A general and novel approach for parameter identification of 6-DOF parallel kinematic machines

[1]  Bahram Ravani,et al.  An overview of robot calibration , 1987, IEEE Journal on Robotics and Automation.

[2]  John M. Hollerbach,et al.  A survey of kinematic calibration , 1989 .

[3]  Oussama Khatib,et al.  The robotics review 1 , 1989 .

[4]  Chia-Hsiang Menq,et al.  Determination of Optimal Measurement Configurations for Robot Calibration Based on Observability Measure , 1991, Int. J. Robotics Res..

[5]  Zvi S. Roth,et al.  Fundamentals of Manipulator Calibration , 1991 .

[6]  Hanqi Zhuang,et al.  Method for kinematic calibration of stewart platforms , 1993, J. Field Robotics.

[7]  Jian Wang,et al.  On the accuracy of a Stewart platform. II. Kinematic calibration and compensation , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[8]  Tatsuo Arai,et al.  An implicit loop method for kinematic calibration and its application to closed-chain mechanisms , 1995, IEEE Trans. Robotics Autom..

[9]  S. Sartori,et al.  Geometric Error Measurement and Compensation of Machines , 1995 .

[10]  Lixin Liu,et al.  Self-calibration of a class of parallel manipulators , 1996, Proceedings of IEEE International Conference on Robotics and Automation.

[11]  Hanqi Zhuang,et al.  Self-calibration of parallel mechanisms with a case study on Stewart platforms , 1997, IEEE Trans. Robotics Autom..

[12]  Hanqi Zhuang,et al.  Calibration of stewart platforms and other parallel manipulators by minimizing inverse kinematic residuals , 1998 .

[13]  Frank Chongwoo Park,et al.  Geometric algorithms for closed chain kinematic calibration , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[14]  Clément Gosselin,et al.  Determination of closed form solution to the 2-D orientation workspace of Gough-Stewart parallel manipulators , 1999, IEEE Trans. Robotics Autom..

[15]  Jinsong Wang,et al.  Closed Form Solution to Workspace of Hexapod-Based Virtual Axis Machine Tools , 1999 .

[16]  Wisama Khalil,et al.  Self calibration of Stewart-Gough parallel robots without extra sensors , 1999, IEEE Trans. Robotics Autom..

[17]  John C. Ziegert,et al.  Fundamental Comparison of the Use of Serial and Parallel Kinematics for Machines Tools , 1999 .

[18]  Jing Song,et al.  Parallel Kinematic Machine Positioning Accuracy Assessment and Improvement , 2000 .

[19]  Tian Huang,et al.  A Simple yet Effective Approach for Error Compensation of a Tripod-Based Parallel Kinematic Machine , 2000 .

[20]  Wisama Khalil,et al.  Identifiable parameters for parallel robots kinematic calibration , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[21]  Abdul Rauf,et al.  Fully autonomous calibration of parallel manipulators by imposing position constraint , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[22]  Tian Huang,et al.  A Unified Error Model for Tolerance Design, Assembly and Error Compensation of 3-DOF Parallel Kinematic Machines with Parallelogram Struts , 2002 .

[23]  Manfred Weck,et al.  Parallel Kinematic Machine Tools – Current State and Future Potentials , 2002 .