Full automatic path planning of cooperating robots in industrial applications

Parts made of carbon fiber reinforced plastics (CFRP) for airplane components can be so huge that a single industrial robot is no longer able to handle them, and cooperating robots are required. Manual programming of cooperating robots is difficult, but with large numbers of different sized and shaped cut-pieces, it is almost impossible. This paper presents an automated production system consisting of a camera for the precise detection of the position of each cut-piece and a collision-free path planner which can dynamically react to different positions for the transfer motions. The path is planned for multiple robots adhering to motion constrains, such as the requirement that the textile cut-piece must form a catenary which can change during transport. Additionally a technique based on machine learning has been implemented which correctly resolves redundancy for a linear axis during planning. Finally, all components are tested on a real robot system in industrial scale.

[1]  Yahui Gan,et al.  Cooperative Path Planning and Constraints Analysis for Master-Slave Industrial Robots , 2012 .

[2]  Alfons Schuster,et al.  Automated preforming of curved thermoplastic organic sheets , 2015 .

[3]  Lars Larsen,et al.  Intelligent Path Panning Towards Collision-free Cooperating Industrial Robots , 2014 .

[4]  Spyros G. Tzafestas,et al.  Path Planning and Control of a Cooperative Three-Robot System Manipulating Large Objects , 1998, J. Intell. Robotic Syst..

[5]  Drew P. Davis COLLISION FREE PATH PLANNING OF AN OBJECT USING MULTIPLE ROBOT MANIPULATORS , 2014 .

[6]  M. Mediavilla,et al.  REACTIVE PATH PLANNING FOR ROBOTIC ARMS WITH MANY DEGREES OF FREEDOM IN DYNAMIC ENVIRONMENTS , 2002 .

[7]  Mathias Brandstötter,et al.  An Analytical Solution of the Inverse Kinematics Problem of Industrial Serial Manipulators with an Ortho-parallel Basis and a Spherical Wrist , 2014 .

[8]  John F. Gardner,et al.  Kinematics of redundantly actuated closed chains , 1990, IEEE Trans. Robotics Autom..

[9]  Georg Braun,et al.  Design of a multifunctional cell for aerospace CFRP production , 2016 .

[10]  Mansour Karkoub,et al.  Modelling and control of two robotic manipulators handling a constrained object , 2000 .

[11]  Andreas Angerer,et al.  Robotics API: object-oriented software development for industrial robots , 2013 .

[12]  Andreas Buchheim,et al.  Investigation of an automated dry fiber preforming process for an aircraft fuselage demonstrator using collaborating robots , 2016 .

[13]  Aude Billard,et al.  Dynamical System-Based Motion Planning for Multi-Arm Systems: Reaching for Moving Objects , 2017, IJCAI.

[14]  Lars Larsen,et al.  Collision-free path planning of industrial cooperating robots for aircraft fuselage production , 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA).

[15]  Lydia E. Kavraki,et al.  The Open Motion Planning Library , 2012, IEEE Robotics & Automation Magazine.

[16]  Tullio Tolio,et al.  Validation of an Extended Approach to Multi-robot Cell Design and Motion Planning , 2015 .

[17]  G. G. Stokes "J." , 1890, The New Yale Book of Quotations.

[18]  J. Guckenheimer Dynamic model , 1989, Nature.

[19]  Yahui Gan,et al.  Off-Line Programming Techniques for Multirobot Cooperation System , 2013 .

[20]  Andreas Angerer,et al.  Planning and execution of collision-free multi-robot trajectories in industrial applications , 2016 .

[21]  Andreas Angerer,et al.  Flexible and continuous execution of real-time critical robotic tasks , 2014, Int. J. Mechatronics Autom..

[22]  Juan Cortés Mastral Motion Planning Algorithms for General Closed-Chain Mechanisms , 2003 .

[23]  Marco A. Arteaga,et al.  Dynamic Model, Control and Simulation of Cooperative Robots: A Case Study , 2006 .

[24]  Lotfi Romdhane,et al.  Real-Time Path Planning for Multi-DoF Manipulators in Dynamic Environment , 2006 .

[25]  Shimon Y. Nof,et al.  Handbook of Industrial Robotics , 2013 .