Quasi optimal sagittal gait of a biped robot with a new structure of knee joint

The design of humanoid robots has been a tricky challenge for several years. Due to the kinematic complexity of human joints, their movements are notoriously difficult to be reproduced by a mechanism. The human knees allow movements including rolling and sliding, and therefore the design of new bio-inspired knees is of utmost importance for the reproduction of anthropomorphic walking in the sagittal plane. In this article, the kinematic characteristics of knees were analyzed and a mechanical solution for reproducing them is proposed. The geometrical, kinematic and dynamic models are built together with an impact model for a biped robot with the new knee kinematic. The walking gait is studied as a problem of parametric optimization under constraints. The trajectories of walking are approximated by mathematical functions for a gait composed of single support phases with impacts. Energy criteria allow comparing the robot provided with the new rolling knee mechanism and a robot equipped with revolute knee joints. The results of the optimizations show that the rolling knee brings a decrease of the sthenic criterion. The comparisons of torques are also observed to show the difference of energy distribution between the actuators. For the same actuator selection, these results prove that the robot with rolling knees can walk longer than the robot with revolute joint knees.

[1]  Guy Bessonnet,et al.  Impactless sagittal gait of a biped robot during the single support phase , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).

[2]  Gabriel Abba,et al.  Modeling of Rolling Knee Biped Robot , 2013 .

[3]  M. Omizo,et al.  Modeling , 1983, Encyclopedic Dictionary of Archaeology.

[4]  Christine Chevallereau,et al.  Bipedal Robots : Modeling, Design and Walking Synthesis , 2009 .

[5]  Yannick Aoustin,et al.  Comparison of different gaits with rotation of the feet for a planar biped , 2009, Robotics Auton. Syst..

[6]  Oussama Khatib,et al.  Springer Handbook of Robotics , 2007, Springer Handbooks.

[7]  Martin Buss,et al.  Effects of compliant ankles on bipedal locomotion , 2009, 2009 IEEE International Conference on Robotics and Automation.

[8]  Kazuhito Yokoi,et al.  Development of a software for motion optimization of robots - Application to the kick motion of the HRP-2 robot , 2006, 2006 IEEE International Conference on Robotics and Biomimetics.

[9]  Stephen J. Wright,et al.  Numerical Optimization , 2018, Fundamental Statistical Inference.

[10]  Yannick Aoustin,et al.  Cross four-bar linkage for the knees of a planar bipedal robot , 2010, 2010 10th IEEE-RAS International Conference on Humanoid Robots.

[11]  Martin Buss,et al.  Compliance in gait synthesis: Effects on energy and gait , 2008, Humanoids 2008 - 8th IEEE-RAS International Conference on Humanoid Robots.

[12]  Manoj Srinivasan,et al.  Fifteen observations on the structure of energy-minimizing gaits in many simple biped models , 2011, Journal of The Royal Society Interface.

[13]  Timothy Bretl,et al.  Asymptotically stable gait primitives for planning dynamic bipedal locomotion in three dimensions , 2010, 2010 IEEE International Conference on Robotics and Automation.

[14]  K. I. M. McKinnon,et al.  Convergence of the Nelder-Mead Simplex Method to a Nonstationary Point , 1998, SIAM J. Optim..

[15]  Friedrich Pfeiffer,et al.  Multibody Dynamics with Unilateral Contacts , 1996 .

[16]  Ting-Ying Wu,et al.  Optimal design and implementation of an energy-efficient, semi-active biped , 2008, 2008 IEEE International Conference on Robotics and Automation.

[17]  Sylvain Miossec.  Contribution à l'étude de la marche d'un bipède , 2004 .

[18]  Mark W. Spong,et al.  Robot dynamics and control , 1989 .

[19]  William James Stronge,et al.  Planar impact of rough compliant bodies , 1994 .

[20]  Jong Hyeon Park,et al.  Generation of optimal trajectory for biped robots with knees stretched , 2009, 2008 IEEE International Conference on Robotics and Biomimetics.

[21]  Guy Bessonnet,et al.  Sagittal gait of a biped robot during the single support phase. Part 2: optimal motion , 2001, Robotica.

[22]  Jeffrey C. Lagarias,et al.  Convergence Properties of the Nelder-Mead Simplex Method in Low Dimensions , 1998, SIAM J. Optim..

[23]  Raymond M. Brach.  Classical planar impact theory and the tip impact of a slender rod , 1993 .

[24]  Stefano Stramigioli,et al.  An energy efficient knee locking mechanism for a dynamically walking robot , 2011, 2011 IEEE International Conference on Robotics and Automation.

[25]  Gabriel Abba,et al.  Optimized Design for the Knee Structure of a Humanoid Robot , 2012 .

[26]  D K Smith,et al.  Numerical Optimization , 2001, J. Oper. Res. Soc..

[27]  Guy Bessonnet,et al.  Sagittal gait of a biped robot during the single support phase. Part 1: passive motion , 2001, Robotica.

[28]  Umberto Scarfogliero,et al.  New joint design to create a more natural and efficient biped , 2009 .

[29]  Wisama Khalil,et al.  Modeling, Identification and Control of Robots , 2003 .

[30]  James E. Bobrow,et al.  Payload maximization for open chained manipulators: finding weightlifting motions for a Puma 762 robot , 2001, IEEE Trans. Robotics Autom..

[31]  Bernard Brogliato,et al.  Modeling, stability and control of biped robots - a general framework , 2004, Autom..

[32]  Juergen Rummel,et al.  Stable and robust walking with compliant legs , 2010, 2010 IEEE International Conference on Robotics and Automation.