Experimental evaluation of a miniature haptic actuator based on electrorheological fluids

Haptic feedback is desired for numerous applications including simulators, teleoperations, entertainment and more. While many devices today feature vibrotactile feedback, most do not provide kinesthetic feedback. To address the need for both vibrotactile and kinesthetic feedback, this study investigates the use of electrorheological (ER) fluids for their tunable viscosity under electrical stimulation. A prototype device containing ER fluid was designed and fabricated. The device operates based on pressure-driven flow of the fluid between charged plates due to user interaction with the touch contact surface. The prototype was tested using a dynamic mechanical analyzer to measure the actuator’s resistive force with respect to indentation depth for a range of applied voltages and frequencies. The results indicate that increasing the applied voltage causes an increase in the force produced by the actuator. Varying the supplied signal over a range of voltages and frequencies can convey a range of force and vibrational feedback. This range is sufficient to transmit distinct haptic sensations to human operators and demonstrates the design’s capability to transmit remote or virtual touch feedback conditions.

[1]  Seung-Bok Choi,et al.  Position control of X–Y table mechanism using electro-rheological clutches , 2000 .

[2]  Nigel W. John,et al.  The Role of Haptics in Medical Training Simulators: A Survey of the State of the Art , 2011, IEEE Transactions on Haptics.

[3]  P. Sheng,et al.  The giant electrorheological effect in suspensions of nanoparticles , 2003, Nature materials.

[4]  Jeong-Hoi Koo,et al.  Application of magnetorheological fluids for a miniature haptic button: Experimental evaluation , 2012 .

[5]  Jan O. Borchers,et al.  MudPad: localized tactile feedback on touch surfaces , 2010, UIST '10.

[6]  Hyuk-Jun Kwon,et al.  Development of a miniature tunable stiffness display using MR fluids for haptic application , 2010 .

[7]  Blake Hannaford,et al.  Stability and Performance of Haptic Displays: Theory and Experiments , 1998, Dynamic Systems and Control.

[8]  Stephen D. Laycock,et al.  Recent Developments and Applications of Haptic Devices , 2003, Comput. Graph. Forum.

[9]  K. Fujita,et al.  A New Softness Display Interface by Dynamic Fingertip Contact Area Control by Dynamic Fingertip Cont , 2001 .

[10]  Oussama Khatib,et al.  A Haptic Teleoperation Approach Based on Contact Force Control , 2006, Int. J. Robotics Res..

[11]  Stephen A. Brewster,et al.  Investigating the effectiveness of tactile feedback for mobile touchscreens , 2008, CHI.

[12]  Aiguo Song,et al.  Haptic telemanipulation of soft environment without direct force feedback , 2005, 2005 IEEE International Conference on Information Acquisition.

[13]  Jun Rekimoto,et al.  Ambient touch: designing tactile interfaces for handheld devices , 2002, UIST '02.

[14]  Cagatay Basdogan,et al.  Haptics in virtual environments: taxonomy, research status, and challenges , 1997, Comput. Graph..

[15]  William A. Bullough,et al.  DYNAMICS OF AN ELECTRORHEOLOGICAL VALVE , 1996 .

[16]  J. Makin,et al.  The Electro-Rheological Clutch: Design, Performance Characteristics and Operation , 1993 .

[17]  Dong-Soo Kwon,et al.  Stability and Performance of Haptic Interfaces with Active/Passive Actuators—Theory and Experiments , 2006, Int. J. Robotics Res..

[18]  W. A. Bullough,et al.  The structure of smart fluids , 1992, Nature.

[19]  Matteo Bianchi,et al.  A new softness display based on bi-elastic fabric , 2009, World Haptics 2009 - Third Joint EuroHaptics conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems.