Feasibility of a Biomechanically-Assistive Garment to Reduce Low Back Loading During Leaning and Lifting

Goal: The purpose of this study was: 1) to design and fabricate a biomechanically-assistive garment which was sufficiently lightweight and low-profile to be worn underneath, or as, clothing, and then 2) to perform human subject testing to assess the ability of the garment to offload the low back muscles during leaning and lifting. Methods: We designed a prototype garment which acts in parallel with the low back extensor muscles to reduce forces borne by the lumbar musculature. We then tested eight healthy subjects while they performed common leaning and lifting tasks with and without the garment. We recorded muscle activity, body kinematics, and assistive forces. Results: The biomechanically-assistive garment offloaded the low back muscles, reducing erector spinae muscle activity by an average of 23–43% during leaning tasks, and 14–16% during lifting tasks. Conclusion: Experimental findings in this study support the feasibility of using biomechanically-assistive garments to reduce low back muscle loading, which may help reduce injury risks or fatigue due to high or repetitive forces. Significance: Biomechanically-assistive garments may have broad societal appeal as a lightweight, unobtrusive, and cost-effective means to mitigate low back loading in daily life.

[1]  R. Norman,et al.  1986 Volvo Award in Biomechanics: Partitioning of the L4 - L5 Dynamic Moment into Disc, Ligamentous, and Muscular Components During Lifting , 1986, Spine.

[2]  P. Brinckmann,et al.  Prediction of the Compressive Strength of Human Lumbar Vertebrae , 1989, Spine.

[3]  G Németh,et al.  Moment Arm Lengths of Trunk Muscles to the Lumbosacral Joint Obtained In Vivo with Computed Tomography , 1986, Spine.

[4]  T. Vos,et al.  Measuring the global burden of low back pain. , 2010, Best practice & research. Clinical rheumatology.

[5]  Conor Walsh,et al.  Physical interface dynamics alter how robotic exosuits augment human movement: implications for optimizing wearable assistive devices , 2017, Journal of NeuroEngineering and Rehabilitation.

[6]  W S Marras,et al.  A literature review of low back disorder surveillance measures and risk factors. , 1997, Clinical biomechanics.

[7]  D B Chaffin,et al.  A longitudinal study of low-back pain as associated with occupational weight lifting factors. , 1973, American Industrial Hygiene Association journal.

[8]  Homayoon Kazerooni,et al.  Lower Extremity Exoskeleton Reduces Back Forces in Lifting , 2009 .

[9]  J. Katz,et al.  Lumbar disc disorders and low-back pain: socioeconomic factors and consequences. , 2006, The Journal of bone and joint surgery. American volume.

[10]  Y. Kakazu,et al.  Development of wearable exoskeleton power assist system for lower back support , 2003, Proceedings 2003 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2003) (Cat. No.03CH37453).

[11]  Conor J. Walsh,et al.  A biologically inspired soft exosuit for walking assistance , 2015, Int. J. Robotics Res..

[12]  J. Freburger,et al.  The rising prevalence of chronic low back pain. , 2009, Archives of internal medicine.

[13]  King H. Yang,et al.  Mechanism of Disc Rupture: A Preliminary Report , 1991, Spine.

[14]  Y. Sankai,et al.  HAL equipped with passive mechanism , 2012, 2012 IEEE/SICE International Symposium on System Integration (SII).

[15]  D L Bader,et al.  Fatigue damage of human tendons. , 2002, Journal of biomechanics.

[16]  J R Potvin,et al.  Trunk Muscle and Lumbar Ligament Contributions to Dynamic Lifts with Varying Degrees of Trunk Flexion , 1991, Spine.

[17]  I. Kingma,et al.  Cumulative Low Back Load at Work as a Risk Factor of Low Back Pain: A Prospective Cohort Study , 2012, Journal of Occupational Rehabilitation.

[18]  P. de Leva.  Adjustments to Zatsiorsky-Seluyanov's segment inertia parameters. , 1996, Journal of biomechanics.

[19]  W S Marras,et al.  A Three-Dimensional Motion Model of Loads on the Lumbar Spine: I. Model Structure , 1991, Human factors.

[20]  Babak Bazrgari,et al.  Analysis of squat and stoop dynamic liftings: muscle forces and internal spinal loads , 2007, European Spine Journal.

[21]  Darwin G. Caldwell,et al.  A wearable device for reducing spinal loads during lifting tasks: Biomechanics and design concepts , 2015, 2015 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[22]  Keijiro Yamamoto,et al.  Development of Power Assisting Suit for Assisting Nurse Labor , 2002 .

[23]  R. Deyo,et al.  Expenditures and health status among adults with back and neck problems. , 2008, JAMA.

[24]  Joan M Stevenson,et al.  Mathematical and empirical proof of principle for an on-body personal lift augmentation device (PLAD). , 2007, Journal of biomechanics.

[25]  W. Marras,et al.  An EMG-assisted model of trunk loading during free-dynamic lifting. , 1995, Journal of biomechanics.

[26]  M. Adams,et al.  The Resistance to Flexion of the Lumbar Intervertebral Joint , 1980, Spine.

[27]  Yong Yu,et al.  Wearable stooping-assist device in reducing risk of low back disorders during stooped work , 2013, 2013 IEEE International Conference on Mechatronics and Automation.

[28]  N. Sakamoto,et al.  Smart Suit: Soft power suit with semi-active assist mechanism - prototype for supporting waist and knee joint - , 2008, 2008 International Conference on Control, Automation and Systems.

[29]  Serge H. Roy,et al.  Lumbar Muscle Fatigue and Chronic Lower Back Pain , 1989, Spine.

[30]  A. Nachemson.  Disc Pressure Measurements , 1981, Spine.

[31]  Michael J Agnew,et al.  An on-body personal lift augmentation device (PLAD) reduces EMG amplitude of erector spinae during lifting tasks. , 2006, Clinical biomechanics.

[32]  A. Schultz,et al.  Loads on the lumbar spine. Validation of a biomechanical analysis by measurements of intradiscal pressures and myoelectric signals. , 1982, The Journal of bone and joint surgery. American volume.

[33]  Haruo Tsuji,et al.  Risk Indicators of Low Back Pain Among Workers in Japan: Association of Familial and Physical Factors With Low Back Pain , 1997, Spine.

[34]  I W Nelson,et al.  Mechanical initiation of intervertebral disc degeneration. , 2000, Spine.

[35]  H. Heneweer,et al.  Physical activity and low back pain: a systematic review of recent literature , 2011, European Spine Journal.

[36]  D. Hoy,et al.  The global epidemiology of low back pain , 2011 .

[37]  M. de Looze,et al.  The effects of a passive exoskeleton on muscle activity, discomfort and endurance time in forward bending work. , 2016, Applied ergonomics.

[38]  B. Bernard,et al.  Musculoskeletal disorders and workplace factors: a critical review of epidemiologic evidence for work-related musculoskeletal disorders of the neck, upper extremity, and low back , 1997 .

[39]  P. Dolan,et al.  Repetitive lifting tasks fatigue the back muscles and increase the bending moment acting on the lumbar spine. , 1998, Journal of biomechanics.

[40]  T. Keller,et al.  Mechanical behavior of the human lumbar spine. II. Fatigue strength during dynamic compressive loading , 1987, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[41]  W. Marras,et al.  The Influence of Trunk Muscle Coactivity on Dynamic Spinal Loads , 1995, Spine.

[42]  G. Andersson.  Epidemiological features of chronic low-back pain , 1999, The Lancet.

[43]  Fadi A Fathallah,et al.  Effect of a personal weight transfer device on muscle activities and joint flexions in the stooped posture. , 2013, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[44]  N. Bogduk.  Clinical Anatomy of the Lumbar Spine and Sacrum , 1997 .

[45]  Frank C. Sup,et al.  Design and Preliminary Evaluation of a Passive Spine Exoskeleton , 2016 .

[46]  Valentina La Scaleia,et al.  Coordination of intrinsic and extrinsic foot muscles during walking , 2015, European Journal of Applied Physiology.

[47]  H. Kazerooni,et al.  Biomechanical design of the Berkeley lower extremity exoskeleton (BLEEX) , 2006, IEEE/ASME Transactions on Mechatronics.

[48]  R. Lipton,et al.  Lost productive time and cost due to common pain conditions in the US workforce. , 2003, JAMA.

[49]  S. Kumar,et al.  Cumulative Load as a Risk Factor for Back Pain , 1990, Spine.