Power–Velocity Process Design Charts for Powder Bed Additive Manufacturing

[1]  Erva Ulu,et al.  Enhancing the Structural Performance of Additively Manufactured Objects , 2018, ArXiv.

[2]  Z. Francis.  The Effects of Laser and Electron Beam Spot Size in Additive Manufacturing Processes , 2017 .

[3]  Jack Beuth,et al.  Prediction of lack-of-fusion porosity for powder bed fusion , 2017 .

[4]  Jack Beuth,et al.  Synchrotron-Based X-ray Microtomography Characterization of the Effect of Processing Variables on Porosity Formation in Laser Power-Bed Additive Manufacturing of Ti-6Al-4V , 2017 .

[5]  Jiping Lu,et al.  Performance of High Layer Thickness in Selective Laser Melting of Ti6Al4V , 2016, Materials.

[6]  A. Beese,et al.  Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing , 2016 .

[7]  Karen A. Thole,et al.  Build Direction Effects on Microchannel Tolerance and Surface Roughness , 2015 .

[8]  N Peterson,et al.  Direct measurements of temperature-dependent laser absorptivity of metal powders. , 2015, Applied optics.

[9]  Jean-Pierre Kruth,et al.  Optimization of Scan Strategies in Selective Laser Melting of Aluminum Parts With Downfacing Areas , 2014 .

[10]  M. Lima,et al.  Microstructure and mechanical behavior of laser additive manufactured AISI 316 stainless steel stringers , 2014 .

[11]  Guido A.O. Adam,et al.  Design for Additive Manufacturing—Element transitions and aggregated structures , 2014 .

[12]  John J. Lewandowski,et al.  Melt Pool Characterization for Selective Laser Melting of Ti-6Al-4V Pre-Alloyed Powder , 2014 .

[13]  M. Rombouts,et al.  Cracking behavior and mechanical properties of austenitic stainless steel parts produced by laser metal deposition , 2013 .

[14]  Ninggang Shen,et al.  THERMAL MODELING OF ELECTRON BEAM ADDITIVE MANUFACTURING PROCESS - POWDER SINTERING EFFECTS , 2012 .

[15]  L. Murr,et al.  Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies , 2012 .

[16]  Gideon Levy,et al.  Designing material properties locally with additive manufacturing technology SLM , 2012 .

[17]  Gideon Levy,et al.  Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts , 2011 .

[18]  Jean-Pierre Kruth,et al.  Microstructural investigation of Selective Laser Melting 316L stainless steel parts exposed to laser re-melting , 2011 .

[19]  Li Wang,et al.  Densification behavior of gas and water atomized 316L stainless steel powder during selective laser melting , 2010 .

[20]  Gideon Levy,et al.  Influence of the particle size distribution on surface quality and mechanical properties in additive manufactured stainless steel parts , 2010 .

[21]  D. Mynors,et al.  A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing , 2009 .

[22]  Todd Palmer,et al.  Heat transfer and fluid flow during keyhole mode laser welding of tantalum, Ti–6Al–4V, 304L stainless steel and vanadium , 2007 .

[23]  J. Kruth,et al.  Residual stresses in selective laser sintering and selective laser melting , 2006 .

[24]  Jasbir S. Arora,et al.  Survey of multi-objective optimization methods for engineering , 2004 .

[25]  G. S. Murty,et al.  Hall–Petch behaviour of 316L austenitic stainless steel at room temperature , 2002 .

[26]  David J. Whitehouse,et al.  Surfaces and their Measurement , 2002 .

[27]  Kenneth Cooper,et al.  Laser Engineered Net Shaping , 2001 .

[28]  A. Kar,et al.  Prediction of microstructures in laser welding of stainless steel AISI 304 , 1999 .

[29]  Michael Bass,et al.  Laser Materials Processing , 2018 .