Load management: Model-based control of aggregate power for populations of thermostatically controlled loads

Abstract Large groups of electrical loads can be controlled as a single entity to reduce their aggregate power demand in the electricity network. This approach, known as load management (LM) or demand response, offers an alternative to the traditional paradigm in the electricity market, where matching supply and demand is achieved solely by regulating how much generation is dispatched. Thermostatically controlled loads (TCLs), such as air conditioners (ACs) and fridges, are particularly suitable for LM, which can be implemented using feedback control techniques to regulate their aggregate power. To achieve high performance, such feedback control techniques require an accurate mathematical model of the TCL aggregate dynamics. Although such models have been developed, they appear too complex to be effectively used in control design. In this paper we develop a mathematical model aimed at the design of a model-based feedback control strategy. The proposed model analytically characterises the aggregate power response of a population of ACs to a simultaneous step change in temperature set points. Based on this model, we then derive, and completely parametrise in terms of the ACs ensemble properties, a reduced-order mathematical model to design an internal-model controller that regulates aggregate power by broadcasting temperature set-point offset changes. The proposed controller achieves high LM performance provided the ACs are equipped with high resolution thermostats. With coarser resolution thermostats, which are typical in present commercial and residential ACs, performance deteriorates significantly. This limitation is overcome by subdividing the population into clusters of ACs that receive a coarse-grained, cluster-dependent control signal. The proposed clustering technique recovers the performance achieved with high resolution thermostats at the expense of some additional comfort penalty, which can be quantified using the controller output.

[1]  Scott Backhaus,et al.  Modeling and control of thermostatically controlled loads , 2011 .

[2]  S. El-Ferik,et al.  Identification of physically based models of residential air-conditioners for direct load control management , 2004, 2004 5th Asian Control Conference (IEEE Cat. No.04EX904).

[3]  J. A. Fuentes,et al.  Probabilistic Characterization of Thermostatically Controlled Loads to Model the Impact of Demand Response Programs , 2011, IEEE Transactions on Power Systems.

[4]  Roland P. Malhamé,et al.  Identification of alternating renewal electric load models from energy measurements , 1994 .

[5]  Federico Bergero,et al.  PowerDEVS: a tool for hybrid system modeling and real-time simulation , 2011, Simul..

[6]  David M. Auslander,et al.  ROBUST CONTROL OF RESIDENTIAL DEMAND RESPONSE NETWORK WITH LOW BANDWIDTH INPUT , 2008 .

[7]  Vice President,et al.  AMERICAN SOCIETY OF HEATING, REFRIGERATION AND AIR CONDITIONING ENGINEERS INC. , 2007 .

[8]  Max Donath,et al.  American Control Conference , 1993 .

[9]  K. Schisler,et al.  The role of demand response in ancillary services markets , 2008, 2008 IEEE/PES Transmission and Distribution Conference and Exposition.

[10]  M. Kintner-Meyer,et al.  Loads Providing Ancillary Services: Review of International Experience , 2008 .

[11]  J. Oyarzabal,et al.  A Direct Load Control Model for Virtual Power Plant Management , 2009, IEEE Transactions on Power Systems.

[12]  Johanna L. Mathieu,et al.  Modeling and Control of Aggregated Heterogeneous Thermostatically Controlled Loads for Ancillary Services , 2011 .

[13]  Lennart Ljung,et al.  System Identification: Theory for the User , 1987 .

[14]  Guy Desaulniers,et al.  A column generation method for optimal load management via control of electric water heaters , 1995 .

[15]  Chee-Yee Chong,et al.  Statistical Synthesis of Physically Based Load Models with Applications to Cold Load Pickup , 1984 .

[16]  Duncan S. Callaway.  Tapping the energy storage potential in electric loads to deliver load following and regulation, with application to wind energy , 2009 .

[17]  B. J. Kirby,et al.  Spinning Reserve From Responsive Loads , 2003 .

[18]  Fred Schweppe,et al.  Physically Based Modeling of Cold Load Pickup , 1981, IEEE Transactions on Power Apparatus and Systems.

[19]  Ian A. Hiskens,et al.  Achieving Controllability of Electric Loads , 2011, Proceedings of the IEEE.

[20]  Refrigerating.  ASHRAE handbook of fundamentals , 1967 .

[21]  R. Malhamé,et al.  Electric load model synthesis by diffusion approximation of a high-order hybrid-state stochastic system , 1985 .

[22]  Zhao Xu,et al.  Demand as Frequency Controlled Reserve , 2011, IEEE Transactions on Power Systems.

[23]  A. Debs,et al.  Statistical synthesis of power system functional load models , 1979, 1979 18th IEEE Conference on Decision and Control including the Symposium on Adaptive Processes.

[24]  N. Lu,et al.  Control strategies of thermostatically controlled appliances in a competitive electricity market , 2005, IEEE Power Engineering Society General Meeting, 2005.

[25]  Graham C. Goodwin,et al.  Control System Design , 2000 .

[26]  Roland Boutros Pierre Malhami.  A statistical approach for modeling a class of power system loads , 1983 .

[27]  Julien Bect,et al.  Generalized Fokker-Planck equation for piecewise-diffusion processes with boundary hitting resets , 2006 .

[28]  Hosam K. Fathy,et al.  Modeling and control insights into demand-side energy management through setpoint control of thermostatic loads , 2011, Proceedings of the 2011 American Control Conference.

[29]  Gene F. Franklin,et al.  Feedback Control of Dynamic Systems , 1986 .