Singularity analysis of a class of composite serial in-parallel robots

This paper presents the singularity analysis of a family of 14 composite serial in-parallel six degree-of-freedom robots, having a common parallel sub-mechanism. The singular configurations of this class of robots are obtained by applying line geometry methods to a single, augmented Jacobian matrix whose rows are Plucker coordinates of the lines governing the sub-mechanism motion. It is shown that this family of robots possesses three general parallel singularities that are attributed to the general complex singularity. The results were verified experimentally on a prototype of a composite serial in-parallel robot that was synthesized and constructed for use in medical applications.

[1]  K. H. Hunt,et al.  The Octahedral Manipulator: Geometry and Mobility , 1998, Int. J. Robotics Res..

[2]  Jean-Pierre Merlet,et al.  Singular Configurations of Parallel Manipulators and Grassmann Geometry , 1988, Int. J. Robotics Res..

[3]  J. Michael McCarthy,et al.  Conditions for line-based singularities in spatial platform manipulators , 1998, J. Field Robotics.

[4]  Hyung Suck Cho,et al.  Analysis of a Novel 6-DOF, 3-PPSP Parallel Manipulator , 1997, Int. J. Robotics Res..

[5]  Alain Dandurand The Rigidity of Compound Spatial Grids , 1984 .

[6]  F. Park,et al.  Singularity Analysis of Closed Kinematic Chains , 1999 .

[7]  R. G. Fenton,et al.  A Unifying Framework for Classification and Interpretation of Mechanism Singularities , 1995 .

[8]  L. W. Tsai,et al.  The Jacobian Analysis of a Parallel Manipulator Using Reciprocal Screws , 1998 .

[9]  Jean-Pierre Merlet,et al.  Direct Kinematics and Assembly Modes of Parallel Manipulators , 1992 .

[10]  Jean-Pierre Merlet,et al.  Parallel manipulators. Part 2 : Theory. Singular configurations and Grassmann geometry , 1988 .

[11]  Lung-Wen Tsai Jacobian and stiffness analysis of a novel class of six-DOF parallel minimanipulators , 1992 .

[12]  Jean-Pierre Merlet Singular Configurations of Parallel Manipulators and Grassmann Geometry , 1989, Int. J. Robotics Res..

[13]  W. C. Graustein,et al.  Introduction to higher geometry , 1933 .

[14]  Leila Notash,et al.  Forward displacement analysis and uncertainty configurations of parallel manipulators with a redundant branch , 1996 .

[15]  R. W. Daniel,et al.  A fast, robust solution to the Stewart platform forward kinematics , 1996, J. Field Robotics.

[16]  D. M. Y. Sommerville,et al.  Analytical geometry of three dimensions , 1934 .

[17]  K. H. Hunt,et al.  Kinematic geometry of mechanisms , 1978 .

[18]  Helmut Pottmann,et al.  An introduction to line geometry with applications , 1999, Comput. Aided Des..

[19]  L. W. Tsai,et al.  Robot Analysis: The Mechanics of Serial and Parallel Ma-nipulators , 1999 .

[20]  Moshe Shoham,et al.  Robot Construction for Surgical Applications , 2000 .

[21]  Joseph Duffy,et al.  A forward and reverse displacement analysis of a 6-DOF in-parallel manipulator , 1994 .

[22]  Leila Notash Uncertainty configurations of parallel manipulators , 1998 .

[23]  Clément Gosselin,et al.  Singularity analysis of closed-loop kinematic chains , 1990, IEEE Trans. Robotics Autom..

[24]  Damien Chablat,et al.  Working modes and aspects in fully parallel manipulators , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).

[25]  Kenneth H. Hunt,et al.  Special Configurations of Multi-finger Multi- freedom Grippers — A Kinematic Study , 1991, Int. J. Robotics Res..

[26]  Ashitava Ghosal,et al.  Singularity Analysis of Platform-type Multi-loop Spatial Mechanisms , 1997 .

[27]  Leila Notash,et al.  Forward displacement analysis and uncertainty configurations of parallel manipulators with a redundant branch , 1996, J. Field Robotics.

[28]  E F Fichter,et al.  A Stewart Platform- Based Manipulator: General Theory and Practical Construction , 1986 .

[29]  Jack Phillips,et al.  Freedom in machinery , 1984 .

[30]  Daniel Glozman,et al.  Design considerations of new six degrees-of-freedom parallel robots , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).

[31]  K. H. Hunt,et al.  Structural Kinematics of In-Parallel-Actuated Robot-Arms , 1983 .

[32]  Peter Ross McAree,et al.  A fast, robust solution to the Stewart platform forward kinematics , 1996 .

[33]  Curtis L. Collins,et al.  The singularity analysis of an in-parallel hand controller for force-reflected teleoperation , 1995, IEEE Trans. Robotics Autom..

[34]  F. Tahmasebi,et al.  Workspace and Singularity Analysis of a Novel Six-DOF Parallel Minimanipulator , 1993 .

[35]  Branislav Borovac,et al.  Mechanics of turin parallel robot , 1995 .