A loop-by-loop defect rectification procedure for optimal synthesis of Stephenson III path generators

This paper presents a formulation of constraints for the synthesis of Stephenson III mechanism and a loop-by-loop defect-rectification procedure. The procedure divides the Stephenson III mechanism into two loops, namely, Loop I, i.e., four-bar, and Loop II, i.e., five-bar mechanisms. Then, the defects are identified using the established methodology to formulate the defect-specific constraints in the simplified form. Based on the constraints, an optimization problem is formulated to synthesize a Stephenson III mechanism for path generation. A well-established meta-heuristic algorithm is used to solve the constrained optimization problem. For demonstrating the effectiveness of the formulated constraints, two numerical examples are considered, in which Stephenson III path generator mechanisms are synthesized. It is found that the mechanisms synthesized using the proposed procedure are defect-free when constraints are imposed, which is verified using the stick-diagram.

[1]  B. Parrish,et al.  Identification of a Usable Six-Bar Linkage for Dimensional Synthesis , 2013 .

[2]  Shawn R. Wilhelm,et al.  Solution rectification of slider-crank mechanisms with transmission angle control , 2017 .

[3]  Wen-Tzong Lee,et al.  On Adjustable Planar Four-Bar Motion Generation With Order, Branch and Circuit Defect Rectification , 2015 .

[4]  Jesus Maria Blanco,et al.  A general method for the optimal synthesis of mechanisms using prescribed instant center positions , 2016 .

[5]  Kenneth J. Waldron,et al.  Elimination of Branch, Grashof, and Order Defects in Path-Angle Generation and Function Generation Synthesis , 1979 .

[6]  Hong-Sen Yan,et al.  Optimal Synthesis of Cam-Linkage Mechanisms for Precise Path Generation , 2006 .

[7]  R. Venkata Rao,et al.  Teaching–Learning-based Optimization Algorithm , 2016 .

[8]  Wen Miin Hwang,et al.  Defect-Free Synthesis of Stephenson-II Function Generators , 2010 .

[9]  Hiroaki Katoh,et al.  Identification of motion domains of planar six-link mechanisms of the Stephenson-type , 2004 .

[10]  Kwun-Lon Ting,et al.  Five-Bar Grashof Criteria , 1986 .

[11]  Kaustubh H. Sonawale,et al.  Computer Aided Design of Useful Spherical Watt I Six-Bar Linkages , 2013 .

[12]  S. M. Varedi,et al.  Optimal free-defect synthesis of four-bar linkage with joint clearance using PSO algorithm , 2013 .

[13]  Carlos A. Felippa.  A contour-line printplotter for finite element work , 1979 .

[14]  J. Michael McCarthy,et al.  Numerical Synthesis of Six-Bar Linkages for Mechanical Computation , 2014 .

[15]  E. Filemon,et al.  Useful ranges of centerpoint curves for design of crank-and-rocker linkages☆ , 1972 .

[16]  Gianluca Gatti,et al.  Optimized five-bar linkages with non-circular gears for exact path generation , 2009 .

[17]  Hong-Sen Yan,et al.  AN ALGORITHM FOR THE OPTIMAL SYNTHESIS OF COMPLEX FUNCTION GENERATORS , 1987 .

[18]  Thomas R. Chase,et al.  Circuit analysis of watt chain six-bar mechanisms , 1990 .

[19]  Shrinivas S. Balli,et al.  Defects in link mechanisms and solution rectification , 2002 .

[20]  John A. Mirth.  The Application of Geometric Constraint Programming to the Design of Motion Generating Six-Bar Linkages , 2012 .

[21]  Kenneth J. Waldron,et al.  Graphical Solution of the Branch and Order Problems of Linkage Synthesis for Multiply Separated Positions , 1977 .

[22]  D. A. Turcic,et al.  A General Method of Determining and Eliminating Branching in Planar Multiloop Mechanisms , 1988 .

[23]  Wen Miin Hwang,et al.  Defect-free synthesis of Stephenson-III motion generators , 2008 .

[24]  K. C. Gupta,et al.  Optimal Synthesis of Function Generators Without the Branch Defect , 1984 .

[25]  Hiroaki Funabashi,et al.  Kinematic Analysis of Stephenson Six-Link Mechanisms : 1st Report, Discrimination of Composition Loops , 1984 .

[26]  J. Michael McCarthy,et al.  Computational Design of Stephenson II Six-Bar Function Generators for 11 Accuracy Points , 2016 .

[27]  Kenneth J. Waldron,et al.  Elimination of the Branch Problem in Graphical Burmester Mechanism Synthesis for Four Finitely Separated Positions , 1976 .

[28]  Andrew Lewis,et al.  The Whale Optimization Algorithm , 2016, Adv. Eng. Softw..

[29]  Jorge Angeles,et al.  The Global Least-Square Optimization of Function-Generating Linkages , 1987 .

[30]  Thomas R. Chase,et al.  Order rectification for complex number based burmester curves , 1988 .

[31]  Amit Kumar Singh,et al.  Defect-free optimal synthesis of crank-rocker linkage using nature-inspired optimization algorithms , 2017 .

[32]  Thomas R. Chase,et al.  Circuit rectification for four precision position synthesis of Stephenson six-bar linkages , 1992 .

[33]  Kenneth J. Waldron,et al.  Solution Rectification in Three Position Motion Generation Synthesis , 1994 .

[34]  T. Chase,et al.  Circuits and Branches of Single-Degree-of-Freedom Planar Linkages , 1990 .

[35]  Thomas R. Chase,et al.  Circuit Rectification for Four Precision Position Synthesis of Four-Bar and Watt Six-Bar Linkages , 1992 .

[36]  Kenneth J. Waldron,et al.  Kinematics, dynamics, and design of machinery , 1998 .

[37]  J. Michael McCarthy,et al.  Kinematic synthesis of Stephenson III six-bar function generators , 2016 .

[38]  Sanjib Kumar Acharyya,et al.  Performance of EAs for four-bar linkage synthesis , 2009 .