Efficient Equilibrium Testing under Adhesion and Anisotropy using Empirical Contact Force Models

[1]  Soo-Hong Lee,et al.  Fixture planning with friction , 1991 .

[2]  Andy Ruina,et al.  Limit surface and moment function descriptions of planar sliding , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[3]  Michaël Gauthier,et al.  Experimental validation of in-hand planar orientation and translation in microscale , 2016, Intell. Serv. Robotics.

[4]  Vijay Kumar,et al.  Robotic grasping and contact: a review , 2000, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065).

[5]  Mark R. Cutkosky,et al.  Dynamic surface grasping with directional adhesion , 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[6]  Mark R. Cutkosky,et al.  Scaling Hard Vertical Surfaces with Compliant Microspine Arrays , 2006, Int. J. Robotics Res..

[7]  Benjamin Müller,et al.  The SCIP Optimization Suite 3.2 , 2016 .

[8]  Stephen P. Boyd,et al.  Fast Computation of Optimal Contact Forces , 2007, IEEE Transactions on Robotics.

[9]  Timothy Bretl,et al.  Testing Static Equilibrium for Legged Robots , 2008, IEEE Transactions on Robotics.

[10]  David E. Stewart,et al.  Rigid-Body Dynamics with Friction and Impact , 2000, SIAM Rev..

[11]  Imin Kao,et al.  Modeling of Viscoelastic Contacts and Evolution of Limit Surface for Robotic Contact Interface , 2007, IEEE Transactions on Robotics.

[12]  Alberto Rodriguez,et al.  Experimental Validation of Contact Dynamics for In-Hand Manipulation , 2016, ISER.