Design Architecture for Continuous-Time Control of Dual Active Bridge Converter

[1]  Zhengming Zhao,et al.  Energy Feed-Forward and Direct Feed-Forward Control for Solid-State Transformer , 2015, IEEE Transactions on Power Electronics.

[2]  Wenhua Liu,et al.  Efficiency Characterization and Optimization of Isolated Bidirectional DC–DC Converter Based on Dual-Phase-Shift Control for DC Distribution Application , 2013, IEEE Transactions on Power Electronics.

[3]  A Kwasinski,et al.  Quantitative Evaluation of DC Microgrids Availability: Effects of System Architecture and Converter Topology Design Choices , 2011, IEEE Transactions on Power Electronics.

[4]  Johann W. Kolar,et al.  Performance Optimization of a High Current Dual Active Bridge with a Wide Operating Voltage Range , 2006 .

[5]  Kai Zhang,et al.  Large- and Small-Signal Average-Value Modeling of Dual-Active-Bridge DC–DC Converter Considering Power Losses , 2017, IEEE Transactions on Power Electronics.

[6]  German G Oggier,et al.  Modulation strategy to operate the dual active bridge DC-DC converter under soft switching in the whole operating range , 2011, IEEE Transactions on Power Electronics.

[7]  Akshay Kumar Rathore,et al.  Small-Signal Analysis of Naturally Commutated Current-Fed Dual Active Bridge Converter and Control Implementation Using Cypress PSoC , 2015, IEEE Transactions on Vehicular Technology.

[8]  J.L. Duarte,et al.  A Soft-Switched Three-Port Bidirectional Converter for Fuel Cell and Supercapacitor Applications , 2005, 2005 IEEE 36th Power Electronics Specialists Conference.

[9]  D. G. Holmes,et al.  Adaptive dynamic control of a bi-directional DC-DC converter , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[10]  C. D. de Silva,et al.  Stability Analysis of Isolated Bidirectional Dual Active Full-Bridge DC–DC Converter With Triple Phase-Shift Control , 2012, IEEE Transactions on Power Electronics.

[11]  W. Khan-ngern.  Design of a Single Bi-directional DC-DC Converter for On-board Energy Improving of Zero Emission Electric Vehicles , 2007, 2007 7th International Conference on Power Electronics and Drive Systems.

[12]  Fei Wang,et al.  Design and Demonstration of a 3.6-kV–120-V/10-kVA Solid-State Transformer for Smart Grid Application , 2014, IEEE Transactions on Power Electronics.

[13]  Johann W. Kolar,et al.  SiC versus Si—Evaluation of Potentials for Performance Improvement of Inverter and DC–DC Converter Systems by SiC Power Semiconductors , 2011, IEEE Transactions on Industrial Electronics.

[14]  J.W. Kolar,et al.  Accurate Small-Signal Model for the Digital Control of an Automotive Bidirectional Dual Active Bridge , 2009, IEEE Transactions on Power Electronics.

[15]  Haiwei Cai,et al.  A GaN based Dual Active Bridge Converter for Energy Storage Systems , 2018, 2018 IEEE Energy Conversion Congress and Exposition (ECCE).

[16]  H. Akagi,et al.  A Bidirectional Isolated DC–DC Converter as a Core Circuit of the Next-Generation Medium-Voltage Power Conversion System , 2007, IEEE Transactions on Power Electronics.

[17]  Alberto Rodriguez,et al.  Different purpose design strategies and techniques to improve the performance of a Dual Active Bridge with phase-shift control , 2014, 2014 IEEE 15th Workshop on Control and Modeling for Power Electronics (COMPEL).

[18]  Jun Huang,et al.  Unified Triple-Phase-Shift Control to Minimize Current Stress and Achieve Full Soft-Switching of Isolated Bidirectional DC–DC Converter , 2016, IEEE Transactions on Industrial Electronics.

[19]  Bo-Hyung Cho,et al.  Fundamental Duty Modulation of Dual-Active-Bridge Converter for Wide-Range Operation , 2016, IEEE Transactions on Power Electronics.

[20]  D.M. Divan,et al.  A three-phase soft-switched high power density DC/DC converter for high power applications , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[21]  Santanu Kapat,et al.  Discrete-time framework for digital control design in a high-frequency dual active bridge converter , 2018, 2018 IEEE Applied Power Electronics Conference and Exposition (APEC).

[22]  Hengsi Qin,et al.  Generalized Average Modeling of Dual Active Bridge DC–DC Converter , 2012, IEEE Transactions on Power Electronics.

[23]  G.O. Garcia,et al.  Switching Control Strategy to Minimize Dual Active Bridge Converter Losses , 2009, IEEE Transactions on Power Electronics.