Run by run advanced process control of metal sputter deposition

Metal sputter deposition processes for semiconductor manufacturing are characterized by a decrease in deposition rate from run to run as the sputter target degrades. The goal is to maintain a desired deposition thickness from wafer to wafer and lot to lot. Run by run (RbR) model-based process control (MBPC) has been applied to metal sputter deposition processes at Texas Instruments. RbR MBPC, based on the exponentially weighted moving-average filter, provides the ability to track and compensate for process drifts without a priori assumptions on their magnitude or consistency (from sputter target to sputter target or collimator to collimator). The application of RbR MBPC resulted in an improved C/sub pk/ of 44% for aluminum sputter deposition, while reducing the number of lot-based monitor wafers by a factor of three. The application of RbR MBPC to the titanium sputter deposition process eliminated look-ahead test runs and reduced the number of monitor wafers by a factor of three. At the same time, C/sub pk/ was improved by 10% with the application of RbR MBPC.

[1]  Armann Ingolfsson,et al.  Run by run process control: combining SPC and feedback control , 1995 .

[2]  S. Saxena,et al.  A monitor wafer based controller for semiconductor processes , 1994 .

[3]  James Moyne,et al.  Control of semiconductor manufacturing equipment: real-time feedback control of a reactive ion etcher , 1995 .

[4]  James Moyne,et al.  A multilevel approach to the control of a chemical-mechanical planarization process , 1996 .

[5]  James Moyne,et al.  Compensating for CMP Pad Wear Using Run by Run Feedback Control , 1996 .

[6]  Duane S. Boning,et al.  A self-tuning EWMA controller utilizing artificial neural network function approximation techniques , 1996, Nineteenth IEEE/CPMT International Electronics Manufacturing Technology Symposium.

[7]  Duane S. Boning,et al.  Artificial neural network exponentially weighted moving average controller for semiconductor processes , 1997 .

[8]  George E. P. Box,et al.  Statistical process monitoring and feedback adjustment: a discussion , 1992 .

[9]  Costas J. Spanos,et al.  A control system for photolithographic sequences , 1996 .

[10]  Thomas F. Edgar,et al.  MODELING AND CONTROL OF MICROELECTRONICS MATERIALS PROCESSING , 1992 .

[11]  S. W. Butler,et al.  Supervisory run-to-run control of polysilicon gate etch using in situ ellipsometry , 1994 .

[12]  Amy Unruh,et al.  Sensor integration into plasma etch reactors of a developmental pilot line , 1994 .

[13]  B. A. Rashap,et al.  Sensor systems for real-time feedback control of reactive ion etching , 1996 .

[14]  Thomas F. Edgar,et al.  Modeling and control of microelectronics materials processing , 1995 .

[15]  Jerry A. Stefani,et al.  Advanced process control of a CVD tungsten reactor , 1996 .

[16]  Duane S. Boning,et al.  Practical issues in run by run process control , 1995, Proceedings of SEMI Advanced Semiconductor Manufacturing Conference and Workshop.

[17]  P. K. Mozumder,et al.  Statistical feedback control of a plasma etch process , 1994 .