Automatic folding of cartons using a reconfigurable robotic system

This paper proposes new theories and methodology for the study of folding carton and reconfigurable packaging systems and presents both virtual and experimental systems to support the theories. Equivalent mechanisms of cartons were established by describing carton creases as joints and carton panels as links. With the analysis of the equivalent mechanism, the gusset vertexes of cartons were analyzed based on their equivalent spherical linkages and were identified as guiding linkages that determine folding. A reconfigurable robotic system was developed to demonstrate the ability to erect diverted cartons in the reconfigurable packaging system which could previously only be achieved manually.

[1]  Jian S. Dai,et al.  Dexterous Manipulation of Origami Cartons With Robotic Fingers Based on the Interactive Configuration Space , 2008 .

[2]  Jason H. Cantarella,et al.  NONTRIVIAL EMBEDDINGS OF POLYGONAL INTERVALS AND UNKNOTS IN 3-SPACE , 1998 .

[3]  Devin J. Balkcom,et al.  Introducing robotic origami folding , 2004, IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004.

[4]  Devin J. Balkcom,et al.  Robotic origami folding , 2008, Int. J. Robotics Res..

[5]  Sue Whitesides,et al.  Reconfiguring closed polygonal chains in Euclideand-space , 1995, Discret. Comput. Geom..

[6]  Jian S. Dai,et al.  Carton manipulation analysis using configuration transformation , 2002 .

[7]  David A. Huffman,et al.  Curvature and Creases: A Primer on Paper , 1976, IEEE Transactions on Computers.

[8]  Jian S. Dai,et al.  Orientation capability of planar serial manipulators using rotatability analysis based on workspace decomposition , 2002 .

[9]  Joseph O'Rourke,et al.  Polygonal chains cannot lock in 4d , 1999, CCCG.

[10]  Jeffrey C. Trinkle,et al.  Complete Path Planning for Closed Kinematic Chains with Spherical Joints , 2002, Int. J. Robotics Res..

[11]  J. Dai.  An historical review of the theoretical development of rigid body displacements from Rodrigues parameters to the finite twist , 2006 .

[12]  M. Bergamasco,et al.  Dynamics of parallel manipulators by means of screw theory , 2003 .

[13]  Devin J. Balkcom,et al.  Folding Paper Shopping Bags , 2006 .

[14]  Liang Lu,et al.  Folding cartons with fixtures: a motion planning approach , 1999, IEEE Trans. Robotics Autom..

[15]  Lydia E. Kavraki,et al.  A probabilistic roadmap approach for systems with closed kinematic chains , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[16]  Jian S. Dai,et al.  Kinematics and mobility analysis of carton folds in packing manipulation based on the mechanism equivalent , 2002 .

[17]  Jian S. Dai,et al.  An approach to carton-folding trajectory planning using dual robotic fingers , 2003, Robotics Auton. Syst..

[18]  Jian S. Dai,et al.  Mobility analysis of a complex structured ball based on mechanism decomposition and equivalent screw system analysis , 2004 .

[19]  Jian S. Dai,et al.  A six-component contact force measurement device based on the Stewart platform , 2000 .

[20]  J. Dai,et al.  Mobility in Metamorphic Mechanisms of Foldable/Erectable Kinds , 1998 .

[21]  Jian S. Dai,et al.  A packaging robot for complex cartons , 2006, Ind. Robot.

[22]  Erik D. Demaine,et al.  Locked and unlocked polygonal chains in 3D , 1998, SODA '99.

[23]  Bill Stewart,et al.  Packaging as an effective marketing tool , 1996 .

[24]  J. R. Jones,et al.  Matrix Representation of Topological Changes in Metamorphic Mechanisms , 2005 .