Selective electron beam manufactured Ti-6Al-4V lattice structures for orthopedic implant applications: Current status and outstanding challenges

[1]  Y. Y. Sun,et al.  Layer Additive Production or Manufacturing of Thick Sections of Ti-6Al-4V by Selective Electron Beam Melting (SEBM) , 2017 .

[2]  M. Messner,et al.  Mapping local deformation behavior in single cell metal lattice structures , 2017 .

[3]  Wei Wang,et al.  Compressive and fatigue behavior of beta-type titanium porous structures fabricated by electron beam melting , 2017 .

[4]  L. Murr.  Open-cellular metal implant design and fabrication for biomechanical compatibility with bone using electron beam melting. , 2017, Journal of the mechanical behavior of biomedical materials.

[5]  M. Qian,et al.  Microstructure, Mechanical Properties, and Flatness of SEBM Ti-6Al-4V Sheet in As-Built and Hot Isostatically Pressed Conditions , 2017 .

[6]  Carolin Körner,et al.  Fabrication and characterisation of a fully auxetic 3D lattice structure via selective electron beam melting , 2017 .

[7]  R. Dendievel,et al.  Geometrical control of lattice structures produced by EBM through chemical etching: Investigations at the scale of individual struts , 2016 .

[8]  Xiaoyu Zheng,et al.  Multiscale metallic metamaterials. , 2016, Nature materials.

[9]  Guilhem Martin,et al.  Improving the mechanical efficiency of electron beam melted titanium lattice structures by chemical etching , 2016 .

[10]  R. Misra,et al.  The influence of cell morphology on the compressive fatigue behavior of Ti-6Al-4V meshes fabricated by electron beam melting. , 2016, Journal of the mechanical behavior of biomedical materials.

[11]  Martin Leary,et al.  Selective laser melting (SLM) of AlSi12Mg lattice structures , 2016 .

[12]  C. Körner,et al.  Additive manufacturing of metallic components by selective electron beam melting — a review , 2016 .

[13]  Philip J. Withers,et al.  The effect of defects on the mechanical response of Ti-6Al-4V cubic lattice structures fabricated by electron beam melting , 2016 .

[14]  R. Dehoff,et al.  Effects of the microstructure and porosity on properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM) , 2016 .

[15]  Philip J. Withers,et al.  The Effectiveness of Hot Isostatic Pressing for Closing Porosity in Titanium Parts Manufactured by Selective Electron Beam Melting , 2016, Metallurgical and Materials Transactions A.

[16]  Iain Todd,et al.  Dimensional accuracy of Electron Beam Melting (EBM) additive manufacture with regard to weight optimized truss structures , 2016 .

[17]  Wai Yee Yeong,et al.  Laser and electron‐beam powder‐bed additive manufacturing of metallic implants: A review on processes, materials and designs , 2016, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[18]  J Kadkhodapour,et al.  Numerical simulation of the fatigue behavior of additive manufactured titanium porous lattice structures. , 2016, Materials science & engineering. C, Materials for biological applications.

[19]  Wei Xu,et al.  Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review. , 2016, Biomaterials.

[20]  Tomiharu Matsushita,et al.  Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment. , 2016, Materials science & engineering. C, Materials for biological applications.

[21]  Rajiv S. Mishra,et al.  Spatially dependent properties in a laser additive manufactured Ti–6Al–4V component , 2016 .

[22]  Jack Beuth,et al.  Evaluating the Effect of Processing Parameters on Porosity in Electron Beam Melted Ti-6Al-4V via Synchrotron X-ray Microtomography , 2016 .

[23]  D. Pasini,et al.  High-strength porous biomaterials for bone replacement: A strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints. , 2016, Acta biomaterialia.

[24]  Martin Leary,et al.  The Influence of As-Built Surface Conditions on Mechanical Properties of Ti-6Al-4V Additively Manufactured by Selective Electron Beam Melting , 2016 .

[25]  J. Erlebacher,et al.  Size Effects in the Mechanical Properties of Bulk Bicontinuous Ta/Cu Nanocomposites Made by Liquid Metal Dealloying , 2016 .

[26]  Yi Li,et al.  Functionally Graded Ti‐6Al‐4V Meshes with High Strength and Energy Absorption , 2016 .

[27]  Radovan Kovacevic,et al.  Fatigue properties of a dental implant produced by electron beam melting® (EBM) , 2015 .

[28]  M. Bezuidenhout,et al.  Titanium-Based Hip Stems with Drug Delivery Functionality through Additive Manufacturing , 2015, BioMed research international.

[29]  Frédéric Vignat,et al.  Mechanical equivalent diameter of single struts for the stiffness prediction of lattice structures produced by Electron Beam Melting , 2015 .

[30]  Martin Leary,et al.  Deformation and failure behaviour of Ti-6Al-4V lattice structures manufactured by selective laser melting (SLM) , 2015 .

[31]  L. Dobrzański,et al.  Selective Laser Sintering And Melting of Pristine Titanium and Titanium Ti6Al4V Alloy Powders and Selection of Chemical Environment for Etching of Such Materials , 2015 .

[32]  Li Yang,et al.  Mechanical properties of 3D re-entrant honeycomb auxetic structures realized via additive manufacturing , 2015 .

[33]  Jacopo Buongiorno,et al.  Critical heat flux maxima during boiling crisis on textured surfaces , 2015, Nature Communications.

[34]  G. A. Longhitano,et al.  Surface Finishes for Ti-6Al-4V Alloy Produced by Direct Metal Laser Sintering , 2015 .

[35]  Peng Xiu,et al.  Enhanced angiogenesis and osteogenesis in critical bone defects by the controlled release of BMP-2 and VEGF: implantation of electron beam melting-fabricated porous Ti6Al4V scaffolds incorporating growth factor-doped fibrin glue , 2015, Biomedical materials.

[36]  Galina Kasperovich,et al.  Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting , 2015 .

[37]  D. StJohn,et al.  Microstructure and Mechanical Properties of Long Ti-6Al-4V Rods Additively Manufactured by Selective Electron Beam Melting Out of a Deep Powder Bed and the Effect of Subsequent Hot Isostatic Pressing , 2015, Metallurgical and Materials Transactions A.

[38]  M. Qian,et al.  Creation of bimodal porous copper materials by an annealing-electrochemical dealloying approach , 2015 .

[39]  Iain Todd,et al.  XCT analysis of the influence of melt strategies on defect population in Ti?6Al?4V components manufactured by Selective Electron Beam Melting , 2015 .

[40]  S. M. Ahmadi,et al.  Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials. , 2015, Journal of the mechanical behavior of biomedical materials.

[41]  O. Harrysson,et al.  Powder Removal from Ti-6Al-4V Cellular Structures Fabricated via Electron Beam Melting , 2015 .

[42]  J. Kruth,et al.  Effects of build orientation and heat treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structures , 2015 .

[43]  P. Drescher,et al.  Cellular Ti6Al4V with carbon nanotube-like structures fabricated by selective electron beam melting , 2014 .

[44]  J. Grotowski,et al.  High specific strength and stiffness structures produced using selective laser melting , 2014 .

[45]  Brent Stucker,et al.  Analysis of defect generation in Ti–6Al–4V parts made using powder bed fusion additive manufacturing processes , 2014 .

[46]  Ola L. A. Harrysson,et al.  Flexural properties of Ti6Al4V rhombic dodecahedron open cellular structures fabricated with electron beam melting , 2014 .

[47]  David W. Rosen,et al.  Effective mechanical properties of lattice material fabricated by material extrusion additive manufacturing , 2014 .

[48]  L. Murr,et al.  Influence of cell shape on mechanical properties of Ti-6Al-4V meshes fabricated by electron beam melting method. , 2014, Acta biomaterialia.

[49]  E. Garboczi,et al.  Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control , 2014, Journal of research of the National Institute of Standards and Technology.

[50]  M. Dargusch,et al.  Review of effect of oxygen on room temperature ductility of titanium and titanium alloys , 2014 .

[51]  Gwendolen C. Reilly,et al.  Fabrication and Mechanical Characterisation of Titanium Lattices with Graded Porosity , 2014 .

[52]  Radovan Kovacevic,et al.  The bio-compatible dental implant designed by using non-stochastic porosity produced by Electron Beam Melting® (EBM) , 2014 .

[53]  R. Dendievel,et al.  Towards stiffness prediction of cellular structures made by electron beam melting (EBM) , 2014 .

[54]  T. Niendorf,et al.  Lattice Structures Manufactured by SLM: On the Effect of Geometrical Dimensions on Microstructure Evolution During Processing , 2014, Metallurgical and Materials Transactions B.

[55]  Lingzhou Zhao,et al.  Antibacterial effects and biocompatibility of titanium surfaces with graded silver incorporation in titania nanotubes. , 2014, Biomaterials.

[56]  N. Kawazoe,et al.  Pore size effect of collagen scaffolds on cartilage regeneration. , 2014, Acta biomaterialia.

[57]  M. Dargusch,et al.  A transmission electron microscopy and three-dimensional atom probe study of the oxygen-induced fine microstructural features in as-sintered Ti–6Al–4V and their impacts on ductility , 2014 .

[58]  Liang Hao,et al.  Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser melting , 2014 .

[59]  S. Qu,et al.  New Developments of Ti-Based Alloys for Biomedical Applications , 2014, Materials.

[60]  T. Wada,et al.  Sub-micron porous niobium solid electrolytic capacitor prepared by dealloying in a metallic melt , 2014 .

[61]  Joakim Karlsson,et al.  Characterization and comparison of materials produced by Electron Beam Melting (EBM) of two different Ti-6Al-4V powder fractions , 2013 .

[62]  A. A. Zadpoor,et al.  Fatigue behavior of porous biomaterials manufactured using selective laser melting. , 2013, Materials science & engineering. C, Materials for biological applications.

[63]  André Luiz Jardini,et al.  Microstructure and mechanical behavior of porous Ti-6Al-4V parts obtained by selective laser melting. , 2013, Journal of the mechanical behavior of biomedical materials.

[64]  Martine Wevers,et al.  Surface Roughness and Morphology Customization of Additive Manufactured Open Porous Ti6Al4V Structures , 2013, Materials.

[65]  A. A. Zadpoor,et al.  Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing , 2013 .

[66]  J. Ziaja.  Titanium Alloys - Advances in Properties Control , 2013 .

[67]  T. Wada,et al.  Three-dimensional open-cell macroporous iron, chromium and ferritic stainless steel , 2013 .

[68]  A. A. Zadpoor,et al.  Selective laser melting‐produced porous titanium scaffolds regenerate bone in critical size cortical bone defects , 2013, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[69]  R. Everson,et al.  Surface roughness analysis, modelling and prediction in selective laser melting , 2013 .

[70]  H. Jiang,et al.  Effect of microstructure on the fatigue properties of Ti-6Al-4V titanium alloys , 2013 .

[71]  Q. Zhai,et al.  Microstructure and phase evolution during the dealloying of bi-phase Al-Ag alloy , 2013 .

[72]  Robert L. Mason,et al.  Fatigue Life of Titanium Alloys Fabricated by Additive Layer Manufacturing Techniques for Dental Implants , 2013, Metallurgical and Materials Transactions A.

[73]  Li Yang,et al.  Modeling of uniaxial compression in a 3D periodic re-entrant lattice structure , 2013, Journal of Materials Science.

[74]  L. Murr,et al.  Compression deformation behavior of Ti-6Al-4V alloy with cellular structures fabricated by electron beam melting. , 2012, Journal of the mechanical behavior of biomedical materials.

[75]  Yun Luo,et al.  Preparation and characterization of porous Ti6Al4V/alginate hybrid implant by combination of electron beam melting and freeze-drying , 2012 .

[76]  Anders Snis,et al.  Effect of process parameters settings and thickness on surface roughness of EBM produced Ti‐6Al‐4V , 2012 .

[77]  Michael Stingl,et al.  Mechanical characterisation of a periodic auxetic structure produced by SEBM , 2012 .

[78]  H Van Oosterwyck,et al.  The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds. , 2012, Acta biomaterialia.

[79]  Xibing Gong,et al.  Review on powder-based electron beam additive manufacturing technology , 2012 .

[80]  Martine Wevers,et al.  Surface Modification of Ti6Al4V Open Porous Structures Produced by Additive Manufacturing , 2012 .

[81]  Li Yang,et al.  Compressive properties of Ti–6Al–4V auxetic mesh structures made by electron beam melting , 2012 .

[82]  Yang Hao,et al.  Compression fatigue behavior of Ti-6Al-4V mesh arrays fabricated by electron beam melting , 2012 .

[83]  Carolin Körner,et al.  Compression-compression fatigue of selective electron beam melted cellular titanium (Ti-6Al-4V). , 2011, Journal of biomedical materials research. Part B, Applied biomaterials.

[84]  L. Murr,et al.  Microstructure and mechanical properties of open-cellular biomaterials prototypes for total knee replacement implants fabricated by electron beam melting. , 2011, Journal of the mechanical behavior of biomedical materials.

[85]  T. Wada,et al.  Nano- to submicro-porous β-Ti alloy prepared from dealloying in a metallic melt , 2011 .

[86]  R. Dabrowski.  The Kinetics of Phase Transformations During Continuous Cooling of the Ti6Al4V Alloy from the Single-Phase β Range , 2011 .

[87]  S. Raman,et al.  A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications , 2011 .

[88]  Hongwei Ni,et al.  Antibacterial nano-structured titania coating incorporated with silver nanoparticles. , 2011, Biomaterials.

[89]  L. Murr,et al.  Open-Cellular Co-Base and Ni-Base Superalloys Fabricated by Electron Beam Melting , 2011, Materials.

[90]  Mechanical Behavior of Non-Stochastic Ti-6Al-4V Cellular Structures Produced via Electron Beam Melting (EBM). , 2011 .

[91]  W. Cantwell,et al.  The Influence of Processing Parameters on the Mechanical Properties of Selectively Laser Melted Stainless Steel Microlattice Structures , 2010 .

[92]  Hong Hu,et al.  A review on auxetic structures and polymeric materials , 2010 .

[93]  L. Murr,et al.  Next-generation biomedical implants using additive manufacturing of complex, cellular and functional mesh arrays , 2010, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[94]  Shivakumar Raman,et al.  Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM). , 2010, Journal of the mechanical behavior of biomedical materials.

[95]  R. Singer,et al.  Auxetic cellular structures through selective electron‐beam melting , 2010 .

[96]  Colin R. Burvill,et al.  Applicability of published data for fatigue-limited design , 2009 .

[97]  P. Fox,et al.  The development of a scanning strategy for the manufacture of porous biomaterials by selective laser melting , 2009, Journal of materials science. Materials in medicine.

[98]  A. Singh,et al.  Ti based biomaterials, the ultimate choice for orthopaedic implants – A review , 2009 .

[99]  Wenguang Zhang,et al.  Fabrication and characterization of porous Ti6Al4V parts for biomedical applications using electron beam melting process , 2009 .

[100]  Ola L. A. Harrysson,et al.  Properties of Ti–6Al–4V non-stochastic lattice structures fabricated via electron beam melting , 2008 .

[101]  Robert F. Singer,et al.  Selective Electron Beam Melting of Cellular Titanium: Mechanical Properties , 2008 .

[102]  R. Singer,et al.  Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting. , 2008, Acta biomaterialia.

[103]  Peter Zioupos,et al.  Fatigue strength of human cortical bone: age, physical, and material heterogeneity effects. , 2008, Journal of biomedical materials research. Part A.

[104]  Jeroen Rouwkema,et al.  Vascularization in tissue engineering. , 2008, Trends in biotechnology.

[105]  O. Harrysson,et al.  Direct metal fabrication of titanium implants with tailored materials and mechanical properties using electron beam melting technology , 2008 .

[106]  Robert F. Singer,et al.  Cellular Titanium by Selective Electron Beam Melting , 2007 .

[107]  S. Ferguson,et al.  Biomechanical evaluation of the interfacial strength of a chemically modified sandblasted and acid-etched titanium surface. , 2006, Journal of biomedical materials research. Part A.

[108]  D. Cormier,et al.  An Evaluation of Non-Stochastic Lattice Structures Fabricated Via Electron Beam Melting , 2006 .

[109]  V. Poon,et al.  Antimicrobial activities of silver dressings: an in vitro comparison. , 2006, Journal of medical microbiology.

[110]  M. Ashby.  The properties of foams and lattices , 2006, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[111]  G. Bergmann,et al.  Material properties of femoral cancellous bone in axial loading , 2004, Archives of orthopaedic and traumatic surgery.

[112]  A Wennerberg,et al.  Determining optimal surface roughness of TiO(2) blasted titanium implant material for attachment, proliferation and differentiation of cells derived from human mandibular alveolar bone. , 2001, Clinical oral implants research.

[113]  J. Amédée,et al.  Effect of surface roughness of the titanium alloy Ti-6Al-4V on human bone marrow cell response and on protein adsorption. , 2001, Biomaterials.

[114]  H. Takita,et al.  Geometry of Carriers Controlling Phenotypic Expression in BMP-Induced Osteogenesis and Chondrogenesis , 2001, The Journal of bone and joint surgery. American volume.

[115]  A. Karma,et al.  Evolution of nanoporosity in dealloying , 2001, Nature.

[116]  M. Ashby,et al.  Metal Foams: A Design Guide , 2000 .

[117]  K. Evans,et al.  Auxetic Materials : Functional Materials and Structures from Lateral Thinking! , 2000 .

[118]  M. Dalstra,et al.  Age variations in the properties of human tibial trabecular bone and cartilage , 1997, Acta orthopaedica Scandinavica. Supplementum.

[119]  T. Nicholas,et al.  Notch size effects in HCF behavior of Ti–6Al–4V , 1999 .

[120]  H. J. Rack,et al.  Phase transformations during cooling in α+β titanium alloys , 1998 .

[121]  P Zioupos,et al.  Mechanical properties and the hierarchical structure of bone. , 1998, Medical engineering & physics.

[122]  Jonathan Black,et al.  Handbook of Biomaterial Properties , 1998, Springer US.

[123]  Ming Ding,et al.  Age variations in the properties of human tibial trabecular bone. , 1997, The Journal of bone and joint surgery. British volume.

[124]  H. Takita,et al.  Pore size of porous hydroxyapatite as the cell-substratum controls BMP-induced osteogenesis. , 1997, Journal of biochemistry.

[125]  C. Colton,et al.  Implantable biohybrid artificial organs. , 1995, Cell transplantation.

[126]  S A Goldstein,et al.  A comparison of the fatigue behavior of human trabecular and cortical bone tissue. , 1992, Journal of biomechanics.

[127]  N. Blumenthal,et al.  Inhibition of apatite formation by titanium and vanadium ions. , 1989, Journal of biomedical materials research.

[128]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .

[129]  M. Panjabi,et al.  A Study of the Compressive Properties of Lumbar Vertebral Trabeculae: Effects of Tissue Characteristics , 1987, Spine.

[130]  L. Mosekilde,et al.  Biomechanical competence of vertebral trabecular bone in relation to ash density and age in normal individuals. , 1987, Bone.

[131]  Michael F. Ashby,et al.  Deformation and energy absorption diagrams for cellular solids , 1984 .

[132]  Michael F. Ashby,et al.  The mechanical properties of cellular solids , 1983 .

[133]  M. Ashby,et al.  The mechanics of three-dimensional cellular materials , 1982, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[134]  F. G. Evans,et al.  Mechanical properties and histology of cortical bone from younger and older men , 1976, The Anatomical Record.

[135]  O Lindahl,et al.  Mechanical properties of dried defatted spongy bone. , 1976, Acta orthopaedica Scandinavica.

[136]  M Martens,et al.  Aging of bone tissue: mechanical properties. , 1976, The Journal of bone and joint surgery. American volume.

[137]  G. Menges,et al.  Estimation of mechanical properties for rigid polyurethane foams , 1975 .

[138]  J. Folkman,et al.  SELF-REGULATION OF GROWTH IN THREE DIMENSIONS , 1973, The Journal of experimental medicine.

[139]  O Lindahl,et al.  Cortical bone in man. II. Variation in tensile strength with age and sex. , 1967, Acta orthopaedica Scandinavica.

[140]  O Lindahl,et al.  Cortical bone in man. 1. Variation of the amount and density with age and sex. , 1967, Acta orthopaedica Scandinavica.