Control system design with online planning for a desired signal and its application to robot manipulators

A simultaneous design method of an online planner of a desired signal and a control system is proposed to consider the interaction between the planner and the control system. The designed planner is sufficiently simple to calculate in real time. The proposed method is applied to posture control of robot manipulators.

[1]  J. Y. S. Luh,et al.  Resolved-acceleration control of mechanical manipulators , 1980 .

[2]  Isao Hara,et al.  Describing moving spherical obstacle in a configuration space , 1991, Proceedings IROS '91:IEEE/RSJ International Workshop on Intelligent Robots and Systems '91.

[3]  N. McKay,et al.  A dynamic programming approach to trajectory planning of robotic manipulators , 1986 .

[4]  Max Q.-H. Meng,et al.  Impedance control with adaptation for robotic manipulations , 1991, IEEE Trans. Robotics Autom..

[5]  Weiping Li,et al.  Applied Nonlinear Control , 1991 .

[6]  Kang G. Shin,et al.  Minimum-time control of robotic manipulators with geometric path constraints , 1985 .

[7]  V. Lumelsky,et al.  Dynamic path planning for a mobile automaton with limited information on the environment , 1986 .

[8]  C. Lin,et al.  Formulation and optimization of cubic polynomial joint trajectories for industrial robots , 1983 .

[9]  Wyatt S. Newman,et al.  Rapid computation of configuration space obstacles , 1990, Proceedings., IEEE International Conference on Robotics and Automation.

[10]  Oussama Khatib,et al.  Real-Time Obstacle Avoidance for Manipulators and Mobile Robots , 1986 .

[11]  Takeshi Tsuchiya,et al.  Robot manipulator path control based on variable speed trajectory planning , 1991, Adv. Robotics.

[12]  Tomás Lozano-Pérez,et al.  Parallel robot motion planning , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[13]  C.-H. Wang,et al.  Constrained minimum-time path planning for robot manipulators via virtual knots of the cubic B-spline functions , 1990 .

[14]  Takeshi Tsuchiya,et al.  Decoupled preview control system and its application to induction motor drive , 1995, IEEE Trans. Ind. Electron..

[15]  Takeshi Tsuchiya,et al.  On-Line Planning for Desired Signal , 1994 .

[16]  Kazuhiro Kosuge,et al.  Coordinated motion control of robot arm based on virtual internal model , 1989, Proceedings, 1989 International Conference on Robotics and Automation.