Bio-inspired standing balance controller for a full-mobilization exoskeleton

This paper presents a novel method to perform automatic standing balance in a full mobilization exoskeleton. It exploits the locked ankle and the curved foot sole of the exoskeleton TWIICE. The idea is to use the knees to roll the sole and change the position of the contact point with the floor, which allows to stabilize without an actuated ankle.This controller is biologically inspired, originating from a previous experiment with the passive exoskeleton CAPTUR and healthy subjects. Then, a simulation model was built to test the observed balance strategy. Finally, the controller was implemented on the actual actuated exoskeleton, without a wearer for the time being, to experimentally check the basic operation. The next planned step is to test its actual performance with healthy subjects, then paraplegic patients.

[1]  C. E. Clauser,et al.  Weight, volume, and center of mass of segments of the human body , 1969 .

[2]  David A. Winter,et al.  Human balance and posture control during standing and walking , 1995 .

[3]  David A. Winter,et al.  Anticipatory control of center of mass and joint stability during voluntary arm movement from a standing posture: interplay between active and passive control , 2002, Experimental Brain Research.

[4]  S. Collins,et al.  The advantages of a rolling foot in human walking , 2006, Journal of Experimental Biology.

[5]  José Luis Pons Rovira,et al.  An adaptive control strategy for postural stability using a wearable robot , 2015, Robotics Auton. Syst..

[6]  Muhammad Abd-El-Barr,et al.  Long-term Training With a Brain-Machine Interface-Based Gait Protocol Induces Partial Neurological Recovery in Paraplegic Patients. , 2016, Neurosurgery.

[7]  Jesper Smith,et al.  Stepping Forward with Exoskeletons: Team IHMC?s Design and Approach in the 2016 Cybathlon , 2017, IEEE Robotics & Automation Magazine.

[8]  Hannes Bleuler,et al.  TWIICE — A lightweight lower-limb exoskeleton for complete paraplegics , 2017, 2017 International Conference on Rehabilitation Robotics (ICORR).

[9]  Mirko Meboldt,et al.  Development of VariLeg, an exoskeleton with variable stiffness actuation: first results and user evaluation from the CYBATHLON 2016 , 2018, Journal of NeuroEngineering and Rehabilitation.

[10]  Edwin van Asseldonk,et al.  Improving the Standing Balance of Paraplegics through the Use of a Wearable Exoskeleton , 2018, 2018 7th IEEE International Conference on Biomedical Robotics and Biomechatronics (Biorob).

[11]  Etienne Burdet,et al.  Assisting Human Balance in Standing With a Robotic Exoskeleton , 2019, IEEE Robotics and Automation Letters.

[12]  Hannes Bleuler,et al.  Balance Control Strategies during Standing in a Locked-Ankle Passive Exoskeleton , 2019, 2019 IEEE 16th International Conference on Rehabilitation Robotics (ICORR).