An experimental study of bellows-type fluidic soft bending actuators under external water pressure

Soft actuators which are composed of low-modulus material have broad application prospects in marine exploration tasks such as biological sampling due to their inherent compliance and adaptability. However, the influence of underwater pressure on the soft actuators remains to be studied. In this work, an experimental study of bellows-type fluidic soft bending actuators fabricated with 3D printing technology is implemented. Deep sea test environment is simulated by adjustable external water pressure. The response of the soft actuator to the input pressure under different external pressure (from 1 atm to 15 MPa) is presented and discussed. The results show that the external water pressure can cause the actuator to bend more in both static and dynamic conditions. Moreover, the increase of the bending angle is positively related with the environment pressure. In general, the feasibility of the soft actuators and the fluid power system for underwater applications are verified. This work can provide experimental reference for the design and control of soft manipulators in marine operation.

[1]  David M. Lane,et al.  The AMADEUS dextrous subsea hand: design, modeling, and sensor processing , 1999 .

[2]  Filip Ilievski,et al.  Soft robotics for chemists. , 2011, Angewandte Chemie.

[3]  D. Rus,et al.  Design, fabrication and control of soft robots , 2015, Nature.

[4]  Robert J. Wood,et al.  Soft Robotic Grippers for Biological Sampling on Deep Reefs , 2016, Soft robotics.

[5]  YapHong Kai,et al.  High-Force Soft Printable Pneumatics for Soft Robotic Applications , 2016 .

[6]  Oliver Brock,et al.  A novel type of compliant and underactuated robotic hand for dexterous grasping , 2016, Int. J. Robotics Res..

[7]  Matteo Cianchetti,et al.  Soft robotics: Technologies and systems pushing the boundaries of robot abilities , 2016, Science Robotics.

[8]  Hong Kai Yap,et al.  A fabric-regulated soft robotic glove with user intent detection using EMG and RFID for hand assistive application , 2016, 2016 IEEE International Conference on Robotics and Automation (ICRA).

[9]  Stephen Licht,et al.  Universal jamming grippers for deep-sea manipulation , 2016, OCEANS 2016 MTS/IEEE Monterey.

[10]  Kaitlyn P. Becker,et al.  Shipboard design and fabrication of custom 3D-printed soft robotic manipulators for the investigation of delicate deep-sea organisms , 2018, PloS one.

[11]  G. Alici,et al.  Modeling and Experimental Evaluation of Bending Behavior of Soft Pneumatic Actuators Made of Discrete Actuation Chambers. , 2017, Soft robotics.

[12]  Tao Wang,et al.  Parameter Identification and Model-Based Nonlinear Robust Control of Fluidic Soft Bending Actuators , 2019, IEEE/ASME Transactions on Mechatronics.