The parameterization of all plants stabilized by a proportional-derivative controller

In this paper, we examine the parameterization of all plants stabilized by a proportional-derivative (PD) controller. A PD controller is a kind of Proportional-Integral-Derivative (PID) controllers. The PID controller structure is the most widely used one in industrial applications. Recently, if stabilizing PID controllers for the plant exist, the parameterization of all stabilizing PID controllers has been considered. However, no paper examines the parameterization of all plants stabilized by a PID controller. In this paper, we clarify the parameterization of all plants stabilized by a PD controller. In addition, we present the parameterization of all stabilizing PD controllers for the plant stabilized by a PD controller.

[1]  Graham C. Goodwin,et al.  A parameterization for the class of all stabilizing controllers for linear minimum phase plants , 1994, IEEE Trans. Autom. Control..

[2]  William S. Levine,et al.  The Control Handbook , 2005 .

[3]  Yoshihiko Nakamura,et al.  Gravity Compensation on Humanoid Robot Control with Robust Joint Servo and Non-integrated Rate-gyroscope , 2006, 2006 6th IEEE-RAS International Conference on Humanoid Robots.

[4]  Toshiyuki Kitamori,et al.  A Method of Control System Design Based upon Partial Knowledge about Controlled Processes , 1979 .

[5]  C. Knospe,et al.  PID control , 2006, IEEE Control Systems.

[6]  Jiann-Shiou Yang.  Parameter plane control design for a two-tank chemical reactor system , 1994 .

[7]  C. Desoer,et al.  Feedback system design: The fractional representation approach to analysis and synthesis , 1979, 1979 18th IEEE Conference on Decision and Control including the Symposium on Adaptive Processes.

[8]  Rafael Kelly,et al.  PD control with feedforward compensation for robot manipulators: analysis and experimentation , 2001, Robotica.

[9]  J. G. Ziegler,et al.  Optimum Settings for Automatic Controllers , 1942, Journal of Fluids Engineering.

[10]  Dante C. Youla,et al.  Modern Wiener-Hopf Design of Optimal Controllers. Part I , 1976 .

[11]  P. Tomei.  A simple PD controller for robots with elastic joints , 1991 .

[12]  Dante C. Youla,et al.  Modern Wiener--Hopf design of optimal controllers Part I: The single-input-output case , 1976 .

[13]  N. Munro,et al.  PID controllers: recent tuning methods and design to specification , 2002 .

[14]  Karl Johan Åström,et al.  PID Controllers: Theory, Design, and Tuning , 1995 .

[15]  Shankar P. Bhattacharyya,et al.  A linear programming characterization of all stabilizing PID controllers , 1997, Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).

[16]  John A. Miller,et al.  TUNING CONTROLLERS WITH ERROR-INTEGRAL CRITERIA , 1967 .

[17]  Koichi Suyama.  A Practical Design Method for PID Control Systems , 1993 .

[18]  Takaaki Hagiwara,et al.  The Parameterization of All Plants Stabilized by Proportional Controller Formultiple-Input/Multiple-Output Plant , 2011 .

[19]  Shankar P. Bhattacharyya,et al.  Structure and synthesis of PID controllers , 2000 .

[20]  Patrizio Tomei,et al.  Adaptive PD controller for robot manipulators , 1991, IEEE Trans. Robotics Autom..

[21]  Mathukumalli Vidyasagar,et al.  Control System Synthesis: A Factorization Approach, Part I , 2011, Control System Synthesis Part I.

[22]  K. L. Chien,et al.  On the Automatic Control of Generalized Passive Systems , 1952, Journal of Fluids Engineering.