Viscoelastic Materials : Identification and Experiment Design

Viscoelastic materials can today be found in a wide range of practical applications. In order to make efficient use of these materials in construction, it is of importance to know how they behave w ...

[1]  Torsten Söderström,et al.  Identification of viscoelastic materials , 2000 .

[2]  Torsten Söderström,et al.  On the use of flexural wave propagation experiments for identification of complex modulus , 2003, IEEE Trans. Control. Syst. Technol..

[3]  Lennart Ljung,et al.  Optimal experiment designs with respect to the intended model application , 1986, Autom..

[4]  Bo Wahlberg,et al.  ON OPTIMAL INPUT DESIGN IN SYSTEM IDENTIFICATION1 , 2006 .

[5]  M. Mossberg,et al.  Parametric identification of viscoelastic materials from time and frequency domain data , 2001 .

[6]  Gilbert F. Lee,et al.  Improved resonance technique for materials characterization , 1983 .

[7]  Y. Berthelot,et al.  Determination of the complex Young and shear dynamic moduli of viscoelastic materials. , 2001, The Journal of the Acoustical Society of America.

[8]  Steven Kay,et al.  Fundamentals Of Statistical Signal Processing , 2001 .

[9]  M. Soula,et al.  Measurements of isothermal complex moduli of viscoelastic materials over a large range of frequencies , 1997 .

[10]  T. Söderström,et al.  Perturbation results for singular values , 1999 .

[11]  Biao Huang,et al.  System Identification , 2000, Control Theory for Physicists.

[12]  Lennart Ljung,et al.  System Identification: Theory for the User , 1987 .

[13]  Yves Rolain,et al.  Identification of Young's modulus from broadband modal analysis experiments , 2004 .

[14]  H. Kolsky.  An Investigation of the Mechanical Properties of Materials at very High Rates of Loading , 1949 .

[15]  Jonas Lindgren.  Waveform inversion of seismic reflection data through local optimisation methods , 1992 .

[16]  Stephen P. Boyd,et al.  Convex Optimization , 2004, Algorithms and Theory of Computation Handbook.

[17]  T. Pritz,et al.  Dynamic Young's Modulus And Loss Factor Of Plastic Foams For Impact Sound Isolation , 1994 .

[18]  Ruth F. Curtain,et al.  Survey paper: Transfer functions of distributed parameter systems: A tutorial , 2009 .

[19]  Norman Stephen Bordan.  Identification of parameters in distributed parameter systems , 1971 .

[20]  William R. Saunders,et al.  Adaptive Structures: Dynamics and Control , 1998 .

[21]  D. Norris,et al.  Complex-modulus measurement by longitudinal vibration testing , 1970 .

[22]  R. H. Blanc.  Transient Wave Propagation Methods for Determining the Viscoelastic Properties of Solids , 1993 .

[23]  S. Brendle,et al.  Calculus of Variations , 1927, Nature.

[24]  Torsten Söderström,et al.  Optimal sensor locations for nonparametric identification of viscoelastic materials , 2008, Autom..

[25]  B. Lundberg,et al.  Identification of complex shear modulus from measured shear strains on a circular disc subjected to a transient torque , 2008 .

[26]  Torsten Söderström,et al.  Non-parametric identification of viscoelastic materials from wave propagation experiments , 2001, Autom..

[27]  Graham C. Goodwin,et al.  Robust optimal experiment design for system identification , 2007, Autom..

[28]  Raman K. Mehra,et al.  Optimal input signals for parameter estimation in dynamic systems--Survey and new results , 1974 .

[29]  L. Hillström,et al.  ANALYSIS OF ELASTIC FLEXURAL WAVES IN NON-UNIFORM BEAMS BASED ON MEASUREMENT OF STRAINS AND ACCELERATIONS , 2001 .

[30]  Carlos S. Kubrusly,et al.  Sensors and controllers location in distributed systems - A survey , 1985, Autom..

[31]  T. Söderström,et al.  Validation of Wave Propagation Models Used in Identification of Viscoelastic Materials , 2009 .

[32]  Håkan Hjalmarsson,et al.  For model-based control design, closed-loop identification gives better performance , 1996, Autom..

[33]  C. Juhlin.  Seismic attenuation, shear wave anisotropy and some aspect of fracturing in the crystalline rock of the Siljan Ring area, central Sweden , 1990 .

[34]  L. Meirovitch.  Principles and techniques of vibrations , 1996 .

[35]  W. Hume-rothery.  Elasticity and Anelasticity of Metals , 1949, Nature.

[36]  T. Pritz,et al.  Transfer function method for investigating the complex modulus of acoustic materials: Spring-like specimen , 1980 .

[37]  Jean-Jacques Fuchs.  On estimating the order of an ARMA process , 1987, Autom..

[38]  Håkan Hjalmarsson,et al.  Closed loop experiment design for linear time invariant dynamical systems via LMIs , 2008, Autom..

[39]  B. Lundberg,et al.  Determination of Complex Modulus From Measured End-Point Accelerations of an Impacted Rod Specimen , 1993 .

[40]  Håkan Hjalmarsson,et al.  Robust Input Design Using Sum of Squares Constraints , 2006 .

[41]  Graham C. Goodwin,et al.  Good, Bad and Optimal Experiments for Identification , 2006 .

[42]  W. J. Studden,et al.  Theory Of Optimal Experiments , 1972 .

[43]  Numerical solution for the dynamic moduli of a viscoelastic bar , 1987 .

[44]  Costas Papadimitriou,et al.  Optimal sensor placement methodology for parametric identification of structural systems , 2004 .

[45]  W. P. De Wilde,et al.  Identification of the damping properties of orthotropic composite materials using a mixed numerical experimental method , 1997 .

[46]  Torsten Söderström,et al.  Improved estimation performance using known linear constraints , 2004, Autom..

[47]  Bengt Lundberg,et al.  Identification of complex moduli and Poisson's ratio from measured strains on an impacted bar. , 2004 .

[48]  B. Lundberg,et al.  Non-equilibrium split Hopkinson pressure bar procedure for non-parametric identification of complex modulus , 2005 .

[49]  Torsten Söderström,et al.  Nonparametric identification of complex modulus using a non-equilibrium SHPB procedure , 2006 .

[50]  Håkan Hjalmarsson,et al.  Identification of ARX systems with non-stationary inputs - asymptotic analysis with application to adaptive input design , 2009, Autom..

[51]  Jay H. Lee,et al.  Control-relevant experiment design for multivariable systems described by expansions in orthonormal bases , 2001, Autom..

[52]  Torbjörn Wigren.  Recursive identification based on the nonlinear Wiener model , 1990 .

[53]  J. S. Abel.  Optimal sensor placement for passive source localization , 1990, International Conference on Acoustics, Speech, and Signal Processing.

[54]  Y. Sogabe,et al.  Wave Propagation Analysis for Determining the Dynamic Properties of High Damping Alloys , 1982 .

[55]  D. Brillinger.  Time series - data analysis and theory , 1981, Classics in applied mathematics.

[56]  R. Pintelon,et al.  Identification of the constitutive equations for linear viscoelastic composite materials , 1992, [1992] Conference Record IEEE Instrumentation and Measurement Technology Conference.

[57]  Xavier Bombois,et al.  Input design: from open-loop to control-oriented design , 2006 .

[58]  Masayuki Tsuzuki,et al.  Identification of the Dynamic Properties of Linear Viscoelastic Materials by the Wave Propagation Testing , 1986 .

[59]  Margaret J. Robertson,et al.  Design and Analysis of Experiments , 2006, Handbook of statistics.

[60]  P. S. Theocaris,et al.  Propagation of stress waves in viscoelastic media , 1978 .

[61]  Magnus Mossberg,et al.  Optimal experimental design for identification of viscoelastic materials , 2004, IEEE Transactions on Control Systems Technology.

[62]  Torsten Söderström,et al.  Using boundary conditions for estimation of complex modulus from flexural wave experiments , 2005, IEEE Transactions on Control Systems Technology.

[63]  Keith R. Godfrey,et al.  Perturbation signals for system identification , 1993 .

[64]  T. Söderström,et al.  System Identification Techniques for Estimating Material Functions from Wave Propagation Experiments , 2002 .

[65]  Lennart Ljung,et al.  Some results on optimal experiment design , 2000, Autom..

[66]  Sulema Aranda,et al.  On Optimal Sensor Placement and Motion Coordination for Target Tracking , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[67]  Rik Pintelon,et al.  System Identification: A Frequency Domain Approach , 2012 .

[68]  Magnus Mossberg,et al.  IDENTIFICATION OF COMPLEX MODULUS FROM MEASURED STRAINS ON AN AXIALLY IMPACTED BAR USING LEAST SQUARES , 2000 .

[69]  Michele Meo,et al.  On the optimal sensor placement techniques for a bridge structure , 2005 .

[70]  Michel Gevers,et al.  Identification For Control: Optimal Input Design With Respect To A Worst-Case $\nu$-gap Cost Function , 2002, SIAM J. Control. Optim..

[71]  Erik G. Larsson,et al.  Nonuniform linear antenna arrays minimising Cramer-Rao bounds for joint estimation of single source range and direction of arrival , 2005 .

[72]  Frequency content in an axially impacted bar subject to boundary conditions , 2008 .

[73]  Roland Hildebrand,et al.  Identification for control: Optimal input intended to identify a minimum variance controller , 2007, Autom..

[74]  Alessandro Gasparetto,et al.  Measurement of the Isotropic Dynamic Young's Modulus in a Seismically Excited Cantilever Beam Using a Laser Sensor , 2000 .

[75]  S. Renlund.  Identification of oxytocin and vasopressin in the bovine adenohypophysis , 1978 .

[76]  Håkan Hjalmarsson,et al.  Input design via LMIs admitting frequency-wise model specifications in confidence regions , 2005, IEEE Transactions on Automatic Control.

[77]  G. F. Simmons.  Differential Equations With Applications and Historical Notes , 1972 .

[78]  D.G. Dudley,et al.  Dynamic system identification experiment design and data analysis , 1979, Proceedings of the IEEE.

[79]  Petre Stoica,et al.  Comparative Study of Rank Test Methods for ARMA Order Estimation , 2018, Statistical Methods in Control & Signal Processing.

[80]  Bengt Lundberg,et al.  Determination of mechanical material properties from the two-point response of an impacted linearly viscoelastic rod specimen , 1988 .

[81]  Michael Jackson,et al.  Optimal Design of Experiments , 1994 .