Iterative Feedback Tuning Approach to Development of PI-Fuzzy Controllers

The paper proposes an original development method of Pi-fuzzy controllers. Accepting the controlled plants being described with simplified linear mathematical models, the method starts with linear PI controller development in terms of Iterative Feedback Tuning expressed in discrete-time. It is accompanied by a linear development method applied in delta domain. Next, the results of the linear development are transferred to the development of the fuzzy blocks in PI-fuzzy controllers by the modal equivalence principle, resulting in new two-degree-of-freedom Mamdani Pi-fuzzy controllers. Realtime experimental results in controlling a nonlinear servo-system validate the development method, where the linear development is performed using the Extended Symmetrical Optimum method.

[1]  Chang-Yin Sun,et al.  Stabilizing controller synthesis of delta-operator formulated fuzzy dynamic systems , 2004, Proceedings of 2004 International Conference on Machine Learning and Cybernetics (IEEE Cat. No.04EX826).

[2]  R. Precup,et al.  Genetic Iterative Feedback Tuning (GIFT) Method for Fuzzy Control System Development , 2006, 2006 International Symposium on Evolving Fuzzy Systems.

[3]  T. Fukuda,et al.  Iterative feedback tuning of controllers for a two-mass-spring system with friction , 2003 .

[4]  Stefan Preitl,et al.  Optimisation criteria in development of fuzzy controllers with dynamics , 2004, Eng. Appl. Artif. Intell..

[5]  Stefan Preitl,et al.  An extension of tuning relations after symmetrical optimum method for PI and PID controllers , 1999, Autom..

[6]  Magnus Mossberg,et al.  Iterative feedback tuning of PID parameters: comparison with classical tuning rules , 2003 .

[7]  Shumin Fei,et al.  Separation Principle for Delta-Operator Formulated TS Fuzzy Systems , 2006, 2006 6th World Congress on Intelligent Control and Automation.

[8]  Robert Babuska,et al.  Perspectives of fuzzy systems and control , 2005, Fuzzy Sets Syst..

[9]  James F. Whidborne,et al.  Digital Controller Implementation and Fragility , 2001 .

[10]  Tao Liu,et al.  Analytical design of two-degree-of-freedom control scheme for open-loop unstable processes with time delay , 2005 .

[11]  H. Prochazka,et al.  Iterative Feedback Tuning for robust controller design and optimization , 2005, Proceedings of the 44th IEEE Conference on Decision and Control.

[12]  Graham C. Goodwin,et al.  Control System Design , 2000 .

[13]  Karl Johan Åström,et al.  PID Controllers: Theory, Design, and Tuning , 1995 .

[14]  M. Araki,et al.  Two-Degree-of-Freedom PID Controllers , 2003 .

[15]  S. Preitl,et al.  Development method for low cost fuzzy controlled servosystems , 2006, 2006 IEEE Conference on Computer Aided Control System Design, 2006 IEEE International Conference on Control Applications, 2006 IEEE International Symposium on Intelligent Control.

[16]  Stephen Yurkovich,et al.  Fuzzy Control , 1997 .

[17]  Luca Bascetta,et al.  On the design of the feedforward compensator in two-degree-of-freedom controllers , 2006 .

[18]  Graham C. Goodwin,et al.  Digital control and estimation : a unified approach , 1990 .

[19]  Svante Gunnarsson,et al.  Iterative feedback tuning: theory and applications , 1998 .

[20]  Kehua Ma,et al.  Stabilization of fuzzy delta operator systems , 2003, Proceedings of the 2003 International Conference on Machine Learning and Cybernetics (IEEE Cat. No.03EX693).

[21]  S. Gunnarsson,et al.  A convergent iterative restricted complexity control design scheme , 1994, Proceedings of 1994 33rd IEEE Conference on Decision and Control.

[22]  Byung Soo Moon,et al.  Equivalence between fuzzy logic controllers and PI controllers for single input systems , 1995 .

[23]  Sylvie Galichet,et al.  Fuzzy controllers: synthesis and equivalences , 1995, IEEE Trans. Fuzzy Syst..

[24]  Dr. Hans Hellendoorn,et al.  An Introduction to Fuzzy Control , 1996, Springer Berlin Heidelberg.

[25]  Brian D. O. Anderson,et al.  A model reference approach to safe controller changes in iterative identification and control , 2006, Autom..