Ueha,et al.  Trial Construction of a Noncontact Ultrasonic Motor with an Ultrasonically Levitated Rotor , 1996 .

[18]  Sang-Ho Lee,et al.  Positioning performance and straightness error compensation of the magnetic levitation stage supported by the linear magnetic bearing , 2003, IEEE Trans. Ind. Electron..

[19]  Jean-François Manceau,et al.  Linear motor using a quasi-travelling wave in a rectangular plate , 1996 .

[20]  Y. Tomikawa,et al.  Analysis of nonaxisymmetric vibration mode piezoelectric annular plate and its application to an ultrasonic motor , 1990, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[21]  Ueha,et al.  Non-contact transportation using near-field acoustic levitation , 1999, Ultrasonics.

[22]  Hiroshi Kubota,et al.  Sub-nanometer resolution ultrasonic motor for 300 mm wafer lithography precision stage , 2001 .

[23]  Franco Bernelli-Zazzera,et al.  Experiments on Command Shaping Control of a Manipulator with Flexible Links , 2002 .

[24]  Seiji Hirose,et al.  An Analysis on the Driving Force and Optimum Frequency of a Noncontact-Type Ultrasonic Motor , 1994 .

[25]  Deuk-Young Han,et al.  Compound Linear Ultrasonic Motor Based on Shaking Beam , 2004 .

[26]  E. O. J. Salbu,et al.  Compressible Squeeze Films and Squeeze Bearings , 1964 .

[27]  C. P. Lee,et al.  Acoustic radiation pressure , 1992 .

[28]  Takehiro Takano,et al.  Piezoelectric Linear Motor with Two Motional Functions of Small Displacement and Large Displacement , 2002 .

[29]  Robert E. Apfel,et al.  Acoustic radiation pressure produced by a beam of sound , 1981 .

[30]  T. Higuchi,et al.  Transducer for high speed and large thrust ultrasonic linear motor using two sandwich-type vibrators , 1998, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[31]  D. M. Auslander,et al.  Nanometer positioning of a linear motion stage under static loads , 1998 .

[32]  Sadayuki Ueha,et al.  Transporting objects without contact using flexural traveling waves , 1998 .

[33]  Junichi Toyoda,et al.  A Small-Size Ultrasonic Linear Motor , 1991 .

[34]  Akira Nakamura,et al.  Waveform Variation of Reflected Acoustic Shock Pulse due to Work Hardening at a Solid-Solid Interface , 1977 .

[35]  Kurosawa.  State-of-the-art surface acoustic wave linear motor and its future applications , 2000, Ultrasonics.