Design and implementation of a haptic device for training in urological operations

Virtual reality is becoming very important for training medical surgeons in various operations. Interfacing users with a virtual training environment requires the existence of a properly designed haptic device. This paper presents the design and implementation of a new force feedback haptic mechanism with five active degrees of freedom (DOFs), which is used as part of a training simulator for urological operations. The mechanism consists of a 2-DOF, 5-bar linkage, and a 3-DOF spherical joint, designed to present low friction, inertia and mass, and to be statically balanced. The device is suitable for the accurate application of small forces and moments. All five actuators of the haptic device are base-mounted dc motors and use a force transmission system based on capstan drives, pulleys, and tendons. The paper describes the overall design and sizing considerations, the resulting kinematics and dynamics, the force feedback control algorithm, and the hardware employed. Experimental results are provided.

[1]  Thomas H. Massie,et al.  The PHANToM Haptic Interface: A Device for Probing Virtual Objects , 1994 .

[2]  S. K. Moore,et al.  The virtual surgeon [virtual reality trainer] , 2000 .

[3]  E. Chen,et al.  Force feedback for surgical simulation , 1998, Proc. IEEE.

[4]  Christian Laugier,et al.  A haptic interface for a virtual exam of the human thigh , 2000, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065).

[5]  C Baur,et al.  VIRGY: a virtual reality and force feedback based endoscopic surgery simulator. , 1998, Studies in health technology and informatics.

[6]  John Kenneth Salisbury,et al.  Phantom-Based Haptic Interaction with Virtual Objects , 1997, IEEE Computer Graphics and Applications.

[7]  Roger A. Baumann,et al.  The PantoScope: a spherical remote-center-of-motion parallel manipulator for force reflection , 1997, Proceedings of International Conference on Robotics and Automation.

[8]  Michael Levin,et al.  The design and control of an experimental whole-arm manipulator , 1991 .

[9]  Rajiv V. Dubey,et al.  Development of a robotic haptic interface to assist the performance of vocational tasks by people with disabilities , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[10]  B. Neisius,et al.  The Karlsruhe Endoscopic Surgery Trainer as an example for virtual reality in medical education , 1997 .

[11]  George V. Popescu,et al.  Virtual reality-based training for the diagnosis of prostate cancer , 1999, IEEE Transactions on Biomedical Engineering.

[12]  Dong-Soo Kwon,et al.  Force feedback for a spine biopsy simulator with volume graphic model , 2001, Proceedings 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems. Expanding the Societal Role of Robotics in the the Next Millennium (Cat. No.01CH37180).

[13]  Koichi Hirota,et al.  Virtual cutting with force feedback , 1998, Proceedings. IEEE 1998 Virtual Reality Annual International Symposium (Cat. No.98CB36180).

[14]  Vincent Hayward,et al.  FREEDOM-7: A High Fidelity Seven Axis Haptic Device with Application to Surgical Training , 1997, ISER.

[15]  R. Goertz.  FUNDAMENTALS OF GENERAL-PURPOSE REMOTE MANIPULATORS , 1952 .

[16]  R. Satava.  The Virtual Surgeon , 1998 .