A Comparative Study of MPCC and MPTC in PMSM Drive System

In this paper, using the two control methods of model predictive control (MPC), model predictive current control (MPCC) and model predictive torque control (MPTC) is applied to the control system of permanent magnet synchronous motor(PMSM). The algorithms are based on the minimization of different cost functions, and the corresponding optimal voltage vector can be obtained. Comparison of the dynamic and steady state performance of the tested PMSM with MPCC and MPTC is elaborated. The delay compensation is considered to reduce the fluctuation of current and torque, in order to reduce the computational burden by using a single vector, comparison of two methods in the speed control system of dynamic and steady-state performance and speed tracking performance and resistance to load disturbance. The simulation results show that both MPCC and MPTC can be well applied to the PMSM driving systems with good speed tracking performance. However the MPCC can achieve less harmonics in the stator currents, and consequently the circular flux linkage trajectory is smoother, while the MPTC shows advantages in smaller ripples in the mechanical torque.

[1]  Yongchang Zhang,et al.  An improved model predictive control for permanent magnet synchronous motor drives , 2016, 2016 IEEE 8th International Power Electronics and Motion Control Conference (IPEMC-ECCE Asia).

[2]  Patricio Cortes Estay,et al.  Predictive control of power converters and electrical drives , 2012 .

[3]  Wei Xu,et al.  Finite-Control-Set Model Predictive Torque Control With a Deadbeat Solution for PMSM Drives , 2015, IEEE Transactions on Industrial Electronics.

[4]  W. Marsden.  I and J , 2012 .

[5]  Joong-Ho Song,et al.  Torque ripple reduction and fast torque response strategy of direct torque control for permanent-magnet synchronous motor , 2013, 2013 IEEE International Symposium on Industrial Electronics.

[6]  M. Ouhrouche,et al.  Robust cascaded nonlinear predictive control of a permanent magnet synchronous motor , 2009, 2009 IEEE International Conference on Industrial Technology.

[7]  Roberto Cárdenas,et al.  Model Predictive Torque Control for Torque Ripple Compensation in Variable-Speed PMSMs , 2016, IEEE Transactions on Industrial Electronics.

[8]  Yongchang Zhang,et al.  Performance Improvement of Model-Predictive Current Control of Permanent Magnet Synchronous Motor Drives , 2017, IEEE Transactions on Industry Applications.

[9]  Jay H. Lee,et al.  Model predictive control: past, present and future , 1999 .

[10]  Changliang Xia,et al.  Torque Ripple Minimization of Predictive Torque Control for PMSM With Extended Control Set , 2017, IEEE Transactions on Industrial Electronics.

[11]  Silverio Bolognani,et al.  Optimal State Reference Computation With Constrained MTPA Criterion for PM Motor Drives , 2015, IEEE Transactions on Power Electronics.

[12]  Marko Bacic,et al.  Model predictive control , 2003 .

[13]  S. Mariethoz,et al.  A model predictive control scheme with torque ripple mitigation for permanent magnet motors , 2009, 2009 35th Annual Conference of IEEE Industrial Electronics.

[14]  Dan Sun,et al.  Simplified MPCC for four-switch three-phase inverter-fed PMSM , 2017 .

[15]  Shihua Li,et al.  Speed Control for PMSM Servo System Using Predictive Functional Control and Extended State Observer , 2012, IEEE Transactions on Industrial Electronics.

[16]  Ondrej Straka,et al.  Efficient MPC for permanent magnet synchronous motor , 2017, 2017 25th Mediterranean Conference on Control and Automation (MED).