Broadband and High Sensitive Time-of-Flight Diffraction Ultrasonic Transducers Based on PMNT/Epoxy 1–3 Piezoelectric Composite

5–6 MHz PMNT/epoxy 1–3 composites were prepared by a modified dice-and-fill method. They exhibit excellent properties for ultrasonic transducer applications, such as ultrahigh thickness electromechanical coupling coefficient kt (85.7%), large piezoelectric coefficient d33 (1209 pC/N), and relatively low acoustic impedance Z (1.82 × 107 kg/(m2·s)). Besides, two types of Time-of-Flight Diffraction (TOFD) ultrasonic transducers have been designed, fabricated, and characterized, which have different matching layer schemes with the acoustic impedance of 4.8 and 5.7 × 106 kg/(m2·s), respectively. In the detection on a backwall of 12.7 mm polystyrene, the former exhibits higher detectivity, the relative pulse-echo sensitivity and −6 dB relative bandwidth are −21.93 dB and 102.7%, respectively, while the later exhibits broader bandwidth, the relative pulse-echo sensitivity and −6 dB relative bandwidth are −24.08 dB and 117.3%, respectively. These TOFD ultrasonic transducers based on PMNT/epoxy 1–3 composite exhibit considerably improved performance over the commercial PZT/epoxy 1–3 composite TOFD ultrasonic transducer.

[1]  A. A. Bokov,et al.  Ferroelectric properties of monoclinic Pb ( Mg 1 / 3 Nb 2 / 3 ) O 3 − PbTiO 3 crystals , 2002 .

[2]  Di Lin,et al.  An effective growth method to improve the homogeneity of relaxor ferroelectric single crystal Pb(In1/2Nb1/2)O3‐ Pb(Mg1/3Nb2/3)O3‐PbTiO3 , 2014 .

[3]  Anthony Gachagan,et al.  Comparison of the performance of pmn-pt single-crystal and ceramic composite arrays for NDE applications , 2006 .

[4]  W. W. Han,et al.  The Design of Efficient Broad-Band Piezoelectric Transducers , 1978 .

[5]  D. Hsu,et al.  Fabrication and comparison of PMN-PT single crystal, PZT and PZT-based 1-3 composite ultrasonic transducers for NDE applications. , 2010, Ultrasonics.

[6]  R. Krimholtz,et al.  New equivalent circuits for elementary piezoelectric transducers , 1970 .

[7]  Xiangyong Zhao,et al.  Fabrication of PIMNT/Epoxy 1-3 composites and ultrasonic transducer for nondestructive evaluation , 2011, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[8]  Haiqing Xu,et al.  Compositional Homogeneity and Electrical Properties of Lead Magnesium Niobate Titanate Single Crystals Grown by a Modified Bridgman Technique , 2000 .

[9]  Weiqi Wang,et al.  Cylindrically shaped ultrasonic linear array fabricated using PIMNT/epoxy 1-3 piezoelectric composite , 2013 .

[10]  Di Lin,et al.  Elastic, dielectric, and piezoelectric characterization of 0.70Pb(Mg1/3Nb2/3)O3–0.30PbTiO3 single crystals , 2005 .

[11]  T. Shrout,et al.  Characteristics of relaxor-based piezoelectric single crystals for ultrasonic transducers , 1997, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[12]  Wei Wang,et al.  Fabrication of angle beam two-element ultrasonic transducers with PMN–PT single crystal and PMN–PT/epoxy 1–3 composite for NDE applications , 2011 .

[13]  K. Lam,et al.  Broad-band and high-temperature ultrasonic transducer fabricated using a Pb(In(1∕2)Nb(1∕2))-Pb(Mg(1∕3)Nb(2∕3))-PbTiO3 single crystal∕epoxy 1-3 composite. , 2011, The Review of scientific instruments.

[14]  Wei Wang,et al.  The compositional segregation, phase structure and properties of Pb(In1/2Nb1/2)O3–Pb(Mg1/3Nb2/3)O3–PbTiO3 single crystal , 2011 .

[15]  Weiqi Wang,et al.  Ternary piezoelectric single-crystal PIMNT based 2-2 composite for ultrasonic transducer applications , 2013 .

[16]  Yan Chen,et al.  High Performance Relaxor-Based Ferroelectric Single Crystals for Ultrasonic Transducer Applications , 2014, Sensors.

[17]  戴吉岩 Broad-band and high-temperature ultrasonic transducer fabricated using a Pb(In1/2Nb1/2)-Pb(Mg1/3Nb2/3)-PbTiO3 single crystal/epoxy 1–3 composite , 2011 .