PMSG-based wind energy conversion systems: survey on power converters and controls

The permanent magnet synchronous generator (PMSG) is dominantly used in the present wind energy market. Reflecting the latest wind energy market trends and research articles, this study presents a survey on important electrical engineering aspects for PMSG-based megawatt-level wind energy conversion systems (WECSs). A comprehensive analysis on power converter topologies for wind turbines (WTs), grid integration of wind farms, digital control schemes, fault-ride-through compliance methods, and future trends is presented. The updated market share, technology trends, WT products information, in-depth technical analysis, and promising research works highlighted in this study will help the reader to understand the state-of-the-art and emerging technologies for PMSG-based WECS.

[1]  Bin Wu,et al.  Use of Stored Energy in PMSG Rotor Inertia for Low-Voltage Ride-Through in Back-to-Back NPC Converter-Based Wind Power Systems , 2013, IEEE Transactions on Industrial Electronics.

[2]  F. Blaabjerg,et al.  Device loading of modular multilevel converter MMC in wind power application , 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

[3]  Bin Wu,et al.  The Essential Role and the Continuous Evolution of Modulation Techniques for Voltage-Source Inverters in the Past, Present, and Future Power Electronics , 2016, IEEE Transactions on Industrial Electronics.

[4]  Dianguo Xu,et al.  Control of Parallel Multiple Converters for Direct-Drive Permanent-Magnet Wind Power Generation Systems , 2012, IEEE Transactions on Power Electronics.

[5]  Bin Wu,et al.  Predictive Control of a Three-Level Boost Converter and an NPC Inverter for High-Power PMSG-Based Medium Voltage Wind Energy Conversion Systems , 2014, IEEE Transactions on Power Electronics.

[6]  Yongdong Li,et al.  A Transformer-Less High-Power Converter for Large Permanent Magnet Wind Generator Systems , 2012, IEEE Transactions on Sustainable Energy.

[7]  Marco Liserre,et al.  Overview of Multi-MW Wind Turbines and Wind Parks , 2011, IEEE Transactions on Industrial Electronics.

[8]  Kostas Kalaitzakis,et al.  Design of a maximum power tracking system for wind-energy-conversion applications , 2006, IEEE Transactions on Industrial Electronics.

[9]  Frede Blaabjerg,et al.  Future on Power Electronics for Wind Turbine Systems , 2013, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[10]  H. L. Ginn,et al.  Comprehensive review of wind energy maximum power extraction algorithms , 2011, 2011 IEEE Power and Energy Society General Meeting.

[11]  Kais Atallah,et al.  Trends in Wind Turbine Generator Systems , 2013, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[12]  Wei Qiao,et al.  A Review on Position/Speed Sensorless Control for Permanent-Magnet Synchronous Machine-Based Wind Energy Conversion Systems , 2013, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[13]  Bin Wu,et al.  Predictive Control for Low-Voltage Ride-Through Enhancement of Three-Level-Boost and NPC-Converter-Based PMSG Wind Turbine , 2014, IEEE Transactions on Industrial Electronics.

[14]  V.G. Agelidis,et al.  VSC-Based HVDC Power Transmission Systems: An Overview , 2009, IEEE Transactions on Power Electronics.

[15]  Maryam Saeedifard,et al.  Operation, Control, and Applications of the Modular Multilevel Converter: A Review , 2015, IEEE Transactions on Power Electronics.

[16]  Roberto Cárdenas,et al.  Overview of control systems for the operation of DFIGs in wind energy applications , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

[17]  Bin Wu,et al.  Fault Ride-Through Capability of Cascaded Current-Source Converter-Based Offshore Wind Farm , 2013, IEEE Transactions on Sustainable Energy.

[18]  M. Pacas,et al.  Predictive direct torque control for the PM synchronous machine , 2005, IEEE Transactions on Industrial Electronics.

[19]  Bin Wu,et al.  A Novel Control Scheme for Current-Source-Converter-Based PMSG Wind Energy Conversion Systems , 2009, IEEE Transactions on Power Electronics.

[20]  Leon M. Tolbert,et al.  Efficiency Impact of Silicon Carbide Power Electronics for Modern Wind Turbine Full Scale Frequency Converter , 2011, IEEE Transactions on Industrial Electronics.

[21]  Bin Wu,et al.  A New Nested Neutral Point-Clamped (NNPC) Converter for Medium-Voltage (MV) Power Conversion , 2014, IEEE Transactions on Power Electronics.

[22]  Seung-Ho Song,et al.  Implementation and control of grid connected AC-DC-AC power converter for variable speed wind energy conversion system , 2003, Eighteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2003. APEC '03..

[23]  Liuchen Chang,et al.  Reactive Power Control of Permanent-Magnet Synchronous Wind Generator With Matrix Converter , 2013, IEEE Transactions on Power Delivery.

[24]  Bin Wu,et al.  A New Power Conversion System for Megawatt PMSG Wind Turbines Using Four-Level Converters and a Simple Control Scheme Based on Two-Step Model Predictive Strategy—Part I: Modeling and Theoretical Analysis , 2014, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[25]  Takahiro Uchino,et al.  Development of MCs and its Applications in Industry [Industry Forum] , 2011, IEEE Industrial Electronics Magazine.

[26]  Li Ran,et al.  Fault-Tolerant Control for a Modular Generator–Converter Scheme for Direct-Drive Wind Turbines , 2011, IEEE Transactions on Industrial Electronics.

[27]  B. W. Williams,et al.  Different torque ripple reduction methods for wind energy conversion systems using diode rectifier and boost converter , 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

[28]  J. F. Conroy,et al.  Low-voltage ride-through of a full converter wind turbine with permanent magnet generator , 2007 .

[29]  Samir Kouro,et al.  Circuit Topologies, Modeling, Control Schemes, and Applications of Modular Multilevel Converters , 2015, IEEE Transactions on Power Electronics.

[30]  Silverio Bolognani,et al.  Model Predictive Direct Torque Control With Finite Control Set for PMSM Drive Systems, Part 1: Maximum Torque Per Ampere Operation , 2013, IEEE Transactions on Industrial Informatics.

[31]  B. W. Williams,et al.  A review on recent low voltage ride-through solutions for PMSG wind turbine , 2012, International Symposium on Power Electronics Power Electronics, Electrical Drives, Automation and Motion.

[32]  Bin Wu,et al.  Dual-Stage Model Predictive Control With Improved Harmonic Performance for Modular Multilevel Converter , 2016, IEEE Transactions on Industrial Electronics.

[33]  Stefan Lundberg.  Evaluation of Wind Farm Layouts , 2004 .

[34]  M. Liserre,et al.  Toward Reliable Power Electronics: Challenges, Design Tools, and Opportunities , 2013, IEEE Industrial Electronics Magazine.

[35]  John E. Fletcher,et al.  Torque ripple analysis and reduction for wind energy conversion systems using uncontrolled rectifier and boost converter , 2011 .

[36]  Jiabing Hu,et al.  Investigation on Switching Patterns of Direct Power Control Strategies for Grid-Connected DC–AC Converters Based on Power Variation Rates , 2011, IEEE Transactions on Power Electronics.

[37]  Bin Wu,et al.  Unified DC-Link Current Control for Low-Voltage Ride-Through in Current-Source-Converter-Based Wind Energy Conversion Systems , 2011, IEEE Transactions on Power Electronics.

[38]  W.L. Kling,et al.  HVDC Connection of Offshore Wind Farms to the Transmission System , 2007, IEEE Transactions on Energy Conversion.

[39]  Shigeo Morimoto,et al.  Servo drive system and control characteristics of salient pole permanent magnet synchronous motor , 1993 .

[40]  Emil Levi,et al.  Multiphase Electric Machines for Variable-Speed Applications , 2008, IEEE Transactions on Industrial Electronics.

[41]  Peter W. Lehn,et al.  Interconnection of Direct-Drive Wind Turbines Using a Series-Connected DC Grid , 2014, IEEE Transactions on Sustainable Energy.

[42]  B. Gamble,et al.  10 MW Class Superconductor Wind Turbine Generators , 2011, IEEE Transactions on Applied Superconductivity.

[43]  P. Rodriguez,et al.  Power Capability Investigation Based on Electrothermal Models of Press-Pack IGBT Three-Level NPC and ANPC VSCs for Multimegawatt Wind Turbines , 2012, IEEE Transactions on Power Electronics.

[44]  Igor Larrazabal,et al.  Multi-megawatt wind turbine converter configurations suitable for off-shore applications, combining 3-L NPC PEBBs , 2013, 2013 IEEE Energy Conversion Congress and Exposition.

[45]  F. Wittwer,et al.  Medium voltage converter for permanent magnet wind power generators up to 5 MW , 2005, 2005 European Conference on Power Electronics and Applications.

[46]  M. Chinchilla,et al.  Control of permanent-magnet generators applied to variable-speed wind-energy systems connected to the grid , 2006, IEEE Transactions on Energy Conversion.

[47]  José R. Rodríguez,et al.  A Survey on Neutral-Point-Clamped Inverters , 2010, IEEE Transactions on Industrial Electronics.

[48]  A. Tani,et al.  FOC and DTC: two viable schemes for induction motors torque control , 2002 .

[49]  Jingjing Zhao,et al.  Reactive power control of wind farm made up with doubly fed induction generators in distribution system , 2010 .

[50]  Chee Wei Tan,et al.  A review of maximum power point tracking algorithms for wind energy systems , 2012 .

[51]  Bin Wu,et al.  Three-level boost converter based medium voltage megawatt PMSG wind energy conversion systems , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[52]  Frede Blaabjerg,et al.  Overview of Control and Grid Synchronization for Distributed Power Generation Systems , 2006, IEEE Transactions on Industrial Electronics.

[53]  Alfred Rufer,et al.  Uniflex-PM – a Key-Enabling Technology for Future European Electricity Networks , 2009 .

[54]  Maryam Saeedifard,et al.  A New Hybrid Modular Multilevel Converter for Grid Connection of Large Wind Turbines , 2013, IEEE Transactions on Sustainable Energy.

[55]  Xiong Xin,et al.  Research on multiple boost converter based on MW-level wind energy conversion system , 2005, 2005 International Conference on Electrical Machines and Systems.

[56]  Shigeo Morimoto,et al.  Sensorless output maximization control for variable-speed wind generation system using IPMSG , 2003 .

[57]  Hadis Morkoç,et al.  Emerging gallium nitride based devices , 1995, Proc. IEEE.

[58]  H. Banakar,et al.  Kinetic Energy of Wind-Turbine Generators for System Frequency Support , 2009, IEEE Transactions on Power Systems.

[59]  Stavros A. Papathanassiou,et al.  A review of grid code technical requirements for wind farms , 2009 .

[60]  Bin Wu,et al.  Recent Advances and Industrial Applications of Multilevel Converters , 2010, IEEE Transactions on Industrial Electronics.

[61]  Thomas Ackermann,et al.  Loss evaluation of HVAC and HVDC transmission solutions for large offshore wind farms , 2006 .

[62]  Marian P. Kazmierkowski,et al.  Direct torque control of PWM inverter-fed AC motors - a survey , 2004, IEEE Transactions on Industrial Electronics.

[63]  Bin Wu,et al.  High-power wind energy conversion systems: State-of-the-art and emerging technologies , 2015, Proceedings of the IEEE.

[64]  Aniruddha M. Gole,et al.  Modular multi-level converter based HVDC system for grid connection of offshore wind power plant , 2010 .

[65]  Elias G. Strangas,et al.  Comparative Evaluation of Direct Torque Control Strategies for Permanent Magnet Synchronous Machines , 2016 .