Kinematic synthesis of Stephenson III six-bar function generators

© 2015 Elsevier Ltd. All rights reserved. This paper presents a direct solution of the kinematic synthesis equations for Stephenson III six-bar function generators to achieve as many as 11 accuracy points. The approach is similar to that used to design Stephenson II function generators, except additional algebraic manipulations reduce the system to a multihomogeneous degree of 55,050,240. A numerically general multihomogeneous homotopy was used to obtain 834,441 nonsingular solutions, which were then used to construct an efficient parameter homotopy for specific tasks consisting of 11 accuracy points. The thousands of linkage solutions found by this parameter homotopy are sorted and analyzed to verify nonbranching movement through the specified task positions. An example is presented of a function generator that creates a specified torque-angle profile for a dynamic wrist splint that cancels the effects of spasticity in the wrists of stroke survivors.

[1]  K. M. Ragsdell,et al.  A Survey of Optimization Methods Applied to the Design of Mechanisms , 1976 .

[2]  J. Michael McCarthy,et al.  Computational Design of Stephenson II Six-Bar Function Generators for 11 Accuracy Points , 2016 .

[3]  Ramon Sancibrian.  Improved GRG method for the optimal synthesis of linkages in function generation problems , 2011 .

[4]  Arthur G. Erdman,et al.  Mechanism Design : Analysis and Synthesis , 1984 .

[5]  Radovan R. Bulatović,et al.  Cuckoo Search algorithm: A metaheuristic approach to solving the problem of optimum synthesis of a six-bar double dwell linkage , 2013 .

[6]  C. W. McLarnan.  Synthesis of Six-Link Plane Mechanisms by Numerical Analysis , 1963 .

[7]  P. Shiakolas,et al.  On the Optimum Synthesis of Six-Bar Linkages Using Differential Evolution and the Geometric Centroid of Precision Positions Technique , 2003 .

[8]  Shrinivas S. Balli,et al.  Defects in link mechanisms and solution rectification , 2002 .

[9]  Anoop K. Dhingra,et al.  Synthesis of six-link, slider-crank and four-link mechanisms for function, path and motion generation using homotopy with m-homogenization , 1994 .

[10]  Lung-Wen Tsai,et al.  Mechanism Design: Enumeration of Kinematic Structures According to Function , 2001 .

[11]  P. A. Simionescu,et al.  Four- and six-bar function cognates and overconstrained mechanisms , 2001 .

[12]  Charles W. Wampler,et al.  ISOTROPIC COORDINATES , CIRCULARITY , AND BEZOUT NUMBERS : PLANAR KINEMATICS FROM A NEW PERSPECTIVE , 1996 .

[13]  Ferdinand Freudenstein,et al.  Kinematic Synthesis of Linkages , 1965 .

[14]  S. Roberts.  On Three‐bar Motion in Plane Space , 1875 .

[15]  Wen-Yeuan Chung.  Double configurations of five-link Assur kinematic chain and stationary configurations of Stephenson six-bar , 2007 .

[16]  T. Chase,et al.  Circuits and Branches of Single-Degree-of-Freedom Planar Linkages , 1990 .

[17]  Mark Mathew Plecnik.  The Kinematic Design of Six-bar Linkages Using Polynomial Homotopy Continuation , 2015 .

[18]  Derek Michael Bissell.  WRIST (Wrist Resonator for Independent Stroke Training) , 2014 .

[19]  Jonathan D. Hauenstein,et al.  Numerically Solving Polynomial Systems with Bertini , 2013, Software, environments, tools.

[20]  Wen Miin Hwang,et al.  Defect-Free Synthesis of Stephenson-II Function Generators , 2010 .

[21]  Ricardo Corey Blackett.  Optimal Synthesis of Planar Five-link Mechanisms for the Production of Nonlinear Mechanical Advantage , 2001 .

[22]  Ea Evert Dijksman.  Motion Geometry of Mechanisms , 1976 .

[23]  M. Mirbagheri,et al.  Neuromuscular properties of different spastic human joints vary systematically , 2010, 2010 Annual International Conference of the IEEE Engineering in Medicine and Biology.

[24]  J. Michael McCarthy,et al.  Numerical Synthesis of Six-Bar Linkages for Mechanical Computation , 2014 .