Development of the polishing tool system based on the pneumatic force servo

The deterministic polishing process is usually used to reduce the roughness and improve the form accuracy for the high precision optical part and mold surfaces. The polishing process is regarded as deterministic if the material removal during the polishing is controllable, thus the control of the polishing force is required essentially for the deterministic polishing. According to the polishing compliance principle, a position-force decoupled polishing system based on a pneumatic force servo is designed and developed. The real-time control platform consists of the data acquisition card, Labview software and Labview Real-time module is configured. With the input of Pseudo Random Binary Sequence (PRBS) signals and output force data, the system model is identified by the least square method. The PID controller is implemented and experimentally tested in the polishing system. The polishing experiments are conducted to verify the effectiveness of the polishing tool.

[1]  Oussama Khatib,et al.  A unified approach for motion and force control of robot manipulators: The operational space formulation , 1987, IEEE J. Robotics Autom..

[2]  K. Murphy,et al.  Presented at the Winter Annual Meeting of the American Society of Manufacturing Engineers, San Francisco, CA, December 1 -15, 1989. Published by ASME as PED-Vol. 38, Mechanics of Deburring and Surface Finishing Processes. KEYNOTE ADDRESS: ADVANCED DEBURRING SYSTEM TECHNOLOGY , 1998 .

[3]  Li Xiaobiao Flexible Polishing Technology for Blade of Aviation Engine , 2012 .

[4]  Di Zheng,et al.  NC polishing of aspheric surfaces under control of constant pressure using a magnetorheological torque servo , 2012 .

[5]  Ji Zhao,et al.  Modeling and analysis of the material removal profile for free abrasive polishing with sub-aperture pad , 2014 .

[6]  Fengfeng Xi,et al.  Modeling and control of automated polishing/deburring process using a dual-purpose compliant toolhead , 2008 .

[7]  Liang Liao,et al.  Adaptive Control of Pressure Tracking for Polishing Process , 2010 .

[8]  J. I. Zhao,et al.  A new method of automatic polishing on curved aluminium alloy surfaces at constant pressure , 1995 .

[9]  Fusaomi Nagata,et al.  CAD/CAM-based position/force controller for a mold polishing robot , 2007 .

[10]  K. Srinivasan,et al.  Force controller design and evaluation for robot-assisted die and mould polishing , 1995 .

[11]  Fusaomi Nagata,et al.  A desktop NC machine tool with a position/force controller using a fine-velocity pulse converter , 2009 .

[12]  Fusaomi Nagata,et al.  Impedance model force control using a neural network-based effective stiffness estimator for a desktop NC machine tool , 2009 .

[13]  Neville Hogan,et al.  Impedance Control: An Approach to Manipulation , 1984, 1984 American Control Conference.

[14]  Tsuneo Yoshikawa,et al.  Dynamic hybrid position/force control of robot manipulators--Description of hand constraints and calculation of joint driving force , 1986, IEEE Journal on Robotics and Automation.

[15]  Tsuneo Yoshikawa,et al.  Dynamic Hybrid Position/Force Control of Robot Manipulators , 1985 .

[16]  Duan Ji-hao,et al.  Polishing force control technology of aero-engine blade in belt polishing , 2012 .